Page 3 - Table of Contents; Safety
FLEXIDOME 5000 AN Table of Contents | en 3 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 Table of Contents 1 Safety 5 1.1 Safety precautions 5 1.2 Important safety instructions 6 1.3 Connection in outdoor applications 7 1.3.1 Safety precautions 7 1.4 Important notices 8 1.5 ...
Page 4 - Troubleshooting
4 en | Table of Contents FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 5.3 Day/Night switching 28 5.4 Camera control communication (Bilinx) 28 5.5 Main menu structure 29 5.5.1 Mode submenu 29 5.5.2 Exposure submenu 30 5.5.3 Day/Night submenu 32 5.5.4 Enhanc...
Page 5 - Safety precautions
FLEXIDOME 5000 AN Safety | en 5 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 1 Safety 1.1 Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result i...
Page 6 - Important safety instructions; Controls adjustment -
6 en | Safety FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before oper...
Page 7 - Connection in outdoor applications
FLEXIDOME 5000 AN Safety | en 7 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 1.3 Connection in outdoor applications 1.3.1 Safety precautions Coax grounding: If an outside cable system is connected to the unit, ensure that the system is grounded. U.S.A. models only: Section ...
Page 8 - Important notices
8 en | Safety FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 1.4 Important notices Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and e...
Page 9 - FCC information; FCC & ICES Information; residential
FLEXIDOME 5000 AN Safety | en 9 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 1.5 FCC information FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15...
Page 10 - UL certification; Disclaimer; Bosch notice; More information
10 en | Safety FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 1.6 UL certification Disclaimer Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested ...
Page 11 - Introduction; Features
FLEXIDOME 5000 AN Introduction | en 11 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 2 Introduction 2.1 Features The FLEXIDOME 5000 Day/Night WDR camera is a small, discreet, surveillance dome containing a high-performance camera with integral varifocal lens. It uses a wide ...
Page 12 - Installation; Unpacking
12 en | Installation FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 3 Installation 3.1 Unpacking Unpack carefully and handle the equipment with care. The packaging contains: – FLEXIDOME 5000 camera – Important safety instructions – Quick install instructions...
Page 13 - Disassembly
FLEXIDOME 5000 AN Installation | en 13 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 3.2 Disassembly The flush-mount version consists of the following parts: The surface-mount version consists of the following parts: Figure 3.1 Flush-mount Camera module and mounting base Inn...
Page 14 - Mounting the unit
14 en | Installation FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems To disassemble the unit proceed as follows: 1. Use the special screwdriver bit to loosen the three tamper- resistant screws in the trim ring (the screws remain in place). 2. Remove the trim ...
Page 15 - Mounting tips
FLEXIDOME 5000 AN Installation | en 15 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 If the unit is to be surface mounted, then use the Surface Mount Box (SMB). The SMB is sold as a separate item (VDA-455SMB) or is included with the unit with the surface mount option. Other ...
Page 16 - Surface mounting
16 en | Installation FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems Figure?3.4? Flush mounting - electrical box (4S) 3.3.3 Surface mounting When using the surface mounting box: – With a side connection, remove the cap covering the side entrance. With a rear ...
Page 19 - Connection and set-up; Power and video connections; Note
FLEXIDOME 5000 AN Connection and set-up | en 19 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 4 Connection and set-up 4.1 Power and video connections The wiring harness has a BNC connector to accept the video coax cable (with male BNC connector) and two stripped low voltage ...
Page 20 - Setting up the camera; Camera positioning; hot
20 en | Connection and set-up FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 4.2 Setting up the camera 4.2.1 Camera positioning To assist in setting up the camera, connect a monitor to the miniature 2.5 mm jack socket (2). This socket provides a composite vi...
Page 21 - TOP; Menu navigation
FLEXIDOME 5000 AN Connection and set-up | en 21 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 The physical default position of the camera is that the top of the image corresponds to the indication TOP . The camera module position can be adjusted along three axes. When adjust...
Page 22 - Install
22 en | Connection and set-up FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems – Press the menu/select (center) key to access the menus or to move to the next or previous menu. – Press the menu/select key for approximately 2 seconds to open the Install menu. –...
Page 23 - Focal length and focus; Heater; Auto
FLEXIDOME 5000 AN Connection and set-up | en 23 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 4.2.3 Focal length and focus Before adjusting the focal length or focus, place the lens adjustment cap on the lens to ensure that the image sharpness is the same as when the dome is...
Page 24 - Closing the unit
24 en | Connection and set-up FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 4.2.5 Closing the unit When the camera position is set and all adjustments have been made, close the unit. 1. Place the inner liner (with attached sealing ring) in position, alignin...
Page 25 - Configuration; Menus; Top level menus
FLEXIDOME 5000 AN Configuration | en 25 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 5 Configuration The camera normally provides an optimal picture without the need for further adjustments. Advanced set-up options are available in a menu system for getting the best results...
Page 26 - Exit
26 en | Configuration FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 5.1.2 Menu navigation Five keys are used for navigating through menu system. – Use the up or down keys to scroll through a menu. – Use the left or right keys to move through options or to s...
Page 27 - Traffic
FLEXIDOME 5000 AN Configuration | en 27 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 5.2 Pre-defined modes There are six pre-defined modes with settings to make configuration easier. You can select one of the six pre-defined modes in the Install/Mode submenu. The modes are ...
Page 29 - Main menu structure; Mode submenu
FLEXIDOME 5000 AN Configuration | en 29 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 5.5 Main menu structure 5.5.1 Mode submenu Item Selection Description Mode Submenu Sets up operating modes 1 to 6 Exposure Submenu Exposure control Day/Night Submenu Day/Night for color/mon...
Page 30 - Exposure submenu; Item
30 en | Configuration FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 5.5.2 Exposure submenu Item Selection Description ALC level -15 to +15 Selects the video level range. A positive value is more useful for low- light conditions; a negative value is more use...
Page 34 - Enhance / Dynamic Engine submenu
34 en | Configuration FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 5.5.4 Enhance / Dynamic Engine submenu Item Selection Description Dynamic Engine Off, XF DYNAMIC, HDR, Smart BLC Off: - turns off all automatic scene detail and enhancements (only recommend...
Page 36 - Color submenu
36 en | Configuration FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 5.5.5 Color submenu Item Selection Description White balance ATW indoor, ATW Outdoor, ATW hold, Manual ATW - Auto tracking white balance allows the camera to constantly adjust for optimal c...
Page 37 - VMD submenu
FLEXIDOME 5000 AN Configuration | en 37 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 5.5.6 VMD submenu Selecting an area for VMD masking To set-up an area for VMD masking, access the area menu by selecting the VMD Area option from the VMD menu. Upon entering the Area menu, ...
Page 38 - Image Adjustment submenu
38 en | Configuration FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 5.5.7 Image Adjustment submenu Item Selection Description Digital Zoom x1, x2, x4, x8, x16 Select the zoom factor DIS Off, On Select On to stabilize the image. EXIT Returns to main menu.
Page 39 - Install menu structure
FLEXIDOME 5000 AN Configuration | en 39 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 5.6 Install menu structure Item Selection Description Language Submenu Select on-screen display (OSD) language Lens Wizard Submenu Select to optimize the focus point. Synchroniza- tion Subm...
Page 40 - Language submenu
40 en | Configuration FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 5.6.1 Language submenu 5.6.2 Lens Wizard submenu Item Selection Description Language English Spanish French German Portuguese Russian Simplified Chinese Displays the menus on the OSD in the...
Page 41 - Synchronization submenu
FLEXIDOME 5000 AN Configuration | en 41 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 5.6.3 Synchronization submenu 5.6.4 Connections submenu Item Selection Description Synchroniza- tion Internal Line lock Internal - for free running camera operation. Line lock - to lock to ...
Page 42 - Test signal submenu
42 en | Configuration FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 5.6.5 Test signal submenu 5.6.6 Camera ID submenu Item Selection Description Show camera ID Off, On Select On to overlay the camera ID on the video test signal. Test pattern Color bars, Ras...
Page 44 - Privacy masking submenu
44 en | Configuration FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 5.6.7 Privacy masking submenu Selecting an area for privacy masking To set-up an area for privacy masking, access the area menu by selecting the Area option from the privacy masking menu. U...
Page 45 - Defaults submenu
FLEXIDOME 5000 AN Configuration | en 45 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 5.6.9 Defaults submenu Item Selection Description Restore All No, Yes Restores all settings of the six modes to their default (factory) values. Select YES then press the Menu/Select button ...
Page 46 - Resolving problems; Malfunction
46 en | Troubleshooting FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 6 Troubleshooting 6.1 Resolving problems The following table is intended to help you identify the causes of malfunctions and correct them when possible. Malfunction Possible causes Soluti...
Page 47 - Customer service
FLEXIDOME 5000 AN Troubleshooting | en 47 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 6.2 Customer service If you cannot resolve a fault, please contact your supplier or system integrator, or contact Bosch Security Systems Customer Service directly. The Installer should wr...
Page 48 - Maintenance; Repairs; Transfer and disposal
48 en | Maintenance FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems 7 Maintenance 7.1 Repairs 7.1.1 Transfer and disposal The camera should only be passed-on together with this installation guide. The unit contains environmentally hazardous materials that mus...
Page 49 - Technical Data; Specifications; All versions
FLEXIDOME 5000 AN Technical Data | en 49 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 8 Technical Data 8.1 Specifications All versions Type number VDN-5085-3 VDN-5085-9 VDN-5085-A Lens 2.8 to 10.5 mm F1.2 9 to 22 mm F1.4 18 to 55 mm F1.5 Sensitivity (30IRE) <0.06 lx <...
Page 51 - Dimensions
FLEXIDOME 5000 AN Technical Data | en 51 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 8.1.1 Dimensions Figure 8.1 Dimensions - Flush-mount 57.6 (2.27) 57.6 (2.27) 158 (6.22) 39.5 (1.56) 85 (3.35) 33.3 (1.31) 66.5 (2.62) 121 (4.77) 95 (3.7) mm (in)
Page 53 - Accessories
FLEXIDOME 5000 AN Technical Data | en 53 Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03 8.1.2 Accessories – BNC to UTP transceiver – Surface Mount Box (SMB) – Pendant wall mount – Pendant ceiling mount – Corner mount – Bilinx communication interface box and software Contact a...