Epson PixiePlus Control System for Projectors- Manuals

Epson PixiePlus Control System for Projectors– Installation Manual in PDF format online.

Manuals:

Installation Manual Epson PixiePlus Control System for Projectors

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5

Summary

Page 2 - If it does not, be sure the PixiePlus is powered.; Note; : Reprogramming any button erases the code that is already in place.

Configuration 2 – AP-60 IR Volume Control In this configuration the PixiePlus will control the volume level of the AP-60 directly withIR codes. If you have multiple audio sources, you should consider how to handle audioswitching before implementing this configuration. Connect audio devices to the AP...

Page 4 - TIP; Using the Programming Wand to Set Schedule Events; Power Off; Important; without erasing

G. Program PixiePlus: Place the wand so that it is linedup against the top of the PixiePlus bezel as shown. Besure the plastic window of the Wand which faces towardthe PixiePlus is lined up with the two small circularopenings on either side of the bezel, the one labeled“aim remote to be learned here...

Page 5 - Restoring the PixiePlus to its Default Preconfiguration

A. Connect the Programming Wand to your PC and launch the Configuration Utility asdescribed in s ection 2, steps A-B above. B. Select the Wand Time tab and verify that the clock is set to the correct time. If the wand time is not correctly set, verify that your computer's clock is correct and select...

Epson Manuals