Chicago Electric 40764 - Manual
Chicago Electric 40764 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Specifications; Note
- Page 3 – powered tools in the presence of flammable gases or liquids.; weight capacity for your model (see Specifications on page 2).
- Page 4 – Do not operate tool if under the influence of alcohol or drugs
- Page 5 – Mounting Option 1: Mounting the Solenoid to the Mounting Frame (1)
- Page 6 – OUT
- Page 7 – Operation; Reengage the clutch by moving the Cam Ring to the; IN; before reversing directions.; seconds at a time it may cause damage to the winch’s brake system.; You; MUST; leave at least five full turns of cable on the drum; STOP THE WINCH IMMEDIATELY; and release
- Page 8 – Maintenance; Lubrication; Note how the existing cable is connected to the inside of the drum.; ment part from Harbor freight Tools.; Cover the Cable Assembly and Electric Winch when not in use.; Troubleshooting; Only a qualified technician should attempt to repair this unit.; SYMPTOM
- Page 9 – When ordering parts, reference the appropriate number as follows:
- Page 10 – Winch Diagram
- Page 11 – Roller fairlead Parts List; Roller fairlead Diagram
- Page 12 – Solenoid Parts List; Solenoid Diagram
- Page 13 – LIMITED 90 DAY WARRANTY; vary from state to state.
ELECTRIC WINCH
12 VOLT
Models
40764, 93752,
& 91905
ASSEMBLY AND OPERATION INSTRUCTIONS
Model 91905 shown. Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed Exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INjURY,
READ AND UNDERSTAND ALL WARNINgS
AND INSTRUCTIONS BEfORE USE.
Copyright
©
2004, 2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
for technical questions and replacement parts, please call 1-800-444-3353.
Manual revised 07k, 08h
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 2 & 91905 Specifications Model 40764 93752 91905 Capacity 4.1 HP, 8,000 lb. 4.5 HP, 9,000 lb. 4.8 HP, 10,000 lb. Cable 100’ L x 3 / 8 ” dia. Galvanized, Aircraft Type Brake Automatic Load-holding Type Mounting Pattern 1...
SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 3 & 91905 Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write...
SKUs 40764, 93752, for technical questions, please call 1-800-444-3353. Page 4 & 91905 intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly ...
