Bosch CISS - Installation Manual
Bosch CISS – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents
- Page 3 – General Information; CISS Demo Python Script; Definition of special notices; Always follow these instructions; Download and Installation; Install the Python Environment
- Page 4 – Download the Demo Python Script; Configuring the ini File
- Page 5 – Set the USB Port; The parameter
- Page 6 – Set the Device Name; Parameter
- Page 7 – Mode Selection; ONLY ONE of the four modes. All available modes are:; Raw Data Streaming Mode; each sensor for this mode.; Accelerometer 2KHz Streaming Mode
- Page 8 – Time Aggregation Mode; accelerometer, gyroscope and temperature; Sensor; Event Detection Mode
- Page 9 – Threshold; Running under the Windows
- Page 10 – Running under the Linux; CISS Log Files; TimeAggregation_LogFiles; Log File Name; explained below with some screenshots.; Raw Data Log Files; sampling rate (set by user) and the measurement unit is specified.
- Page 11 – It is the timestamp of the data reception (stamped in the script)
- Page 12 – Accelerometer 2kHz Mode Log Files
- Page 13 – Time Aggregation Mode Log Files; in CISS. This mode is only available for
- Page 14 – Event Detection Mode Log Files
- Page 15 – Release Notes
- Page 16 – Bosch Connected Devices and Solutions GmbH; Germany
Bosch Connected Devices and Solutions GmbH
CISS Demo Python Script / Operating Instructions v2.0
CISS - Connected Industrial
Sensor Solution
Demo Python Script – Operating Instructions
Version 2.0
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Bosch CISS
Summary
Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 Table of Contents 1 General Information ............................................................................................................ 3 1.1 Definition of special notices .....................
Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 1 General Information CISS is a multi-sensor IoT device with eight sensors. It is developed for industrial retrofit applications such as condition monitoring and predictive maintenance. This document is ...
Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 To install missing modules (e.g. “pySerial”) which are needed to run the example Demo Python Script, please • Start a “Command Shell” under Windows (cmd.exe) • Use the following command to install additi...
