Clarity E814CC - Manuals - manualsarea.com

Page 3 - Read and understand all instructions.; imporTanT saFeTy insTruCTions

3 Warnings: Privacy of commUnications may not be ensUred when UsinG this Phone. To maintain the compliance with the FCC’s rF exposure guideline, place the base unit at least 20cm from nearby persons. To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Read and und...

Page 5 - level. Use the phone on the lowest volume setting as possible.; BaTTery saFeTy insTruCTions; Warning: Dispose of used batteries according to the instructions.; possible special disposal instructions.

5 24. Exposure to high volume sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing. Although there is no single vol-ume setting that is appropriate for everyone, you should always use your telephone with the volume set at moderate levels and avoid prolonge...

Page 6 - paCkaging ConTenTs/loCaTion

6 Package contains the following items:• Answering Machine base station with corded handset • AC power adapter for Answering Machine base station • Telephone line cord for Answering Machine base station • Cordless Handset • Charging base for cordless handset • Belt clip for cordless handset • (2) Re...

Page 7 - connectinG the answerinG machine base station; use only the power adapter provided for the base station.; ConneCTing CorDeD Base

7 connectinG the answerinG machine base station 1 – Connect the corded handset to the base station as shown below.2 – Plug the power supply cord into the jack located on the back of the base station. Plug the other end of power supply line cord into an electrical outlet. always use the cables provid...

Page 8 - answerinG machine base station; geTTing To knoW your CorDeD Base

8 answerinG machine base station 19 18 17 15 14 12 11 10 9 8 7 13 16 6 5 2 1 4 3 geTTing To knoW your CorDeD Base

Page 9 - Lcd disPLay

9 geTTing To knoW your CorDeD Base 1 rinGer indication • Flashes when ringing. • in idle mode: ON if Answering machine is on; OFF if Answering machine is off. 2 Lcd disPLay 3 memory Keys • in dial mode: Long press to store the Store the number entered from idle mode. • in idle mode: Press to dial ou...

Page 13 - menu structure

13 menu structure In idle mode, press <oK/menU> to access the menu. Press <UP> or <down> to navigate the menu. Refer to the following for the menu structure. geTTing To knoW your CorDeD Base main menu Play messages answering sys directory caller id Log sub menu Announcement Add con...

Page 15 - maKe an eXternaL caLL; screen will then show a “P” in the number.; using your CorDeD Base

15 maKe an eXternaL caLL preparatory dialingEnter the phone number and lift up the corded handset or press <sPeaKer-Phone> to dial the number. Press <cLear/mUte> to clear the entry when entering the number.note: To insert a pause in the dialling sequence, press and hold the <RD/P> ...

Page 18 - Using the corded base:; will call

18 4. Enter the name; edit, then press <oK/menU>to save; display shows “saved”, then returns to Redial list. Delete a redial number1. Follow steps 1 and 2 in section Redial a number from the redial list.2. Press < X > to delete; number will be deleted immediately. Find the HandsetYou can...

Page 20 - View a Directory entry; –OR–; Delete a Directory entry

20 4. Edit the name or press <cLear/mUte> to backspace a character if necessary. 5. Use <down> to move cursor to the left, <UP> to move cursor to the right.6. Press <oK/menU> to save the number and display shows Enter name.7. Edit the name or press <cLear/mUte> to backs...

Page 22 - reviewed in the CID list.; record will now be edited before being saved to your directory.

22 caLLer disPLay (networK dePendent) This feature is available if you have subscribed the Caller Line Identification service with your network service provider. Your phone can store up to 10 received calls with date/time information in the base CID. The number will be shown on the LCD when the phon...

Page 23 - Phone settinGs

23 4. Press the <oK/menU> button to confirm.5. Display shows “Edit name”; key in the name using the digit keys (maximum 15 characters). If you make any mistakes, press <cLear/mUte> to backspace a character. Press <UP> or <down> to insert characters. 6. When you have finished ...

Page 24 - set the Base language; rinGer setUP; rings to indicate current level.

24 set the Base language In Idle: 1. Press <oK/menU> and <UP/down> to select Settings.2. Press <UP/down> to seLect Lcd LanGUaGe.3. Press <oK/menU> to confirm the setting; display shows Saved, you will hear a beep; display goes back to the previous menu. rinGer setUP Change ri...

Page 26 - On the cordless handset:

26 Clear the voicemail icon on your screennote: This feature applies if you have voicemail service from your local phone service pro- vider; it refers to the small envelope icon on your screen. In Idle: 1. Press <oK/menU> and <UP/down> to select Settings.2. Press <oK/menU> and <...

Page 27 - answerinG system

27 5. When process is finished, handset display shows “Handset registered” briefly, after which it shows “Handset X” (X is the handset number). De-register HandsetsYou may need to do this if you need to replace a faulty handset. You will need to de-register all handsets, then re-register each handse...

Page 28 - oGm settinGs; the display shows “Annc deleted”.; answerinG machine messaGes; using the direct key; In idle

28 3. Press <oK/menU> and <UP/down> to select between ON and OFF.4. Press <oK/menU> to confirm. oGm settinGs record your outgoing message (announcement)When you record your own announcement, it will be used when the answering machine answers the call. If your personalized announcem...

Page 29 - message during message playback.; Remarks; finished you will hear “Recorded” followed by a beep.; will return to idle mode.

29 the beginning, or press twice to skip back to the previous message during message playback. 4. Press <sKiP forward / int> if you want to skip forward to the next message during message playback. 5. Press < X > if you want to delete the current message being played. note: You cannot de...

Page 30 - answerinG machine settinGs

30 At any time if you want to pick up the call, you can lift up the corded handset or press <sPeaKerPhone> to intercept the call and talk to the caller directly. The message recording will be stopped automatically. If the answering machine is in the pro-cess of recording, the message already s...

Page 33 - User Guide

Page 34 - note: Use only nimh rechargeable batteries.; CorDless HanDseT insTallaTion

34 step 1: Connecting the charging base station• Locate the charging station (a) in close proximity to the corded base station and plug the power supply cord into an electrical outlet. step 2: install rechargeable batteries• Remove the battery compartment cover (b) by pushing down with thumb and sli...

Page 35 - geTTing To knoW your CorDless HanDseT

35 2 13 14 15 16 3 4 5 7 8 6 9 10 11 17 12 1 geTTing To knoW your CorDless HanDseT

Page 37 - microPhone

37 7 aLPhanUmeric KeyPad, * (star), # (PoUnd) • in idle or editing mode: Press to insert a digit/character. • 0 key: While entering the directory names, press to insert a space. • 1 key: While reviewing a caller ID history entry, press repeatedly to add or remove 1 in front of the telephone number b...

Page 38 - • Refer to point 4 for the key instruction

38 geTTing To knoW your CorDless HanDseT 14 earPiece 15 voLUme UP / directory / scroLL UP • Refer to point 4 for the key instruction 16 voLUme down / directory / scroLL down • Refer to point 6 for the key instruction 17 headset JacK • We recommend the Plantronics™ headsets M210C©, M214©.

Page 39 - icons

39 geTTing To knoW your CorDless HanDseT The screen display gives you information on the current status of the telephone. icons description The speakerphone is turned on. While reviewing the call list history, missed calls that have not been reviewed. The ringer is switched off. New message in the a...

Page 40 - menU strUctUre

40 menU strUctUre In idle mode, press <menU/seLect>, then <UP/down> to browse the menu items. Refer to the following for the menu structure. geTTing To knoW your CorDless HanDseT main Play answering caller menu messages system directory id Log intercom sub Announcement Review Review menu...

Page 41 - keystroke table; automatically capitalized.; characters by number of key presses

41 geTTing To knoW your CorDless HanDseT The following table shows you where each letter and punctuation character can be found. This will be helpful when storing a name in the directory.In editing mode, a cursor is displayed to indicate the current text entry position. It is positioned at the right...

Page 42 - aUdio tone settinGs; To turn on this feature; AUDIO BOOST icon appears until you turn off this feature.; To turn off this feature; Volume Control (earpiece and speakerphone); During a call; using your CorDless HanDseT

42 aUdio tone settinGs Use this feature to change the quality of the audio of the handset to best suit your hearing.While you are on a call, press tone repeatedly to select an equalizer setting: Bass, Natural, Treble 1 or Treble 2, (the default setting is Natural). The tone setting remains set until...

Page 43 - To mute the call; answer the second waiting call.; To unmute the call; empty, the screen shows the speed dial list instead.; Call from Directory

43 To mute the call During a call, Press <mUte/X>. When mute is on, the handset screen shows muted for a few seconds and the mUte icon appears until you turn off mute. Or mute is auto-matically canceled when you end the call.note: Mute will also be canceled automatically when you press <TAL...

Page 47 - During an external call; nection with the external caller.

47 handset X”. The other handset rings and its screen shows “handset X is calling”.3. The called handset rings. Press <taLK on/fLash> or <sPeaKer> on the called handset to establish the internal call. Transfer an external Call from Handset to Handset During an external call 1. Press <...

Page 48 - add a new directory entry; Copy a number from redial list; the first letter in the name.

48 add a new directory entry In idle mode, press <menU/seLect>, then <UP/down> to select Directory.1. Press <menU/seLect>, then <UP/down> to select Add contact.2. Press <menU/seLect>, then use the keypad to enter the number. –OR– Copy a number from redial list <menU/...

Page 49 - shows the entry that matches the next letter in the directory.; without deleting the selected entry.; automatically clear the speed dial location that entry occupied.

49 If you press 5 ( JKL) once, J displays. Press <down>. Jessie displays.If you press 5 ( JKL) twice, K and then Kevin displays.If you press 5 ( JKL) three times, L and then Linda displays.If you press 5 ( JKL) five times, J displays and then Jennifer displays again.note: If you press a key (0...

Page 50 - add a sPeed diaL nUmber; If the directory is empty, when you press

50 using your CorDless HanDseT add a sPeed diaL nUmber 1. In idle mode, press <menU/seLect>, then <UP/down> to select Directory.2. Press <menU/seLect>, then <UP/down> to select Speed dial.3. Press <menU/seLect>, then <UP/down> to select an empty speed dial locatio...

Page 51 - might intentionally block their names and/or telephone numbers.

51 caLLer id disPLay (networK dePendent) This product supports caller ID services offered by most telephone service providers. If you have subscribed to Caller ID service, and provided the identity of the caller is not withheld, the number of the caller will be displayed together with the date and t...

Page 52 - reasons for missing caller iD information; number in a different format.

52 reasons for missing caller iD information screen messaGe reason Private name The caller prefers not to show the name Private number The caller prefers not to show the telephone number. Private caller The caller prefers not to show the name and telephone number Unknown name Your telephone service ...

Page 53 - handset settinGs

53 using your CorDless HanDseT You may choose the desired number format for local and long distance numbers before dialing or saving it into the directory.The NEW icon is removed once the new call has been viewed. store a CiD number into the DirectoryFollow Steps 1 and 2 in the View the CID Entries ...

Page 54 - appear on the handset screen.; Clear voicemail indication; icon it does not delete your voicemail messages. As; To manually turn off the new voicemail indicator; provider for assistance

54 using your CorDless HanDseT Voicemail waiting (visual message waiting) indicatorIf you subscribe to a voicemail service offered by your telephone service provider, this feature provides a visual indication when you have new voicemail messages. New voice-mail and appear on the handset screen. Clea...

Page 56 - TrouBlesHooTing

56 If you have difficulty with your corded base or cordless handset, please try the following suggestions. The unit does not record new messages. • Check that the power cord is plugged-in to a working electrical outlet. • Ensure that the answering machine is powered-on. The caller cannot leave a mes...

Page 62 - Use only NiMH rechargeable batteries.; handset charGer base; TeCHniCal speCiFiCaTions

62 answerinG machine base station Amplified dB Level: 40dBDimensions: Base size: 8-1/4” x 6-3/4” x 2-1/4” (H x W x D)Weight: Base Weight: 25.73 oz. (with corded handset)power requirements: – AC Adapter: (Sunstrong, part number SSA-5AP-09 US 060045) – Input: 100V - 240V, 200mA – Output: 6VDC, 450 mA ...