Chicago Electric 3223 - Manual
Chicago Electric 3223 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – . Unplug the Stud Welder while inserting the stud electrode; Inhalation Hazard; Welding/Plasma Cutting Produces toxIC fumes and gasses.; Unpacking
- Page 5 – Operation; Clean the surface down to the metal where the stud is to be welded.
- Page 6 – Troubleshooting; SYMPTOM; Maintenance; Periodically inspect line cord for cracks. Replace if necessary.
- Page 7 – Parts List
- Page 8 – Assembly Drawing
- Page 9 – LIMITED 1 YEAR / 90 DAY WARRANTY; This Limited 90 Day/1 Year Warranty shall not apply; vary from state to state.
STUD WELDER DENT REPAIR KIT
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2003 by Harbor Freight Tools
®
. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
03223
Distributed exclusively by
Harbor Freight Tools
®
.
Cover Rev 06f, 07e
TO PREVENT SERIOUS INjURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 4 SKU 3223 For technical questions, please call 1-800-444-3353. Avoid burns 22. . Do not touch the welded stud electrode or work surface until it cools. Avoid accidental activation 23. . Unplug the Stud Welder while inserting the stud electrode into the Stud Welder. 24. Avoid electrical shock. ...
Page 5 SKU 3223 For technical questions, please call 1-800-444-3353. Operation Note: Before trying to pull out a dent on your vehicle, it is recommended that you first practice welding to a scrap of metal. Also practice pulling out the dent with the Slide Hammer. Clean the surface down to the metal ...
Page 6 SKU 3223 For technical questions, please call 1-800-444-3353. Troubleshooting SYMPTOM POSSIBLE CAUSE SUGGESTED ACTION Stud does not weld; Weld area cold No power to line cord 1. Stud Welder circuit breaker open 2. Not making contact to metal surface 3. with Electrode Assy. Check power source ...
