Chicago Electric 47606 - Manual
Chicago Electric 47606 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Specifications; Save This Manual; dry place for future reference.; Safety Warnings and precautions; . Do not use machines or power tools in damp or wet locations.
- Page 3 – Do not operate tool if under the influence of alcohol or drugs; . If an extension cord is required, it must be of the
- Page 4 – note; unpacking; VibRATiOn HAzARD
- Page 5 – Assembly; around the tool until it rests on a flat spot on the housing, on the; FiguRE 1
- Page 7 – Operation; so the “T” setting is lined up with the mark
- Page 8 – Troubleshooting and Maintenance; by a qualified service technician.; problem; changing carbon brushes:
- Page 9 – parts list
- Page 10 – Assembly Drawing
- Page 11 – as replacement parts.; liMiTED 90 DAY WARRAnTY; INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
1” SDS ROTARY HAMMER
Model
47606
SET up AnD OpERATing inSTRucTiOnS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THiS MAnuAl.
Copyright
©
2002 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised 07c, 07j
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 47606 For technical questions, please call 1-800-444-3353. Page 2 Specifications Chuck Capacity 1 Inch Power 120 V, 60 Hz, 1.13 HP, 850 Watts Amperage 6.8 Peak Amps, 4.6 Working Amps RPM 900 Blows per minute 3,200 Accessories: Break Point (Bull) Bit, Flat Head Chisel, Depth Rod, Lubricant, Mason...
SKU 47606 For technical questions, please call 1-800-444-3353. Page 3 damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times. Disconnect power . Unplug tool when not in use. Remove adjusting keys and wrenches . Check th...
SKU 47606 For technical questions, please call 1-800-444-3353. Page 4 - Lead from lead-based paints - Crystalline silica from bricks and cement or other masonry products - Arsenic and chromium from chemically treated lumber Your risk from these exposures varies, depending on how often you do this ty...
