DeLonghi DEGH90BGX1 - Manuals

DeLonghi DEGH90BGX1 Hob – User Manual in PDF format online.

Manuals:

User Manual

User Manual DeLonghi DEGH90BGX1

Summary

Page 3 - PRODUCT LABEL; AS/NZS CISPR 14.1 Electromagnetic Compatibility Requirements

3 Dear Customer, Thank you for having purchased and given your preference to our product. The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance. Please k...

Page 4 - IMPORTANT PRECAUTIONS AND RECOMMENDATIONS; After use, ensure that the knobs are in the off position.

4 IMPORTANT PRECAUTIONS AND RECOMMENDATIONS FOR USE OF ELECTRICAL APPLIANCES Use of any electrical appliance implies the necessity to follow a series of fundamental rules. In particular: Never touch the appliance with wet hands or feet. Do not operate the appliance barefooted. supervision. Young chi...

Page 5 - INSTALLATION; This appliance shall be only be serviced by authorized personnel.; ELECTRICAL REQUIREMENTS; or

5 INSTALLATION CAUTION: This appliance must be installed in accordance with these installation instruc- -lations, electrical wiring regulations, - Gas Installations and ony other relevant statutory regulations. This appliance shall be only be serviced by authorized personnel. This appliance is to be...

Page 7 - CLEARANCES

7 M o d e l : D E G H 6 0 B G M o d e l : D E G H 7 0 B G M o d e l : D E G H 9 0 B G CLEARANCES Installation clearances and protection of combustible surfaces shall comply with the current local regulations e.g. AS/NZS5601 - Gas Installations code. (1) 54 mm from top of countertop. (2) At least 60 ...

Page 9 - partition; between the base of the hob and the cupboard below; mm below the workbench; surface if the cupboard is to be used for storage.; Overhead clearances; - In no case shall the clearance between the highest part of the; Standards requirement; Temperature of nearby surfaces.; Australian and New Zealand Gas Installation Stan-; mm; Clearance; Figure 5

9 The installation shall comply with the dimensions in Figures 3a, 3b or 3c and 4a, 4b or 4c, bearing in mind that: A partition between the base of the hob and the cupboard below mm below the workbench surface if the cupboard is to be used for storage. If the hob is installed over a built-in oven, t...

Page 10 - FASTENING THE COOKTOP; min; Adhesive side; Rear Fixing Brackets

10 FASTENING THE COOKTOP Each cooktop is provided with an installation kit including brackets and screws for fastening the cooktop to benches from 30 to 40mm thick.The kit includes two “ F ” type brackets (for the front of the cooktop), two “ R ” type brackets (for the rear of the cooktop) and four ...

Page 11 - GAS SUPPLY; Do NOT force the ”elbow“ rotation prior to loosening nut.; Figure 8a

11 GAS SUPPLY This appliance is suitable for use with Natural Gas or ULPG (Check the “gas type” sticker attached to the appliance). For Natural Gas the gas supply must be regulated to obtain a pressure of 1 kPa with the two semi-rapid (SR) burners operating at the maximum. For ULPG models connect th...

Page 12 - INSTALLATION WITH A FLEXIBLE HOSE ASSEMBLY; After connection the installer must check that the hose is; Figure 9

12 5. Check the minimum burner setting by quickly rotating the gas control knob from the^\!_carry out the “minimum burner setting adjustment” procedure described below. 6. If satisfactory performance cannot be obtained, the installer shall check the installation and notify the local gas supply autho...

Page 13 - TABLE FOR THE CHOICE OF THE INJECTORS

13 Natural Gas ULPG Test Point Pressure [kPa] 1.0 2.75 BURNER Injector Orifice Dia. [mm] Gas Consumption [MJ/h] Injector Orifice Dia. [mm] Gas Consumption [MJ/h] Auxiliary (AUX) 0.85 3.60 0.53 3.60 Semi-rapid (SR) 1.12 6.30 0.70 6.30 Rapid (R) 1.45 10.40 0.91 10.80 Triple-ring (TR) (*) 1.60 12.70 0....

Page 14 - IMPORTANT; Only for the models with triple-ring

14 CONVERSION PROCEDURE (to convert to Natural gas or to ULPG) REPLACING THE INJECTORS The conversion procedure must be carried out only by an authorised person. This appliance is suitable for use with Natural gas or Universal LPG (check the “gas type” sticker attached to the appliance). _ $'! To r...

Page 16 - USE and CARE; Do NOT modify this appliance.

16 USE and CARE CAUTION: This appliance must be used only for the task it has explicitly been designed for, that is for domestic cooking of foodstuffs. Any other form of usage is to be considered as inappropriate and therefore dangerous. Do not use this appliance as a space heater. Do NOT place comb...

Page 17 - M o d e l : D E G H 7 0 B G

17 GAS BURNERS 1. Auxiliary (AUX) 3.60 MJ/h 2. Semi-rapid (SR) 6.30 MJ/h 3. Rapid (R) 10.40 MJ/h (NG) " 10.80 MJ/h (ULPG) 4. Triple ring (TR) 12.70 MJ/h (NG) " 11.90 MJ/h (ULPG) CONTROL KNOBS 5. Burner 1 (Auxiliary) 6. Burner 2 (right Semi-rapid) 7. Burner 4 (Triple-ring) 8. Burner 2 (left S...

Page 18 - USING GAS BURNERS; Check that the electricity is switched on to allow spark ignition.

18 USING GAS BURNERS Check that the electricity is switched on to allow spark ignition. % $! \ > !\ \! %! \% – Symbol 0 : tap closed (burner off) – Symbol : High (maximum) – Symbol : Low (minimum) You can control the temperature by the knob to “High” (maximum) from “Low” “Minimum”. To switch o...

Page 20 - To use the WOK, you must place the wok stand in the; CORRECT; position as shown; MUST BE PLACED ONLY; over the pan-rest for; WRONG

20 CORRECT USE OF TRIPLE-RING BURNER (ONLY FOR THE MODELS DEGH70BG, DEGH90BG) \> >! To use the WOK, you must place the wok stand in the CORRECT position as shown !<! IMPORTANT: %&!<+ MUST BE PLACED ONLY over the pan-rest for the triple-ring burner. WRONG CORRECT Figure 15a Figure 1...

Page 22 - CLEANING and MAINTENANCE; GENERAL ADVICE; Do not use cleaning products with a chlorine or acidic base.; GLASS SURFACE; All traces of the cleaner must be removed with a damp cloth.; ENAMELLED PARTS; Dry preferably with a soft cloth.; GAS TAPS

22 CLEANING and MAINTENANCE GENERAL ADVICE Before you begin cleaning you must ensure that the hob is switched off. It is advisable to clean when the appliance is cold and especially when cleaning the enamelled parts. All enamelled surfaces have to be washed with soapy water or some other non-abra-si...

Page 23 - BURNERS AND GRIDS; These parts can be removed and cleaned with appropriate products.; Both the probe and ignition plug must be very carefully cleaned.; IMPORTANT WARNING

23 BURNERS AND GRIDS These parts can be removed and cleaned with appropriate products. # \ replaced. % \ correctly positioned. Failure to do so can cause serious problems. Check that the electrode “ S ?&!z>+^ - sure trouble-free sparking. Check that the probe “ T ?&!z>+^ correct ...

Page 24 - ” and the cap “; NOT; The triple-ring burner pan support; IS

24 F C Flame failureprobe “ T ” Ignitor “ S ” CORRECT POSITIONING OF THE AUXILIARY, SEMI-RAPID AND RA-PID BURNERS It is very important to check that the burner \V F ” and the cap “ C ” have been &!z+! They shall be level and must not ro-tate. Failure to do so can cause serious pro-blems. The ...

Page 25 - to be used

25 CORRECT POSITIONING OF THE TRIPLE RING BURNER (ONLY FOR THE MODELS DEGH70BG, DE-GH90BG) The triple ring burner must be correctly po-&!'+! housing as shown by the arrow. The burner correctly positioned mustnot rotate. Then position the cap “ A ” and the ring “ B ”. They shall be level. Th...

Page 26 - SERVICE AND MAINTENANCE; Burner is reassembled and located correctly.; Servicing the appliance:; LUBRICATION OF THE GAS TAPS

26 SERVICE AND MAINTENANCE If the ignition spark fails to ignite or does not light the gas, check the following items before calling our Customer Service Centre to obtain the nearest Authorised Delonghi Service Agent: Burner is reassembled and located correctly. Spark electrode and white ceramic are...