Cleveland SET-15 - Manuals - manualsarea.com

Page 2 - FOR THE USER; IMPORTANT; THE INSTALLATION AND CONNECTION MUST COMPLY WITH THE LOCAL AND; RETAIN THIS MANUAL FOR YOUR REFERENCE.; WARNING; can cause property damage, injury or death.

FOR THE USER IMPORTANT THE INSTALLATION AND CONNECTION MUST COMPLY WITH THE LOCAL AND NATIONAL ELECTRICAL CODES. ENSURE ELECTRICAL SUPPLY CONFORMS WITH ELECTRICAL CHARACTERISTICS SHOWN ON THE RATING LABEL ALL SERVICE MUST BE PERFORMED BY A QUALIFIED CLEVELAND RANGE TECHNICIAN. RETAIN THIS MANUAL FOR...

Page 3 - INSPECTION / UNPACKING; INSTALLATION

GENERAL INFORMATION These instructions must be retained by the owner/userfor future reference. The serial plate is located on the right side of the controlhousing. Voltage, phase, amperage and wattage arestated on the plate. This equipment is built to comply with applicablestandards for manufacturer...

Page 4 - INSTALLATION CHECK

INSTALLATION CLEARANCES This unit must be installed in accordance with thefollowing clearances in order to provide properoperation and servicing of the appliance. Also, it isrecommended the unit be installed with sufficientclearances to provide proper cleaning andmaintenance. Clearances - SET-10 - R...

Page 5 - OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS 1. Ensure that the electrical supply to the skillet isturned on. 2. Before cooking, be sure that the skillet's cookingsurface is clean, and that the skillet is in the fullylowered position. 3. Place the skillet's power on/off switch to the "on"position. 4. Pre-heat ski...

Page 6 - CAUTION; CLEANING INSTRUCTIONS

CARE AND CLEANING Cooking equipment must be cleaned regularly tomaintain its fast, efficient cooking performance andto ensure its continued safe, reliable operation. Thebest time to clean is shortly after each use (allowunit to cool to a safe temperature). WARNINGS ➩ Do not use detergents orcleanser...

Page 7 - STAINLESS STEEL EQUIPMENT CARE AND CLEANING

STAINLESS STEEL EQUIPMENT CARE AND CLEANING (Supplied courtesy of Nafem. For more information visit their web site at www.nafem.org) Contrary to popular belief, stainless steels ARE susceptible to rusting. Corrosion on metals is everywhere. It is recognized quickly on iron andsteel as unsightly yell...

Page 8 - SERVICE PARTS; WARRANTY

FAUCET ASSEMBLY, SET-10 & SET-15 ITEM PART DESCRIPTION QTY. NO. NO. A SPK15 Single Pantry Faucet Kit for SET-10 DPK15 Double Pantry Faucet Kit for SET-10(Includes items 1-10) . . . . . . . . . . . . . 1 B SPK16 Single Pantry Faucet Kit for SET-15 DPK16 Double Pantry Faucet Kit for SET-15(Include...

Page 9 - MODEL SET-10 SKILLET BOTTOM

MODEL SET-10 SKILLET BOTTOM (for units built prior to August 2007) ITEM NO. PART NO. DESCRIPTION QTY. 1 SK2231500 SPHERICAL WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 2 FA21024 5/16-18 HEX. NUT . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 11 - MODEL SET-10 CONTROL HOUSING DRAWING

ITEM NO. PART NO. DESCRIPTION QTY. 1 F12 SCREW, COVER, 10 - 24 X'/2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 2 SK2234200 SPRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 3 KE52192 WASHER ....

Page 12 - MODEL SET-10 ASSEMBLY DRAWING

MODEL SET-10 ASSEMBLY DRAWING (for units built after August 2007) 5A 5B 5C 5D 48

Page 18 - SERVICING GUIDE; MAINTENANCE

SERVICING GUIDE This section contains servicing information intended for use by Authorized Service Personnel. A/ PROBLEM: Skillet fails to heat with pilot light on. Probable Cause Test and Remedy 1. Faulty contactor(s) Check coil(s) and contacts of contactor(s). Replace if necessary. 2. Faulty wirin...

Page 20 - (for units built prior

WIRING DIAGRAM, SET-10 & SET-15 208, 220 or 240V, Single or Three Phase (for units built prior to November 2005)

Page 22 - 80V, Single or Three Phase

WIRING DIAGRAM, SET-10 & SET-15 480V, Single or Three Phase (for units built prior to November 2005)

Page 23 - (for units built after

WIRING DIAGRAM, SET-10 & SET-15 208, 220 or 240V, Single or Three Phase (for units built after November 2005)

Cleveland SET-15 - Manuals

Manuals:

Manual Cleveland SET-15

Summary

Cleveland Manuals