Chicago Electric 38437 - Manual
Chicago Electric 38437 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Specifications; inch diameter; Save This Manual; Read all instructions before using this tool!
- Page 3 – across running machines.; Disconnect power. Unplug charger when not in use.; it frees up both hands to operate the tool.
- Page 4 – Unpacking; ACCESSORIES; Carbon motor brush set; Operation; Attaching Dust Bag; For efficient dust pickup, empty bag frequently.; Adjusting Front Fence
- Page 6 – Locking On/Off Switch; pushbutton on the left side of the handle.; Typical Joiner Applications; Marking Slot Locations for Standard Cuts; face as illustrated below.
- Page 7 – Marking Slot Locations for Other Types of Cuts; for the slots on all boards at the same time.; Maintenance; Disconnect tool power before cleaning.
- Page 8 – Parts List
- Page 9 – Assembly Drawings
PLATE JOINER
4 INCH
ASSEMBLY and OPERATING
INSTRUCTIONS
Distributed Exclusively by Harbor Freight Tools
®
Copyright © 1998 by Harbor Freight Tools. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
38437
3491 Mission Oaks Blvd., Camarillo, CA 93011
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page SKU 38437 Specifications Motor Speed 10,000 RPM (no load) Power rating 10 VAC at 60 Hz, single phase, 6 A Blade 4 inch diameter Fence Adjustments Max depth: 1-1/8 inches;Max. angle: 45 degrees Preset Depth Stops 0, 10, and 0 Power Cord 18 AWG, 3-prong plug Save This Manual You will need the man...
Page 3 SKU 38437 8. Use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. 9. Do not overreach....
Page 4 SKU 38437 Unpacking When unpacking, check to make sure the following parts are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. ACCESSORIES Assorted biscuits: 0, 10, 0 gauge Carbon motor brush set 4 m...
