Bostitch SW9040 5/8 SW9040 3/4 SW9040 7/8 - Manual
Bostitch SW9040 5/8 SW9040 3/4 SW9040 7/8 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE; AIR CONSUMPTION; After all air connections are made, check for leaks.; CHOICE OF STAPLE SIZE; ) Do not pull the trigger or depress the trip as accidental
- Page 3 – tool while the air supply is connected.; TO OPERATE; operating valves and mechanisms that could cause tool failure.
- Page 5 – Pusher Spring; ITEM; Valve Stem; VARIABLE PARTS; Driver; extra care when evaluating problem tools.
- Page 6 – possibly causing injury.
D16-2AD
BOXLOK STAPLER
STAPLE SIZES:
SW7437 7/16
SW7437 5/8
SW7437 3/4
SW9040 5/8
SW9040 3/4
SW9040 7/8
Stanley Fastening Systems
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO UNDERSTAND
AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE INSTRUCTIONS WITH
THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, CONTACT YOUR BOSTITCH
REPRESENTATIVE OR DISTRIBUTOR.
DO NOT USE SUPPLY SOURCES WHICH CAN POTENTIALLY EXCEED 80 PSIG (5.7 KG/CM2) AS TOOL
MAY BURST, POSSIBLY CAUSING INJURY.
WHEN AIR SUPPLY .IS CONNECTED KEEP HANDS AND BODY AWAY FROM STAPLE DISCHARGE AREA
AT ALL TIMES. DO NOT FIRE THE TOOL WITHOUT STAPLING INTO MATERIAL.
THE CONNECTOR ON THE TOOL MUST NOT HOLD PRESSURE WHEN AIR SUPPLY IS
DISCONNECTED. IF A WRONG FITTING IS USED, THE TOOL CAN REMAIN CHARGED WITH AIR
AFTER DISCONNECTING AND THUS WILL BE ABLE TO DRIVE A STAPLE EVEN AFTER THE AIR LINE
IS DISCONNECTED POSSIBLY CAUSING INJURY.
DO NOT PULL TRIGGER OR DEPRESS CONTACT ARM WHILE CONNECTED TO THE AIR SUPPLY AS
THE TOOL MAY CYCLE, POSSIBLY CAUSING INJURY.
DO NOT USE OXYGEN, COMBUSTIBLE GASES, OR BOTTLED GASES AS A POWER SOURCE FOR THIS
TOOL AS TOOL MAY EXPLODE, POSSIBLY CAUSING INJURY.
FAILURE TO OBSERVE ANY OF THESE WARNINGS MAY RESULT IN INJURY.
BSA981SREVE 9/03
OPERATION and MAINTENANCE MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
AIR SUPPLY AND CONNECTION Do not use oxygen, combustible gases, or bottled gases as a power source for this tool astool may explode, possibly causing injury. Do not use supply sources which can potentially exceed 80 P.S.I.G. (5.6 kg/cm 2 ) as tool may burst, possibly causing injury. The connector on...
TO PREVENT ACCIDENTAL INJURIES:• Never place a hand or any other part of the body in staple discharge area of tool while the air supply is connected. • Never point the tool at anyone else.• Never engage in horseplay.• Never pull the trigger unless nose is directed at the work.• Always handle the too...
ITEM PART NO. DESCRIPTION NO. 47. LW10 #10 Lock Washer 48. UP2912.3 3/32 x 3/4” Cotter Pin 49. D14164 Pusher Spring 50. UB2814.2 Pin, Spring .094 x .88 51. D60054 Spring, Valve ITEM PART NO. DESCRIPTION NO. 52. D60009 Valve Stem 53. 851201 O-Ring .301 x .070 54. D60008 Valve Body 55. 86458 O-Ring 1/...
