Bodum F1-ACE - Manuals - manualsarea.com

Page 3 - Remote

P+ Selects the service list and used toselect the item in the menu mode. OK Returns to the previous menu andscreen. EXIT 2 Standby keySwitches between Operationand Standby mode. This key is not available for F1-ACE. Numeric keyUsed to select the service and enterthe channel information and PIN Code....

Page 4 - STB’S Specification; MPEG Transport Stream A/V Decoding; Specification

3 2. STB’S Specification Tuner & Channel Input Connector : F-type, IEC 169-24, Female Frequency Range : 950 MHz to 2150 MHz Input Impedance : 75 Ω unbalanced Signal Level : -25 to -65dBm IF Frequency : 480 MHz IF Band width : 36 MHz LNB Power &Polarisation : Vertical : +13.5V Horizontal : +1...

Page 7 - Safety

This STB has been manufactured to satisfy the international safety standards. Please read the following recommended safety precautions carefully. MAINS SUPPLY : 190 ~ 250V AC 50/60Hz. OVERLOADING : Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical sho...

Page 8 - STB Connection

7 There are several ways of connecting the STB to your existing Audio/TV system. We recommend using one of the following set-up for best results: TV only Connect one end of RCA/Cinch cable to the RCA/Cinch socket on the back of the STB and the other end to a RCA/Cinch socket on your TV. If your TV d...

Page 10 - TV with Terrestrial antenna

9 STB Connection TV with Terrestrial antenna Connect one end of RCA/Cinch cable to the RCA/Cinch socket on the back of the STB and the other end to a RCA/Cinch socket on your TV. If your TV doesn’t have a RCA/Cinch socket, connect one end of RF cable to the RF OUT on the back of the STB and the othe...

Page 12 - TV with Motorised System and Positioner; Reference

DiSEqC 1.0 Connection All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be connected to the STB at the same time. If you have two or more fixed antennas or LNBs then we recommend you use a DiSEqC 1.0 swtich.Connect the coaxial cable from the first LNB to th...

Page 13 - LED of STB

Guide of Functions 12 LED of STB The message of the LEDs(Lighting-Emitting Diode) on the STB is explained as below. Upgrade via Satellite and Personal Computer To maintain the STB up-to-date, it will be possible to upgrade the software of the STB via satellite and personalcomputer. New versions of t...

Page 15 - keys. Exit from the menu by pressing; language if; Guide of

14 Service Change To change the service, enter the number by using the 0 ~ 9 keys. It is also possible to change the service by using theP+/ P- keys, / keys, Recall, Service list or EPG mode.To switch between the video and audio service, press the key. To select the previously viewed service list, p...

Page 16 - Subtitle; keys to select the; Teletext; Service Configuration

move the cursor previous or next page exit from the Service Configuration select the favourite type or savethe changes 15 Subtitle The display of the subtitle are tramitted from the EBU teletext specification and DVB Bitmap.Press the key to bring up the subtitle language list forthe current service....

Page 17 - The

move the cursor previous or next page change Simple to Advanced list go to the selected service service list by Favourite go to the Service Configuration menu exit from the menu screen move the cursor previous or next page change Simple to Advanced list go to the selected service service list by Fav...

Page 18 - Main Menu; The contents of main menu are as follows:; Provides a Calendar and Biorhythm feature.

17 Main Menu The contents of main menu are as follows: 1. TV GUIDE It shows the programme information and the timer programming process of the service.Select the TV Guide mode by pressing the EPG keyin the Video/Audio playback mode. 2. PARENTAL CONTROL It is possible to control access to certain pro...

Page 19 - TV GUIDE - Weekly mode

move cursor for service selection previous or next page change between Now orNext programme move the highlight bar & display the service show Weekly programme list show the Reservedprogramme list Simple TV Guidereserve the programme display the selected serviceexit from the menu screen 1. TV GUI...

Page 20 - Censorship classification : Set the parental level.; new code number twice.

move the cursor select the level for blockingservicesenter the digits for PIN code exit from the menu screen return to the main menu move the cursorgo to the selected menureturn to the main menuexit from the menu screen 19 TV GUIDE-Quick mode. This mode shows in the A/V playback mode. The red line r...

Page 21 - Language List; Menu Language

move the cursorselect the language you want to set on the language list return to the previous menu exit from the menu screen select the language you want to set confirm the language and returns tothe Language Setting menu return to the language setting menu Language List move the cursorgo to the se...

Page 23 - Is for fine tuning of UHF.; Delete

22 D. UHF Tuning Channel Sets the channel to display the audio and video signal on your TV. If you select channel 36 at this menu, the satellite service will be displayed at channel 36 on your TV. PAL Standard Sets the type of PAL of your TV. This STB supports PAL I/B/G/D/K among PAL Standards. Offs...

Page 24 - Move; You can move the service to wanted position using the; Lock; code in order to view it.; Skip; You can change the service name using the

23 Move 1. You can move the service to wanted position using the (green) key. 2. The icon( ) will be marked in front of the service number.3. Select new position with the / / / keys. 4. Press the OK key.5. If you want to return to the original position, press the EXIT key. Lock 1. You can lock the s...

Page 25 - Press the OK key to save the selected group.; B. Organise Radio Services

24 Organise Favourite TV Services This mode serves to add and delete services to and from the favourite group.To add services into Favourites, locate the cursor to thedesired service and press the OK key. The function of thecolour keys is the same as Organise All Services, except forthe following di...

Page 26 - Antenna Alternative

move the cursorgo to the selected menureturn to the previous menuexit from the menu screen move the cursor select LNB frequency or parameters.In Satellite Name, selects the name on the satellite list. return to the previous menuexit from the menu screen input the LNB frequency directlygo to the manu...

Page 27 - Satellite Name; The keyboard will appear and you can input the satellite; LNB Frequency; If the required LNB frequency is not available, then select; DiSEqC Input Selection

selects the satellite name you want to findconfirm the satellite name and returnsto the antnna setting menu. If you pressOK key at ‘User Defined’, then thecharacter table will displayed and youcan input the name on the keyboard. return to the antenna setting menu exit from the menu screen 26 Satelli...

Page 28 - Motorized System; Service Search OSD; If you press the EXIT key during the search, service; Found services OSD; Then Manual Search menu appears. When you exit all

27 Motorized System It is used to set the DiSEqC 1.2 motor by Eutelsat specifica-tion. If you wish to use this system, please refer to page 34for instructions. Service Search OSD If you press the EXIT key during the search, service search stops and the searching menu appears. When you find all the s...

Page 29 - SMATV Search; Frequency; Inputs the symbol rate of the signal you want to find.; FEC

28 B. Manual Search After setting the search parameters like frequency, symbol rate etc., you can find the services manually in thetransponder you have selected. Antenna Alternative Select the target antenna for manual search. This antenna alternative number is already set in Antenna Setting menu.An...

Page 31 - You can set the PID to search the service.

move the cursorselect the searching parameters input the frequency,symbol rate or PID value directly exit from the menu screen start the advanced searchreturn to the previous menu 30 Advanced... Performs a manual search with the ability to enter PID(Video/Audio/PCR) values. This mode is necessarywhe...

Page 33 - Automatic Skip; When finishing search, the message that it is finished

32 Automatic Skip Option to search only Free-To-Air services. The above picture tries to search with varying frequency, symbol rate and FEC etc. Note: But, the user should select the satellite name in Antenna Setting menu and when the user inputs the satellite name separately, youshould select the D...

Page 35 - DiSEqC 1.2 User Instructions; Satellite Setting Menu Options; Motorised

DiSEqC 1.2 User Instructions If you have a DiSEqC 1.2 motorised system, then you can take advantage of the DiSEqC 1.2 functions available. The following instruction describes how to use the DiSEqC 1.2 functions to store the positions of the satellites andto search for the channels(STAB Rotor Sat mot...

Page 37 - Searching for channels on your selected satellite

10. Use the Signal and Strength Quality bar at the bottom of the screen to judge the best position of the dish.11. Use the / keys to stop the motor when required.12. When you have the best position of the dish go to the Motor Control option and using the / keys select Store and press the OK key. The...

Page 39 - About STB; Problem; On-Screen Error Messages

Trouble Shooting Guide About STB Problem Solution Does not display anymessage on the front panel orSTB has no power. Check the main power cable and check that it is plugged into asuitable power outlet. Check whether STB is in Standby mode. No Picture Ensure that the STB is switched on (see above). C...

Page 40 - Service Search; LED Error Message

TroubleShooting Guide 39 Service Search Problem Solution "No Signal" in manual search Check the "Signal Strength" and the "Signal Quality" in theSignal Status menu. Check the LNB - replace LNB if necessary. Check the cable from the LNB. Check the position of the dish - relign...