DeLonghi NSL460X - Manuals

DeLonghi NSL460X Hob – User Manual in PDF format online.

Manuals:

User Manual

User Manual DeLonghi NSL460X

Summary

Page 2 - PRODUCT LABEL; Thank you for having purchased and given your preference; Approval Requirements for Domestic Gas cooking appliances

2 2 PRODUCT LABEL Dear Customer, Thank you for having purchased and given your preference to our product. The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your app...

Page 3 - IMPORTANT SAFETY PRECAUTIONS AND RECOMMENDATIONS; in this manual, including those for surface temperatures.; This film must be removed before using the; ■ IMPORTANT: The use of suitable protective clothing/gloves is

3 3 IMPORTANT SAFETY PRECAUTIONS AND RECOMMENDATIONS IMPORTANT: This appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any non domestic application and therefore should not be used in a commercial environment.The appliance guarantee wi...

Page 6 - INSTALLATION; The appliance must be housed in heat-resistant units.; ELECTRICAL REQUIREMENTS; the load specified on the plate.

6 6 INSTALLATION CAUTION: ■ Important: The use of suitable protective clothing/gloves is recommended when handling or cleaning of this appliance. ■ This appliance must be installed in accordance with these installation instructions, local gas fitting regulations, municipal building codes, water supp...

Page 7 - Agent or a similarly qualified person in order to avoid a hazard.; E L E C T R I C D I A G R A M K E Y; C A

7 7 L N 3. The wire which is coloured brown must be connected to the terminal marked “ L ” (Live) or “ A ” (Active) or coloured Red. ■ A suitable isolating switch providing full disconnection from the mains power supply (under overvoltage category III conditions) shall be incorporated in the permane...

Page 8 - CLEARANCES; Description; The thermal protection barrier must; Figure 2c

8 8 CLEARANCES Installation clearances and protection of combustible surfaces shall comply with the current local regulations e.g. AS/NZS5601.1 (latest edition) - Gas Installations code. Measures (mm) Description A B C D E F (minimum) G (minimum) Model NSL 460 X 600 510 49 (*) 560 480 60 (**) 200 (*...

Page 9 - THIS APPLIANCE SHALL NOT BE USED AS A SPACE HEATER, ESPECIALLY IF; Overhead clearances; - In no case shall the clearance between the highest part of; Standards requirement; Temperature of nearby surfaces.; Australian and New Zealand Gas Installation Standards

9 9 (*) From top of countertop (**) Between the back edge of the cut-out and the back of the countertop. (***) From the side edge of the cut-out to any vertical combustible surface. If this distance is less than 200 mm, the surface shall be protected (in accordance with AS/NZS5601.1) to a height of ...

Page 10 - FASTENING THE COOKTOP; Rear Fixing Brackets

10 10 FASTENING THE COOKTOP Each cooktop is provided with an installation kit including brackets and screws for fastening the cooktop to benches from 30 to 40mm thick. Model NSL 460 X (fig. 3a): The kit includes two “ F ” type brackets (for the front of the cooktop), two “ R ” type brackets (for the...

Page 11 - GAS SUPPLY; model; flames in simultaneously at the; only; After connecting the gas supply, check; Gas connection for; Figure 4a

11 11 GAS SUPPLY ■ This appliance is suitable for use with Natural Gas or ULPG (Check the “gas type” sticker attached to the appliance). ■ For Natural Gas the gas supply must be regulated to obtain a pressure of 1 kPa: – with the two semi-rapid (SR) burners operating at the maximum - model NSL 460 X...

Page 12 - INSTALLATION WITH A FLEXIBLE HOSE ASSEMBLY; After connection the installer must check that the hose is

12 12 2. The operation of the appliance MUST be tested before leaving. 3. Adjust the test point pressure or supply pressure to the value which is appropriate for the gas type. 4. Turn on the appliance gas controls and light each burner. Check for a well defined blue flame without any yellow tipping....

Page 13 - TABLE FOR THE CHOICE OF THE INJECTORS; Natural Gas; To replace the injectors proceed as follows:; IMPORTANT

13 13 TABLE FOR THE CHOICE OF THE INJECTORS Natural Gas ULPG Test Point Pressure [kPa] 1.0 2.75 BURNER Injector Orifice Dia. [mm] Gas Consumption [MJ/h] Injector Orifice Dia. [mm] Gas Consumption [MJ/h] Auxiliary (AUX) 0.92 4.20 0.56 4.20 Semi-rapid (SR) 1.17 6.60 0.70 6.20 Rapid (R) ( 1 ) 1.54 11.7...

Page 14 - replace with gas regulator (see figs.; Figure 5a; Injector for; Figure 5c

14 14 ■ If the cooktop is suitable for use with Universal LPG and must be converted for use with Natural gas, before connecting to the gas main remove the appliance test point adaptor and replace with gas regulator (see figs. 4a, 4b). NOTE: Gas regulator and test point adaptor are supplied with the ...

Page 15 - MINIMUM BURNER SETTING ADJUSTMENT; Using a screwdriver turn screw “; Normally for ULPG fully tighten the adjustment screw.; LUBRICATING THE GAS TAP; Figure 6

15 15 MINIMUM BURNER SETTING ADJUSTMENT Check whether the flame spreads to all burner ports when the burner is lit with the gas tap set to the minimum position. If some ports do not light, increase the minimum gas rate setting. Check whether the burner remains lit even when the gas tap is turned qui...

Page 16 - USE and CARE; Figure 7a; M o d e l : N S L 4 6 0 X; Figure 7b; M o d e l : N S L 5 9 0 D X; NOT use or store flammable materials near this appliance.; DO NOT MODIFY THIS APPLIANCE.

16 16 USE and CARE Figure 7a M o d e l : M o d e l : N S L 4 6 0 X N S L 4 6 0 X 1 11 9 8 7 2 3 5 Figure 7b M o d e l : M o d e l : N S L 5 9 0 D X N S L 5 9 0 D X 13 12 7 8 9 10 1 6 2 3 4 CAUTION: ■ This appliance must be used only for the task it has explicitly been designed for, that is for domes...

Page 17 - GAS BURNERS; The inner and outer crown can be used together or separately.; CONTROLS DESCRIPTION; The electric ignition is incorporated in the knobs.

17 17 GAS BURNERS 1. Auxiliary (A)2. Semirapid (SR)3. Semirapid (SR)4. Rapid (R)5. Double-ring compact (DRC)6. Dual (DB) (*) (*) IMPORTANT: The Dual burner is controlled by two separate knobs; one knob for the inner crown only and one knob for the outer crown only. The inner and outer crown can be u...

Page 18 - USING GAS BURNERS; Check that the electricity is switched on to allow spark ignition.; Figure 8a

18 18 USING GAS BURNERS ■ Check that the electricity is switched on to allow spark ignition. ■ Make sure that all controls are turned to “ ” (burner off). ■ The gas flow to the burner is controlled by a tap incorporating a safety cut-off valve. If the burner flame should go out for some reason, the ...

Page 19 - wait for at; DUAL BURNER - MODEL NSL 590D X ONLY; It is composed by one inner and one outer crown:; the inner and outer crown can be used; The Dual burner can be used:

19 19 LIGHTING GAS BURNERS FITTED WITH FLAME FAILURE SAFETY DEVICE In order to light the burner, you must: 1. Turn the knob (figs. 8a - 8b) in anti-clockwise direction up to the maximum aperture (symbol “ ” ), push in and hold the knob; this will light the gas. If there is no mains electrical supply...

Page 20 - Figure 9; DUAL BURNER OPERATION / CONTROL KNOBS

20 20 1 2 1 2 1+2 1 2 1 2 1+2 Figure 9 DUAL BURNER OPERATION / CONTROL KNOBS MODEL NSL 590D X ONLY IMPORTANT: After using the dual burner check both the control knobs are in the closed “ ” (off) position.

Page 21 - COOKING HINTS FOR GAS HOBS; When deep fat frying:; cover the pan with a lid and; DO NOT; leave the pan unattended.; DO NOT; use water on the fire.; DIAMETERS OF PANS WHICH MAY BE USED ON THE BURNERS; do not use pans with concave or convex bases

21 21 COOKING HINTS FOR GAS HOBS ■ The burner must be chosen according to the diameter of the pans and energy required. ■ The largest can be used for boiling, to seal meat or foods that are cooked quickly, and the smallest for stews and sauces. ■ Always ensure that you use the correct size of saucep...

Page 22 - SMALL PAN ADAPTER - MODEL NSL 590D X ONLY; This adapter is to be placed:; used with the inner crown only; ) when using small diameter; To avoid any burner malfunction:; CORRECT

22 22 SMALL PAN ADAPTER - MODEL NSL 590D X ONLY This adapter is to be placed: ■ on top of the Dual burner ( used with the inner crown only ) when using small diameter pans, in order to prevent them from tipping over. IMPORTANT: To avoid any burner malfunction: ■ this adapter MUST be placed correctly...

Page 23 - To use the WOK, you must place the wok stand in the; The special grille for wok pans; MUST BE PLACED ONLY; over the pan-rest for the

23 23 Model: NSL 460 X (with double-ring compact burner) CORRECT WRONG WOK STAND (figs. 13a - 13b, 14a - 14b) This special grille for woks should be placed over the pan-rest for the double-ring compact or Dual burner (depending on models). Warning: ■ The flat-bottomed pans are to be placed directly ...

Page 25 - CLEANING and MAINTENANCE; GENERAL ADVICE; and disconnected from the electrical power supply.; ENAMELLED PARTS; Dry preferably with a soft cloth.; STAINLESS STEEL AND PAINTED OR SILK-SCREEN PRINTED SURFACES; Clean using an appropriate product. Always dry thoroughly.; You are advised to use a soft cloth and neutral soap.; GAS TAPS

25 25 CLEANING and MAINTENANCE GENERAL ADVICE ■ Before you begin cleaning, you must ensure that the appliance is switched off and disconnected from the electrical power supply. ■ Important: The use of suitable protective clothing/gloves is recommended when handling or cleaning of this appliance. ■ U...

Page 26 - BURNERS; Both the probe and ignition plug must be very carefully cleaned.; It is very important to check that the burner flame spreader “

26 26 BURNERS ■ These parts can be removed and cleaned with appropriate products. ■ After cleaning, the burners and their flame spreaders must be well dried and correctly ■ replaced. ■ Check that the electrode/s “ S ” (figs. 15a, 15c, 15d) next to each burner is/are always clean to ensure trouble-fr...

Page 28 - PAN SUPPORTS; These parts can be removed and cleaned with appropriate products.

28 28 PAN SUPPORTS ■ These parts can be removed and cleaned with appropriate products. ■ After cleaning, they must be well dried and correctly replaced. ■ It is very important to check that the pan supports have been correctly positioned. Failure to do so can cause serious problems. ■ The prongs of ...

Page 29 - SERVICE AND MAINTENANCE; Burner is reassembled and located correctly.; Servicing the appliance:; LUBRICATION OF THE GAS TAPS

29 29 SERVICE AND MAINTENANCE If the ignition spark fails to ignite or does not light the gas, check the following items before calling our Customer Service Centre to obtain the nearest Authorised ELBA APPLIANCES Service Agent shared services with Fisher and Paykel Australia PTY LTD (ELBA Appliances...

Page 32 - w w w . d e l o n g h i c o o k i n g a p p l i a n c e s . c o m . a u

w w w . d e l o n g h i c o o k i n g a p p l i a n c e s . c o m . a u C o d . 11 0 6 3 8 7 - ß 0 D e s c r i p t i o n s a n d i l l u s t r a t i o n s i n t h i s b o o k l e t a r e g i v e n a s s i m p l y i n d i c a t i v e .T h e m a n u f a c t u r e r r e s e r v e s t h e r i g h t , c ...