Crimestopper CS-2000 - Manuals

Crimestopper CS-2000 – Manual in PDF format online.

Manuals:

Manual Crimestopper CS-2000

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - INSTALLATION CAUTIONS & WARNINGS; BEFORE BEGINNING; remove vehicle dome light fuse while working on the vehicle.; DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED; column, or any other moving parts in the vehicle.; COMPONENT MOUNTING; Mount the red; LED; firewall or side paneling.

INSTALLATION CAUTIONS & WARNINGS BEFORE BEGINNING , check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS, ABS BRAKES, AND BATTERY). TO PREVENT A POSSIBLE DEAD BATTERY remove vehicle dome light fuse while working on the vehicle. MAKE CERTAIN TO REINSTALL FUS...

Page 3 - WIRING; Connect to RED siren wire.

WIRING RED WIRE: +12V POWER INPUT (15 Amp fuse) Connect to +12 Volt source with supplied fuse & holder. Recommended location for this connection is at the vehicle battery positive terminal. WHITE WIRE: +12V FLASHING PARKING LIGHT OUTPUT (10 Amp Max.) Connect to switched parking light wire at bac...

Page 4 - YELLOW WIRE: IGNITION SWITCHED “ON” AND “START” +12 VOLTS; Scrape away any paint or dirt from; BLACK WIRE: SENSOR GROUND; PROGRAMMING; PROGRAMMABLE OPTIONS; the feature list below. The siren will chirp for each button press.; Option # Description

WIRING YELLOW WIRE: IGNITION SWITCHED “ON” AND “START” +12 VOLTS Connect to an ignition wire (or fuse in the fuse box) that shows +12 Volts when the key in both “On” and “Start” positions. BLACK WIRE: SYSTEM CHASSIS GROUND THIS WIRE MUST BE CONNECTED TO CHASSIS METAL OF THE VEHICLE. Scrape away any ...

Crimestopper Manuals