Adam Equipment CRW - Manuals

@Adam Equipment Company 2004 4 2.2 BATTERY OPERATION When battery goes low, the reading will keep on flickering. It is the time to charge the battery with the special charger. If the scale is being used without proper charging, the display will flicker and after 30 minutes the display will show “ ”....

@Adam Equipment Company 2004 5 2.5 AUTO SLEEP The crane scales have automatic sleep function. You can disable this function, see section 4.0. When the scale weighs a sample below the minimum capacity (20d) for more than the set time, it will automatically enter the sleep mode. Only the last point wi...

@Adam Equipment Company 2004 6 4.0 PARAMETER 4.1 Enter setting mode Turn off the power of the scale and then turn the power on again. Press the [ZERO] and [CHANGE] key at the same time during self- checking. Display shows “ ”, asking for the password. Input the password using the [LOCK] key to move ...

@Adam Equipment Company 2004 8 5.0 ERROR CODES ERROR CODES DESCRIPTION SUGGESTIONS $" Over range Remove the weight from the scale. If the problem persists contact your dealer or Adam Equipment for assistance. &'' Zero Setting Error The scale was outside the normal auto-zero setting range (4%...

@Adam Equipment Company 2004 ADAM EQUIPMENT is an ISO 9001:2000 certified global organisation with more than 30 years experience in the production and sale of electronic weighing equipments. Products are sold through a world wide distributor network -supported from our company locations in the UK, U...