Chicago Electric 40764 - Manuals

Page 2 - Specifications; Note

SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 2 & 91905 Specifications Model 40764 93752 91905 Capacity 4.1 HP, 8,000 lb. 4.5 HP, 9,000 lb. 4.8 HP, 10,000 lb. Cable 100’ L x 3 / 8 ” dia. Galvanized, Aircraft Type Brake Automatic Load-holding Type Mounting Pattern 1...

Page 3 - powered tools in the presence of flammable gases or liquids.; weight capacity for your model (see Specifications on page 2).

SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 3 & 91905 Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write...

Page 4 - Do not operate tool if under the influence of alcohol or drugs

SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 4 & 91905 intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly ...

Page 5 - Mounting Option 1: Mounting the Solenoid to the Mounting Frame (1)

SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 5 & 91905 Unpacking When unpacking, check to make sure all parts are included. Refer to the Assembly Diagrams and Parts Lists at the end of this manual. If any parts are missing or broken, please call Harbor Freight Too...

Page 6 - OUT

SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 6 & 91905 Mounting Option 2: Mounting the Solenoid to the Solenoid Bracket (40) Remove both Bolts (12) and Nuts (13) from the Motor End Bearing Ass’y (33). Then align the Solenoid Bracket (40) with the 2 mounting holes....

Page 7 - Operation; Reengage the clutch by moving the Cam Ring to the; IN; before reversing directions.; seconds at a time it may cause damage to the winch’s brake system.; You; MUST; leave at least five full turns of cable on the drum; STOP THE WINCH IMMEDIATELY; and release

SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 7 & 91905 Operation 1. Disengage the clutch by moving the Cam Ring (11) to the OUT position. 2. Grab the Cable Assembly (36) hook and pull the cable to the desired length, then attach to item being pulled. Make certain ...

Page 8 - Maintenance; Lubrication; Note how the existing cable is connected to the inside of the drum.; ment part from Harbor freight Tools.; Cover the Cable Assembly and Electric Winch when not in use.; Troubleshooting; Only a qualified technician should attempt to repair this unit.; SYMPTOM

SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 8 & 91905 Maintenance Lubrication 1. All moving parts within the Electric Winch have been lubricated using high temperature lithium grease at the factory. No internal lubrication is required. 2. Lubricate the cable port...

Page 9 - When ordering parts, reference the appropriate number as follows:

SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 9 & 91905 Parts Lists and Diagrams Winch Parts List IMPORTANT! When ordering parts, reference the appropriate number as follows: Sku 40764 - 8,000 lb.= 87495 Sku 93752 - 9,000 lb.= 87478 Sku 91905 - 10,000 lb.= 87496 NO...

Page 10 - Winch Diagram

SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 10 & 91905 Winch Diagram

Page 11 - Roller fairlead Parts List; Roller fairlead Diagram

SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 11 & 91905 Roller fairlead Parts List IMPORTANT! When ordering parts, reference the appropriate number as follows: Sku 40764 uses a single piece hawse fairlead instead, don’t order from this list. Sku 93752 - 9,000 lb.=...

Page 12 - Solenoid Parts List; Solenoid Diagram

SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 12 & 91905 Solenoid Parts List IMPORTANT! When ordering parts, reference the appropriate number as follows: Sku 40764 - 8,000 lb.= 87495 Sku 93752 - 9,000 lb.= 87478 Sku 91905 - 10,000 lb.= 87496 Item Description Q’ty 1...

Page 13 - LIMITED 90 DAY WARRANTY; vary from state to state.

SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 13 & 91905 LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free fro...