Chicago Electric 47991 - Manual
Chicago Electric 47991 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIONS; Save This Manual; SAFETY WARNINGS AND
- Page 4 – Figure 1
- Page 5 – Drilling; MAINTENANCE; Carbon Brush Cap
- Page 6 – PARTS LIST
- Page 7 – ASSEMBLY DRAWING
- Page 8 – LIMITED 90 DAY WARRANTY
1/2” D-HANDLE VSR DRILL
Model
47991
SET UP AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2002 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 07d, 09j, 11a
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 47991 For technical questions, please call 1-800-444-3353. SPECIFICATIONS Power 120 V~, 60 Hz, 10 A Chuck Capacity 1/16” - 1/2” Speed 0 - 800 RPM No Load Dimensions 8-5/8” W x 15-3/4” L x 6-1/4” H Power Cord 6’ Long, 18 AWG Note: Performance of this tool (if powered by line voltage) may v...
Page 4 SKU 47991 For technical questions, please call 1-800-444-3353. 21. Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch...
Page 5 SKU 47991 For technical questions, please call 1-800-444-3353. 3. With heavy leather gloves on, tug on the bit and make sure it is securely attached. Check that it is straight. Note: Always use sharp bits. Dull or damaged bits may cause undue stress on the drill and possibly break causing inj...
