Chicago Electric 44829 - Manual
Chicago Electric 44829 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Wear an ANSI approved face shield when producing metal filings.
- Page 3 – Do not operate tool if under the influence of alcohol or drugs; qualified technician.
- Page 4 – UnpACKing; cover of this manual.; OperATiOn; in until ready to cut.; Before using the saw always:; of these blade guards must be in place when the tool is being used.
- Page 5 – the tool running unattended.; miter Cuts; mAinTenAnCe; lubrication
- Page 6 – pArTS liST
- Page 7 – available individually as replacement parts.; ASSemBly drAWing
- Page 8 – limiTed 90 dAy WArrAnTy; WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
14” CUT OFF SAW
44829
SeT Up And OperATing inSTrUCTiOnS
(Blade Sold Separately)
distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SAVe THiS mAnUAl.
Copyright
©
2001 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
reV 07h
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 44829 For technical questions, please call 1-800-444-3353. Page 2 SpeCiFiCATiOnS Motor 120 V~ / 60 Hz / 1500 W / 1 Phase, 2 HP Speed 3400 RPM Blade Size 14” Diameter x 1” Arbor (Not Included) Miter Angle 0-45° Right 0-30° Left Table Size 9-3/4” x 10-1/4” Cutting Capacities Steel Pipe - 4” Dia. x...
SKU 44829 For technical questions, please call 1-800-444-3353. Page 3 maintain tools with care 9. . Inspect tool cords periodically and, if damaged, have them repaired by an authorized technician. Use the right tool for the job 10. . Do not attempt to force a small tool or attachment to do the work ...
SKU 44829 For technical questions, please call 1-800-444-3353. Page 4 reV 02d UnpACKing When unpacking, check to make sure the parts listed on page 6 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. OperATiOn Warning! Unplu...
