Clarity D714 Manual - Free PDF Download

Page 2 - TABLE OF C ONTENTS

4 1 Important Safety Instructions..........................................................4 INSTALLATION Installing your phone - Base.............................................................8Installing batteries - Handset...........................................................9 OVERVIEW Hand...

Page 4 - electrical shock. Never spill liquid of any kind on the telephone.; IMPORTANT SAFETY INSTRUCTIONS

4 5 Privacy of communications may not be ensured when using this phone. Warning: To maintain the compliance with the FCC’s RF exposure guideline, place the base unit at least 20 cm from nearby persons.Warning: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Re...

Page 5 - BATTERY SAFETY INSTRUCTIONS; PLEASE RETAIN A COPY OF PROOF OF PURCHASE FOR YOUR; Location; PACKAGING C ONTENTS/LOCATION

6 7 cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your telephone with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less ...

Page 6 - Connecting the base station; ) Always use the cables provided in the box.; Use only NiMH rechargeable batteries.; INSTALLING YOUR PHONE

8 9 Connecting the base station 1) Plug the power supply & line cord into the base station.2) Plug the other end of power supply & line cord into the wall socket, as shown. 3) Always use the cables provided in the box. 1) Slide out the battery compartment cover.2) Place the two batteries as ...

Page 7 - ID history, press to delete and individual entry.; HANDSET OVERVIEW

10 11 HANDSET OVERVIEW 1. RD/P (REDIAL / PAUSE) • In idle mode, press repeatedly to view the last numbers dialed • While entering numbers, press and hold to insert a dialing pause (P) 2. BOOST During a call, press to enhance the clarity and loudness of your caller’s voice. 3. MUTE / X (REMOVE) • Dur...

Page 9 - BASE OVERVIEW

14 15 1. DEL (DELETE) • Press once to delete the message during playback.• While in standby, press twice to delete all old messages.• Note: New voice messages will not be deleted. 2. VOL + (VOLUME UP) Increase speaker volume during message playback. 3. ANSWERING MACHINE (TAM) (on/off) • Press to tur...

Page 10 - Message window displays

16 17 Message window displays See the table below for other message window displays. 0 There are no messages in the answering system. 0 ( flashing) After a power failure, the number in the message window flashes to indicate the date and time need to be set. 0-6 Telephone base ringer volume while adj...

Page 11 - Flashes when low battery power level is detected,; MENU STRUCTURE; after a short pause.; Keystroke Table; Characters by number of key presses; When entering a name in the directory, the first letter of each word; Audio Tone Settings; HANDSET MENU STRUCTURE

18 19 Flashes when low battery power level is detected, needs charging. Animation in cycle, battery is charging. MENU STRUCTURE In idle mode, press <MENU/SELECT>, then <UP/DOWN> to browse the menu items. Refer to the following for the menu structure. Main Menu Play messages Answering sys...

Page 13 - USING YOUR PHONE

22 23 1. Pre-dialing Enter the phone number first, then press <TALK ON/FLASH> or <SPEAKER> to dial out the number. Press <TALK OFF/CLEAR> or <MUTE/X> to clear the entry. 2. Direct Dialing Press <TALK ON/FLASH> or <SPEAKER> to access dial tone, then enter the phone...

Page 14 - To Review the redial list entry; Find the Handset

24 25 the directory, call log or redial list while you are on a call.Chain dialing can be useful if you wish to access numbers other than phone numbers (such as bank account information or access codes) from the directory, call log or redial list. To access a number in the directory while on a call:...

Page 18 - SPEED DIAL NUMBERS

32 33 Delete the Speed Dial Number 1. In idle mode, press <MENU/SELECT>, then <UP/DOWN> to select Directory . 2. Press <MENU/SELECT>, then <UP/DOWN> to select Speed dial . 3. Press <MENU/SELECT>, then <UP/DOWN> to scroll to a speed dial location. 4. Press <MUTE...

Page 19 - View the Call Log Entries; CALLER ID DISPLAY

34 35 Screen message Reason Private name The caller prefers not to show the name Private number The caller prefers not to show the telephone number. Private caller The caller prefers not to show the name and telephone number Unknown name Your telephone service provider cannot determine the caller’s ...

Page 21 - HANDSET SETTINGS

38 39 2. Press <MENU/SELECT>, then <UP/DOWN> to select Ringer tone . 3. Press <MENU/SELECT>, then <UP/DOWN> to select the desired ringer tone (a total of 10 melodies for your selection) for setting ringer tone for external calls. Note: The respective ringer tone will be playe...

Page 22 - until you hear a beep.; Register a handset; REGISTER/DEREGISTER HANDSETS

40 41 separately.The handsets provided within your product box are already registered as HANDSET 1 and so forth. Additional handsets are assigned numbers in the order they are registered ( HANDSET 2 to HANDSET 5 ). When first purchased, all expansion handsets alternately display • Press FIND on base...

Page 23 - ANSWERING SYSTEM

42 43 The answering system can record up to 99 messages, depending on the length of each message. Individual messages can be up to the time you set (see Recording time , individual memos can be up to three minutes), and the approximate recording time is 14 minutes. The actual recording time depends ...

Page 26 - ANSWERING SYSTEM SETTINGS

48 49 Remote Access Code To access your answering system remotely from any touch-tone telephone, you need to enter a two-digit number (00-99). Unless you change it, the remote access code is 19.To change the remote access code: 1. In idle mode, press <MENU/SELECT>, then <UP/DOWN> to sele...

Page 27 - My telephone doesn’t work at all; Make sure the power cord is securely plugged in.; I cannot get a dial tone; First try all the suggestions above.; TROUBLESHOOTING

50 51 Note: • If you do not enter a valid remote access code, the system answers the call automatically. • If the date and time are not set when a message is recorded, the system announces, “Time and date not set.” • If there are no messages in the answering system, the system announces, “You have n...

Page 28 - I cannot dial out; First try all the suggestions in the item; Ensure that the telephone base is powered up.; I experience poor sound quality when using the speakerphone; to temporarily turn your microphone off. When it is; I hear other calls while using my telephone

52 53 I cannot dial out • First try all the suggestions in the item I cannot get a dial tone . • Make sure you have a dial tone before dialing. The cordless handset may take a second or two to find the telephone base and produce a dial tone. This is normal. Wait an extra second before dialing. • Che...

Page 29 - My cordless handset does not ring when I receive a call; Make sure that the ringer is not turned off.; My caller ID isn’t working; Your caller must be calling from an area that supports caller ID.; My telephone does not receive caller ID when on a call; Your telephone has voicemail indication. If; New voicemail; and

54 55 My cordless handset does not ring when I receive a call • Make sure that the ringer is not turned off. • Make sure the telephone line cord is plugged securely into the telephone base and the telephone wall jack. Make sure the power cord is securely plugged in. • The cordless handset may be too...

Page 30 - Dimensions; TECHNICAL INFORMATION

56 57 ADDITIONAL HANDSETS (optional) To identify the model number of your phone: • Turn the base of your phone upside down. • Locate the colored round label on your base. • Orange label: D714™, up to 40dB of gain • Green label: D712™, up to 30dB of gain. name of the additional handset(s) that works ...