Envision EN-780e_31MY02 - Manuals

Page 2 - For Your Safety; FCC Statement

EN-780e 2 31MY02 EN-780e For Your Safety FCC Statement This equipment has been tested and found tocomply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protectionagainst harmful interference in a residentialinstallati...

Page 3 - Precautions

EN-780e 3 31MY02 EN-780e For Your Safety Precautions • Do not use the monitor near water, e.g. near abathtub, washbowl, kitchen sink, laundry tub,swimming pool or in a wet basement. • Do not place the monitor on an unstable cart,stand, or table. If the monitor falls, it can injure aperson and cause ...

Page 4 - General Notes; Package Contents

EN-780e 4 31MY02 EN-780e For Your Safety General Notes • Do not install the monitor near heat sourcessuch as radiators or air ducts. • Do not place monitor in direct sunlight or inareas with excessive dust, mechanical vibrationor shock. • Save the original shipping carton and packingmaterials in cas...

Page 5 - Before You Operate the Monitor; Installing & Removing the Base

EN-780e 5 31MY02 EN-780e Before You Operate the Monitor Installing & Removing the Base

Page 6 - Connecting the Wires Using the Power Cord Supplied

EN-780e 6 31MY02 EN-780e Before You Operate the Monitor Connecting the Wires Using the Power Cord Supplied 1. Connect the built-in video cable into the 15-pin connector on the back of your computer andtighten the two screws. 2. Connect the power cord into your monitor's power input socket. 3. Plug t...

Page 7 - Connecting the Wires Using An Optional Power Cord (Not Supplied)

EN-780e 7 31MY02 EN-780e Before You Operate the Monitor Connecting the Wires Using An Optional Power Cord (Not Supplied) The power cord supplied with your monitor canonly be connected to a grounded electrical wallsocket or power strip. If you wish to connect your monitor to a powersupply using the p...

Page 8 - Operating Instructions; Front Panel Buttons

EN-780e 8 EN-780e 31MY02 Operating Instructions Front Panel Buttons Exit: Press this button to save changes andclose the OSD window. Brightness: Press this button to adjust thepicture’s brightness. If the OSD window isopen, this button allows you to move withinthe window and select desired functions...

Page 9 - Adjusting the OSD Settings

EN-780e 9 31MY02 EN-780e Operating Instructions Adjusting the OSD Settings 1. Press the MENU button to open the OSD window. 2. Press the < or > buttons until the desired function is highlighted. 3. Press MENU to open the function’s window. 4. Press the < or > buttons to change the settin...

Page 10 - Windows INF Driver File

EN-780e 10 31MY02 EN-780e Operating Instructions Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC1/2Bcapabilities according to the VESA DDCSTANDARD. It allows the monitor to inform thehost system of its identity and, depending on thelevel of DDC used, communicate additionalinfo...

Page 12 - Appendix; Specifications

EN-780e 12 31MY02 EN-780e Appendix Specifications CRT Size 17.0" (43.2 cm) 11.4” (29 mm) neck 0.25mm(D),0.21mm(H) dotpitch 90 degree deflec-tion Viewable image size 16.0” (40.6 cm)diagonal Preset Display area 11.8” (300 mm) X9.1” (230 mm) Dot Clock 200 MHz Maximum Resolution 1600 x 1200 pixels P...

Page 14 - Factory Preset Timing Table

EN-780e 14 31MY02 EN-780e Appendix Factory Preset Timing Table Standard Resolution (in pixels) Horizontal Frequency Vertical Frequency VGA 720 × 400 31.5 kHz 70 Hz 640 × 480 31.5 kHz 60 Hz VESA / 85 640 × 480 43.3 kHz 85 Hz 800 × 600 53.7 kHz 85 Hz 1024 × 768 68.7 kHz 85 Hz 1280 × 960 85.9 kHz 85 Hz...

Page 15 - Connector Pin Assignment

EN-780e 15 31MY02 EN-780e Appendix Connector Pin Assignment Pin Number Description Pin Number Description 1 Red 9 NC 2 Green 10 Ground 3 Blue 11 Monitor Ground 4 Ground 12 DDC-Serial Data 5 Ground 13 H-Sync 6 R-Ground 14 V-Sync 7 G-Ground 15 DDC-Serial Clock 8 B-Ground

Page 16 - Limited 3-Year Warranty

EN-780e 16 31MY02 EN-780e Limited 3-Year Warranty This is a warranty statement for Envision colormonitors including those sold within North Americaas specified. Envision Peripherals, Inc. (EPI) warrants thisproduct to be free from defects in material andworkmanship for a period of three (3) years af...