Adam Equipment MDW-300L - Manuals

Page 3 - Page; CONTENTS

© Adam Equipment Company 2012 Page 1 CONTENTS 1.0 INTRODUCTION .......................................................................................... 3 2.0 TECHNICAL SPECIFICATIONS .................................................................. 3 3.0 DISPLAY AND KEY DESCRIPTIONS ................

Page 5 - TECHNICAL SPECIFICATIONS

© Adam Equipment Company 2012 Page 3 1.0 INTRODUCTION • The MDW 300L scale is a Digital Health and Fitness Scale with Body Mass Index (BMI) readout. • It is an accurate electronic device with advanced design and stable performance. • It is designed to measure both the weight and the height of a pers...

Page 6 - DISPLAY AND KEY DESCRIPTIONS; ZERO

© Adam Equipment Company 2012 Page 4 3.0 DISPLAY AND KEY DESCRIPTIONS KEYS FUNCTIONS [On/Off / Zero] To turn the scale on or off. To zero the scale if the display drifts from zero. [Tare] ↵ ↵↵ ↵ To tare the scale, if necessary. Accept settings as required [Units / BMI] To toggle the weighing unit be...

Page 7 - SETTING UP THE SCALE; Take the scale out of the box.

© Adam Equipment Company 2012 Page 5 4.0 SETTING UP THE SCALE • Take the scale out of the box. 1. Locate the 4 screws (2) 2. Place the cable (4) through the pillar (3). 3. Insert the 4 screws (2) through the holes on the pillar bracket and secure the bracket to the indicator (1), 4. Make sure the sc...

Page 9 - FULL

© Adam Equipment Company 2012 Page 7 5.0 FUNCTION 5.1 WEIGHING • Place the Scale on an even floor and press the [On/Off] key. • The instrument performs a self-test after which it is ready for operation. • Press the [On/Off] key and the machine switches off. • The person to be weighed can step on to ...

Page 10 - MEASURING HEIGHT

© Adam Equipment Company 2012 Page 8 5.2 MEASURING HEIGHT • To measure some ones height, it is necessary to extract the measuring rod and place the height arm on top of the head of the person being measured. • For shorter heights the height arm can be released by pressing the red button on the top o...

Page 12 - USER PARAMETERS; Parameters setting summary:; Parameter

© Adam Equipment Company 2012 Page 10 7.0 USER PARAMETERS This indicator has 4 parameter settings that can be selected. 1. When the scale is in normal weighing mode, press and hold down the [ON / OFF] key and the [UNIT] key for 3 seconds until ‘Setup’ is shown on the display. 2. When in the SETUP mo...

Page 13 - The Interface parameters are:

© Adam Equipment Company 2012 Page 11 8.0 RS232 COMMUNICATIONS The Interface parameters are: Connection details are: 8.1 RS-232 connection between the Scale and the Host: DB9 female RXD pin 3 TXD pin 2 GND pin 5 Note: Pins 1,4,6,7,8 and 9 are not connected. The RS232 function will only operate if PH...

Page 15 - as pressing the TARE button:

© Adam Equipment Company 2012 Page 13 <p> Polarity character including minus sign for negative weight and a space character for positive weight W1-W7 weight data <dp> decimal point U1U2: measure units, kg, lb 8.5.3 Commands and response (1) Command: W<CR> (57h 0dh) Response: <LF...

Page 20 - For a complete listing of all Adam products visit our website at

© Adam Equipment Company 2012 ADAM EQUIPMENT is an ISO 9001:2008 certified global company with more than 35 years experience in the production and sale of electronic weighing equipment. Adam products are predominantly designed for the Laboratory, Educational, Health and Fitness, retail and Industria...