Chicago Electric 90045 - Manual
Chicago Electric 90045 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – cOntentS; iMpOrtant SaFetY; general pOwer tOOl SaFetY
- Page 3 – SaVe thiS Manual; general power tool Safety warnings; the presence of flammable liquids,
- Page 4 – under the influence of drugs, alcohol; Safety
- Page 5 – qualified repair person using only; Belt Sander Safety warnings
- Page 6 – Vibration Safety; SaVe theSe
- Page 7 – grOunding; Check with a qualified electrician; double insulated tools: tools with; satisfies OSHA requirements and; extension cords; Grounded
- Page 8 – Protect the extension cords from sharp; Symbology
- Page 9 – SpeciFicatiOnS; unpacking; Pull out on the Tension Lever of the Front
- Page 10 – to attach the dust Bag:; Operating inStructiOnS; tool Set up; To start the Belt Sander, depress the; “ON”; Prior to using the Belt; work piece and work area Set up; Make sure the workpiece is free from; general Operating instructions
- Page 11 – Switch Lock to run the Belt Sander in its
- Page 12 – Procedures not specifically; lubrication; dull or damaged Sanding Belt; Lift out the Carbon Brush to inspect.; replaced only by a qualified service
- Page 13 – troubleshooting; problem; disconnect power supply before service.
- Page 14 – pleaSe read the FOllOwing careFullY; partS liSt; individually as replacement parts.
- Page 15 – aSSeMBlY diagraM; DUST B
Belt Sander
3” x 21”
Model
90045
Set up and Operating inStructiOnS
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SaVe thiS Manual.
Copyright
©
2003 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual revised 10e
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 For technical questions, please call 1-800-444-3353. SKU 90045 cOntentS iMpOrtant SaFetY inFOrMatiOn .................................3 general pOwer tOOl SaFetY warningS ........................................... 3 Belt Sander SaFetY warningS .... 5ViBratiOn SaFetY ............................
Page 3 For technical questions, please call 1-800-444-3353. SKU 90045 SaVe thiS Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...
Page 4 For technical questions, please call 1-800-444-3353. SKU 90045 increased risk of electric shock if your body is grounded. do not expose power tools to rain c. or wet conditions. Water entering a power tool will increase the risk of electric shock. do not abuse the cord. never use d. the cord ...
