Chicago Electric 90045 - Manuals

Page 2 - cOntentS; iMpOrtant SaFetY; general pOwer tOOl SaFetY

Page 2 For technical questions, please call 1-800-444-3353. SKU 90045 cOntentS iMpOrtant SaFetY inFOrMatiOn .................................3 general pOwer tOOl SaFetY warningS ........................................... 3 Belt Sander SaFetY warningS .... 5ViBratiOn SaFetY ............................

Page 3 - SaVe thiS Manual; general power tool Safety warnings; the presence of flammable liquids,

Page 3 For technical questions, please call 1-800-444-3353. SKU 90045 SaVe thiS Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 4 - under the influence of drugs, alcohol; Safety

Page 4 For technical questions, please call 1-800-444-3353. SKU 90045 increased risk of electric shock if your body is grounded. do not expose power tools to rain c. or wet conditions. Water entering a power tool will increase the risk of electric shock. do not abuse the cord. never use d. the cord ...

Page 5 - qualified repair person using only; Belt Sander Safety warnings

Page 5 For technical questions, please call 1-800-444-3353. SKU 90045 disconnect the plug from the c. power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power to...

Page 6 - Vibration Safety; SaVe theSe

Page 6 For technical questions, please call 1-800-444-3353. SKU 90045 Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock.WARNING: Some dust created by power 9. sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known [to the...

Page 7 - grOunding; Check with a qualified electrician; double insulated tools: tools with; satisfies OSHA requirements and; extension cords; Grounded

Page 7 For technical questions, please call 1-800-444-3353. SKU 90045 grOunding tO preVent electric ShOck and death FrOM incOrrect grOunding wire cOnnectiOn: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. do not modify the power cord plug provid...

Page 8 - Protect the extension cords from sharp; Symbology

Page 8 For technical questions, please call 1-800-444-3353. SKU 90045 Protect the extension cords from sharp 8. objects, excessive heat, and damp or wet areas. recOMMended MiniMuM wire gauge FOr extenSiOn cOrdS* (120/240 VOlt) naMeplate aMpereS (at full load) extenSiOn cOrd length 25’ 50’ 75’ 100’ 1...

Page 9 - SpeciFicatiOnS; unpacking; Pull out on the Tension Lever of the Front

Page 9 For technical questions, please call 1-800-444-3353. SKU 90045 SpeciFicatiOnS Electrical Input 120 V~ / 60 Hz / 7.5 A (Rated)Belt Speed 1,250 FPM (No Load) Belt Size 3” x 21” Accessories Dust Bag / 120 Grit Belt e194601 unpacking When unpacking, make sure that the item is intact and undamaged...

Page 10 - to attach the dust Bag:; Operating inStructiOnS; tool Set up; To start the Belt Sander, depress the; “ON”; Prior to using the Belt; work piece and work area Set up; Make sure the workpiece is free from; general Operating instructions

Page 10 For technical questions, please call 1-800-444-3353. SKU 90045 off the Belt Sander. (See Figures a and B.) to attach the dust Bag: DUST BAG (69) Figure c To attach the Dust Bag (69), simply clip the opening of the Dust Bag onto the Dust Port located on the Left Housing (18). (See Figure C.) ...

Page 11 - Switch Lock to run the Belt Sander in its

Page 11 For technical questions, please call 1-800-444-3353. SKU 90045 warning! when sanding a 2. workpiece, always push and pull the Belt Sander over the workpiece with both hands firmly gripping the tool. Do not pass hands or fingers directly in front of, to the rear, or below the Sanding Belt (46...

Page 12 - Procedures not specifically; lubrication; dull or damaged Sanding Belt; Lift out the Carbon Brush to inspect.; replaced only by a qualified service

Page 12 For technical questions, please call 1-800-444-3353. SKU 90045 Maintenance and SerVicing Procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS injurY FrOM accidental OperatiOn: turn the trigger of the tool off and unplug the...

Page 13 - troubleshooting; problem; disconnect power supply before service.

Page 13 For technical questions, please call 1-800-444-3353. SKU 90045 troubleshooting problem possible causes likely Solutions Tool will not start. Cord not connected. 1. No power at outlet. 2. Tool’s thermal reset breaker 3. tripped (if equipped).Internal damage or wear. 4. (Carbon brushes or swit...

Page 14 - pleaSe read the FOllOwing careFullY; partS liSt; individually as replacement parts.

Page 14 For technical questions, please call 1-800-444-3353. SKU 90045 part description 1 Close Cover (18) 2 Bearing (626) 3 Shaft Gear 4 Bearing (608) 5 Dust Suction Cover 6 Fan 7 Screw (ST3.8 x 16) 8 Plain Washer (8) 9 Cover Board 10 Large Belt Wheel 11 Belt Cover 14 Power Cord 15 Cable Plug 17 Pr...

Page 15 - aSSeMBlY diagraM; DUST B

Page 15 For technical questions, please call 1-800-444-3353. SKU 90045 aSSeMBlY diagraM reV 04l, 10e 65 64 63 62 33 67 4 58 4 56 48 47 54 37 70 23 52 53 41 32 68 29 30 31 24 28 27 26 25 20 38 49 55 23 22 21 20 19 66 18 40 34 35 36 37 42 43 44 45 46 33 7 17 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 69: DUS...