Canon 1650- Manuals

Page 2 - Safety Notices; USA; Europe

Safety Notices AXIS 1650 User’s Manual 2 Safety Notices Take some time to read through the safety notices before installing the print server. Please observe all safety markings and instructions when using this product. Important: Observe “Important:” in the text to avoid operational impairment. Do n...

3 AXIS 1650 User’s Manual Safety Notices Liability Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform your local Axis office, which can be found on the cover of this document. Axis Communications AB cannot be held responsible for a...

Page 4 - Table of Contents; Appendix A

AXIS 1650 User’s Manual 4 Table of Contents About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About Axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Support Services . . . . . . . . . . . . . . . ...

Page 5 - Preface; About this Manual; These instructions are based on the settings in a; new; and; unconfigured; print server; About Axis

5 AXIS 1650 User’s Manual Preface Thank you for purchasing the AXIS 1650. This product has been developed to connect your printer anywhere in your network, allowing all network users access to shared printer resources. About this Manual This manual is applicable for the AXIS 1650 print server with f...

Page 6 - Support Services; If you are connected to the Internet, you can:

AXIS 1650 User’s Manual 6 Support Services Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your Axis reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected ...

Page 7 - Section 1; Package Contents

7 AXIS 1650 User’s Manual Product Overview Section 1 Product Overview Package Contents Hardware Model Model/ Part Number Network Pr int Server AXIS 1650 0214-001- XXWith firmware version 1.00 or higher Adhesive Holder & Clip ACC AXIS CLIPS K 20119 USB Ca ble 70 cm, 28 inches USB cable supports U...

Page 8 - The AXIS 1650 Network Print Server; Supported Printers; The AXIS 1650 supports printing over

Product Overview AXIS 1650 User’s Manual 8 The AXIS 1650 Network Print Server Supported Printers AXIS 1650 is developed to network Canon printers and multifunctional products. AXIS 1650 supports host-based printing methods such as Canon Advanced Printing Technology, Canon Advanced Raster Printing Sy...

Page 9 - Canon

9 AXIS 1650 User’s Manual Product Overview Installation and Integration The installation of the AXIS 1650 and its integration into the network is performed using one of these software combinations: • AXIS IP JumpStarter (for IP setting) and then AXIS CAPT Print Monitor (for printer installation) • C...

Page 10 - Printer Ports

Product Overview AXIS 1650 User’s Manual 10 Future proof: You can upgrade the AXIS 1650 Flash memory over the network. This allows you to quickly update and enhance the operational features of your AXIS 1650 when new print server software becomes available. Printer Ports • One Low and -Full speed US...

Page 11 - Section 2; Follow these steps to install and configure your AXIS 1650:; Backside label of print server; Connect the Hardware

11 AXIS 1650 User’s Manual Print Server Installation Section 2 Print Server Installation Follow these steps to install and configure your AXIS 1650: 1. Connect the Hardware Backside label of print server 1. Connect the Hardware , on page 11 2. Set the IP Address , on page 13 3. Windows Installation ...

Page 12 - serial number; , found on the underside label of the print server, and write it down.

Print Server Installation AXIS 1650 User’s Manual 12 1. Make sure that your printer is switched off and that the print server’s power adapter is disconnected. 2. Locate the serial number , found on the underside label of the print server, and write it down. You will need this number to configure the...

Page 13 - Set the IP Address; Before setting the IP address, make a note of the print server’s

13 AXIS 1650 User’s Manual Print Server Installation 2. Set the IP Address • Before setting the IP address, make a note of the print server’s serial number (S/N), located on its backside label. See Backside label of print server , on page 11. • You should obtain an unused IP address from your networ...

Page 14 - Set a Static IP Address using AXIS IP JumpStarter; address; Server; All AXIS 1650 have the default IP address

Print Server Installation AXIS 1650 User’s Manual 14 Set a Static IP Address using AXIS IP JumpStarter AXIS IP JumpStarter is an application that helps you to locate your Axis print server on the network and assign an IP address to it. 1. Install AXIS IP JumpStarter, it is available on the AXIS 1650...

Page 16 - Request time out; Default Router; Windows Installation

Print Server Installation AXIS 1650 User’s Manual 16 Set a Static IP Address using ARP in Windows 98/Me/2000/XP/2003 1. Open a Command Prompt and type: Example: 2. If the host returns Reply from 192.168.3.191 ... or a similar message, the IP address has been set successfully. If the host returns Req...

Page 17 - Set a Static IP Address using ARP in UNIX; ping

17 AXIS 1650 User’s Manual Print Server Installation Set a Static IP Address using ARP in UNIX Follow the instructions below to set the IP address using ARP. 1. Type the following commands in the shell window: Example: 2. The host will return 192.168.3.191 is alive or a similar message. This indicat...

Page 18 - Set an IP Address with NetSpot Device Installer software; Install NetSpot Device Installer; Specify the program destination folder and click; When the installation is finished, click; OK; Set the IP address

Print Server Installation AXIS 1650 User’s Manual 18 Set an IP Address with NetSpot Device Installer software NetSpot Device Installer is software from Canon that allows you to assign an IP address and manage Canon devices connected to your network. NetSpot Device Installer software is supplied on C...

Page 20 - After you have finished the configuration, click; an IP address. Continue to

Print Server Installation AXIS 1650 User’s Manual 20 5. Next, configure the TCP/IP protocol: 6. After you have finished the configuration, click OK . 7. Click OK . Your printer’s protocol configuration is now finished and your AXIS 1650 has received an IP address. Continue to Windows Installation , ...

Page 21 - IP Address Host Names; Notes

21 AXIS 1650 User’s Manual Print Server Installation IP Address Host Names If you are using host names, you can map a unique host name to the IP address. Refer to your system manuals or to your network administrator for instructions on how to perform name mapping on your system. Notes • You need to ...

Page 22 - Section 3; Installing Printer Ports using AXIS CAPT Print Monitor; See also

Windows Installation AXIS 1650 User’s Manual 22 Section 3 Windows Installation Installing Printer Ports using AXIS CAPT Print Monitor AXIS CAPT Print Monitor is a Windows component that has been developed for network printing. AXIS CAPT Print Monitor is the recommended tool for Canon printers, inclu...

Page 23 - Launch the software installation and click; Next; Read the License Agreement and click; Yes; if you accept the terms.

23 AXIS 1650 User’s Manual Windows Installation Print Server Installation using AXIS CAPT Print Monitor in Windows 2000, XP and Server 2003 1. Install the AXIS CAPT Print Monitor on your workstation. The software is available on the AXIS 1650 CD and on www.axis.com 2. Launch the software installatio...

Page 24 - Make sure the; the local subnet; checkbox is checked.; Allow this application to process

Windows Installation AXIS 1650 User’s Manual 24 4. Leave this check-box unchecked* and click Next . Windows XP/Server 2003 only: Make sure the Allow this application to process incoming network printer information on the local subnet checkbox is checked. * If you want to disable broadcast status upd...

Page 25 - Finish

25 AXIS 1650 User’s Manual Windows Installation 5. Click Finish to finish the installation. 6. Windows XP/Server 2003: Go to Start | Printers and Faxes and click the Add a Printer icon to start the Add Printer Wizard. (Windows XP Home Edition: Start | Control Panel | Printers and Faxes | Add a Print...

Page 26 - Local Printer attached to this computer.; Automatically detect and; check box is not checked. Click; Create a new port; radio-button and select

Windows Installation AXIS 1650 User’s Manual 26 7. Select Local Printer attached to this computer. Make sure the Automatically detect and install my Plug and Play printer check box is not checked. Click Next. 8. Click the Create a new port radio-button and select AXIS CAPT Port*. Click Next. * AXIS ...

Page 27 - and click

27 AXIS 1650 User’s Manual Windows Installation 9. The AXIS CAPT Port pop-up window will appear. Select your AXIS 1650 from the Available network printers list and click OK . 10. Select Manufacturer and Printer from the driver list. Click Next . 11. Choose whether you want to keep the existing drive...

Page 28 - Select the appropriate radio button and click

Windows Installation AXIS 1650 User’s Manual 28 13. Choose whether you want to share the printer with other network users, print a test page, etc. Select the appropriate radio button and click Next and Finish . 14. Print a test page to verify. You have now completed the installation.

Page 29 - and Me

29 AXIS 1650 User’s Manual Windows Installation Print Server Installation using AXIS CAPT Print Monitor in Windows 98 and Me Follow the procedure below to install TCP/IP Ports from a Windows 98/Me workstation: 1. Install the AXIS CAPT Print Monitor on your workstation. The software is available on t...

Page 30 - Enabling Unicast

Windows Installation AXIS 1650 User’s Manual 30 4. Leave this check-box unchecked* and click Next . (*If you want to disable broadcast status updates and enable unicast, See Enabling Unicast Network Communication on page 58 for instructions.) 5. Click Finish to finish the installation. 6. Select Set...

Page 34 - LPR Settings - Queue Name

Windows Installation AXIS 1650 User’s Manual 34 8. Next, from your desktop, go to Start | Printers (and Faxes). Highlight the installed printer and right-click, choose Properties, then Ports | Configure Port. 9. In the LPR Settings - Queue Name field, you will see the value "z". In the Queue...

Page 35 - Section 4; Change print server parameters; Configuration Overview; Configuration/Management methods

35 AXIS 1650 User’s Manual Print Server Management and Configuration Section 4 Print Server Management and Configuration The management and configuration tools that are supported by the AXIS 1650 allow you to: • Change print server parameters • Receive extended information about print jobs • Receive...

Page 36 - Print Server Management from the Embedded Web Pages; Address; User mode; Available Services from the User Mode; Admin mode; Available Services

Print Server Management and Configuration AXIS 1650 User’s Manual 36 Print Server Management from the Embedded Web Pages All Axis print servers contain an embedded web server that can be accessed through a web browser. The embedded web server provides access to configuration and management pages for...

Page 37 - Accessing the Embedded Web Pages

37 AXIS 1650 User’s Manual Print Server Management and Configuration Accessing the Embedded Web Pages Follow these steps to access the AXIS 1650 embedded web pages: 1. Enter the print server’s IP address (or host name) in the Location/Address field of your Web browser. Press Enter 2. The Printer Ove...

Page 38 - Printer Overview; indicates that the printer is ready for printing

Print Server Management and Configuration AXIS 1650 User’s Manual 38 Available Services from the User Mode The following services are available from the User mode. A link to www.axis.com is available from this mode. Printer Overview The Printer Overview page contains a section that allows you to vie...

Page 39 - Printer Status; supported network environment; Print Jobs; - displays the printer port to which the printer is connected.

39 AXIS 1650 User’s Manual Print Server Management and Configuration Serial Number Every Axis device is uniquely identified by its serial number. The serial number is found on the under side label of your print server. Language English and Japanese is supported in the print server's web interface. C...

Page 40 - Help; Available Services from the Admin Mode; This Print Server; Print Server Name; default values

Print Server Management and Configuration AXIS 1650 User’s Manual 40 Help The Help pages present basic information about the AXIS 1650 and the Web user interface. Available Services from the Admin Mode The following services are available from the Admin mode. An additional link to www.axis.com is av...

Page 41 - System Location

41 AXIS 1650 User’s Manual Print Server Management and Configuration System Location This parameter allows you to specify where the network printer is physically located in your organization. This enables you to find the printer to which you have sent your print jobs. Default = <blank> System ...

Page 42 - Restrictions; over the print server.

Print Server Management and Configuration AXIS 1650 User’s Manual 42 Community Name: Specify the community name for SNMP. Up to 32 alphanumeric characters can be entered. Default = public Restrictions TCP Restriction Enabled Users specified in the IP Address List are rejected or accepted, depending ...

Page 43 - specify/browse the settings for the device using the SLP protocol.

43 AXIS 1650 User’s Manual Print Server Management and Configuration SNMP Restriction Mode: • Accept Only users specified in [SNMP restriction IP address list] are permitted to specify/browse the settings for the device using the SNMP protocol. • Reject Only users specified in [SNMP restriction IP a...

Page 45 - Network Settings; From the; Detailed View; Frametype Ethernet II is used for network packages.

45 AXIS 1650 User’s Manual Print Server Management and Configuration Print Jobs From the Print Jobs page you can view Printer Usage that displays the accumulated usage of the printer connected to your print server. You can also view a log of the 32 latest print jobs that includes the user name, the ...

Page 46 - DHCP Enabled; Specify the IP address for your print server in the format

Print Server Management and Configuration AXIS 1650 User’s Manual 46 DHCP Enabled Select the appropriate radio button to enable DHCP (Dynamic Host Configuration Protocol). DHCP automatically downloads the IP address to each print server at startup. Depending on how your network has been configured, ...

Page 47 - Select

47 AXIS 1650 User’s Manual Print Server Management and Configuration Subnet Mask Specify the subnet mask used for determining when the traffic should be sent via a router. This number combined with the IP address identifies on which network the print server is located. The normal class C subnet mask...

Page 48 - which specifies the default scope.

Print Server Management and Configuration AXIS 1650 User’s Manual 48 WINS Enabled Select the appropriate radio button to enable WINS (Windows Internet Name Service) over TCP/IP. WINS uses NetBIOS names to allow Windows-based clients to locate resources on TCP/IP networks. Default value = Yes WINS Se...

Page 49 - (Only visible in English firmware version); Support

49 AXIS 1650 User’s Manual Print Server Management and Configuration SNTP update interval SNTP update interval: The interval the print server shall send a request to the Time Server for a updated time. Default = 1hours Time Zone (Only visible in English firmware version) Specify the time zone for yo...

Page 50 - Click the print server

Print Server Management and Configuration AXIS 1650 User’s Manual 50 AXIS Online Services Click the print server product page to receive information about your print server model. The product page, available on the Axis Web Site, offers you up-to-date information, print server manuals, FAQs, softwar...

Page 51 - Print Server Management Using FTP; Editing the; file; config; config

51 AXIS 1650 User’s Manual Print Server Management and Configuration Print Server Management Using FTP Having assigned an IP address to your AXIS 1650, as described in 2. Set the IP Address , on page 13, you can change the AXIS 1650 parameter settings using the File Transport Protocol (FTP). Editing...

Page 52 - Example: How to edit the; FTP Help; By typing; commands will be displayed.

Print Server Management and Configuration AXIS 1650 User’s Manual 52 Example: How to edit the config file using FTP from a Command prompt. FTP Help By typing help in step 3 in the FTP instructions described above, a list of all available files and commands will be displayed. > ftp npserver connec...

Page 53 - Print Server Management Using SNMP; General Information; The AXIS 1650 supports the following MIBs:

53 AXIS 1650 User’s Manual Print Server Management and Configuration Print Server Management Using SNMP You can use SNMP (Simple Network Management Protocol) for remotely monitoring and configuring the AXIS 1650. All major functions for print servers are supported. General Information SNMP refers to...

Page 54 - Section 5; BubbleJet

The Test Button AXIS 1650 User’s Manual 54 Section 5 The Test Button The test button is located on the front right hand side of the print server and is used to perform a Factory Default: 1. Remove the external power supply to switch off the print server.2. Press and hold down the test button, while ...

Page 55 - Section 6; The print server’s

55 AXIS 1650 User’s Manual Upgrading the Firmware Section 6 Upgrading the Firmware The print server’s firmware* is stored in its Flash memory. This memory retains data content even after the power is removed. Flash memory allows data to be erased and re-written, which is why you can install firmware...

Page 56 - This example uses these sample values:

Upgrading the Firmware AXIS 1650 User’s Manual 56 Upgrading using FTP • To upgrade over the network using FTP you will need a file with the new print server firmware. The name of this file is in the form product_version.bin . • The print server must have a valid IP address. This example uses these s...

Page 58 - Follow these steps to enable unicast network communication:; file by typing; AXIS 1610 and AXIS 1611 do not support the Unicast mode.

AXIS 1650 User’s Manual 58 Appendix A Enabling Unicast Network Communication AXIS CAPT Print Monitor uses broadcast communication, so that status information from the print server can be shared between several users without elevating network traffic. Broadcast communication is used by default in the...

Page 59 - YES

59 AXIS 1650 User’s Manual 6. Open the config file using any text editor: 7. Locate the parameter named USE_IP_PORT_NAME: type YES 8. Once the editing is complete, save the file as config 9. In the Command prompt window, upload the configuration file to the AXIS 1650 by typing put config CONFIG 10. ...

Page 62 - Appendix B; To open the Internet Connection Firewall:

AXIS 1650 User’s Manual 62 Appendix B Internet Connection Firewall in Windows XP SP2 If you have upgraded to Windows XP SP2, you need to open UDP port 10260 in the Internet Connection Firewall when using Broadcast communication. For Unicast comunication, the firewall can remain closed. To open the I...

Page 63 - On; is selected. “Don’t allow exceptions” and “Off” must be unchecked!; Exceptions; and highlight; AXIS CAPT Port

63 AXIS 1650 User’s Manual 3. Make sure On is selected. “Don’t allow exceptions” and “Off” must be unchecked! 4. Click Exceptions and highlight AXIS CAPT Port . 5. Click OK .

Page 64 - Port; and configure the port.

AXIS 1650 User’s Manual 64 Note: If you accidentally delete the AXIS CAPT Port and want to recreate it, go to Exceptions | Add Port and configure the port.

Page 65 - Technical Specifications

65 AXIS 1650 User’s Manual Technical Specifications Supported Printers AXIS 1650 is developed to network Canon printers and multifunctional products. AXIS 1650 supports host-based printing methods such as Canon Advanced Printing Technology, Canon Advanced Raster Printing System and other printer typ...

Page 67 - Environmental; EN 60950, approved power supplies for all countries.; LED indicators for Power and Network.

67 AXIS 1650 User’s Manual Environmental Temperature: 40 - 105 °F (5 - 40 °C) Approvals EMC: EN 55 024:1998 EN 55 022:1998 + A1 (CISPR 22:1997 + A1) Class B EN 61000-3-2:2000EN 61000-3-3:1995+A1VCCI:2002 Class B ITE (CISPR 22:1997 + A1:2000, Class BC-tick AS/NZS 3548 FCC part 15, subpart B, Class B,...

Page 68 - Index

AXIS 1650 User’s Manual 68 A Adhesive Clip 12 Adhesive Holder 12 Admin 36 Assistance 6 B BOOTP 44 Broadcast 62 BSD 17 BubbleJet 54 C Canon Advanced Printing Technology 1, 8, 38, 45, 65 Canon Advanced Raster Printing System 1, 8, 38, 65 Canon BubbleJet 1, 8, 65 Configuration methods FTP 51 SNMP 53 We...