Cleveland SGM-30-TR - Manual
Cleveland SGM-30-TR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – FOR THE USER; IMPORTANT; Standard for Connectors for Movable Gas Appliances, ANSI Z21.69; RETAIN THIS MANUAL FOR YOUR REFERENCE.; WARNING; maintenance can cause property; FOR YOUR SAFETY
- Page 3 – For your safety
- Page 4 – GENERAL; INSPECTION; VENTILATION; INSTALLATION
- Page 5 – GAS
- Page 6 – OPERATING INSTRUCTIONS; CLEANING
- Page 7 – OPERATING SUGGESTIONS
- Page 8 – CAUTION; CLEANING INSTRUCTIONS
- Page 9 – STAINLESS STEEL EQUIPMENT CARE AND CLEANING
- Page 10 – HYDRAULIC JACK ASSEMBLIES
- Page 17 – ELECTRICAL BOX
- Page 18 – PAN HINGE
- Page 19 – SPRING ASSEMBLY
- Page 22 – MAINTENANCE
SE95033 Rev. 5
1333 East 179th St., Cleveland, Ohio, U.S.A. 44110
Phone: (216) 481-4900 Fax: (216) 481-3782
Visit our web site at www.clevelandrange.com
Operators Manual
Installation, Operation & Service
Skillets
Cleveland
™
Enodis
OPEN BASE & MODULAR
GAS SKILLETS -
MODELS
SGL-30-TR
SGM-30-TR
SGL-40-TR
SGM-40-TR
BULLET FOOT (FRONT) 078160-1
FLANGED FOOT (BACK) 078161-1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
FOR THE USER IMPORTANT Post in a prominent location, instructions to be followed in the event the user smells gas. This information shall be obtained by consulting your local gas supplier. Keep appliance area free and clear from combustibles. Do not obstruct the flow of combustion and ventilation ai...
✘ 1 2 ✘ SERVICING IMPORTANT CAUTION DANGER GAS APPLIANCES For your safety Keep hands and utensils away from moving parts and pinch points. Wear protective equipment when discharging hot product. Shut off power at main fuse disconnect prior to servicing. Inspect unit daily for proper operation. Surfa...
GENERAL Installation of the unit must be accomplished byqualified installation personnel working to all applicablelocal and national codes. Improper installation of unitcould cause injury or damage. This equipment is built to comply with applicablestandards for manufacturers. Included among thoseapp...