Blomberg TKF 8439 A - Manual

6 EN 2 Important safety instructions This section includes safety information that will help protection from risks of personal injuries or materialistic damages. Failure to follow these instructions shall cause any warranty and reliability commitment to become void. General safety • Never place the ...

8 EN 3 Installation Refer to the nearest Authorised Service Agent for installation of your product. C Preparation of location and electrical installation for the product is under customer’s responsibility. B Installation and electrical connections must be carried out by a qualified personnel. A Prio...

10 EN Disposing of the old machine Dispose of your old machine in an environmentally friendly manner. Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your machine. Before disposing of your old machine, cut off the power cable plug and make the load...

11 EN Make sure that you have an earthed power outlet socket rated at 13 amps (minimum). Attention! If you use your dryer as built-in, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation. Check for suitability. F...

12 EN A B C l m n o p q D Low Laundry unsuitable for drying in the machine • Laundry items with metal attachments such as belt buckles and metal buttons can damage your dryer. • Do not dry items such as woollens, silk garments and nylon stockings, delicate embroidered fabrics, laundry with metal acc...

14 EN Following weights are given as examples. Home articles Approximate weights (g) Cotton quit covers (double) 1500 Cotton quit covers (single) 1000 Bed sheets (double) 500 Bed sheets (single) 350 Large tablecloths 700 Small tablecloths 250 Tea napkins 100 Bath towels 700 Hand towels 350 Garments ...

15 EN 6 Selecting a Programme and Operating Your Machine 1. Washing machine spin speed*/ Timer pro- gramme selection Spin speed used to spin the laundry in the washing macthine / Indicates the time for timer programs. 2. Display Indicates the status of the machine. 3. Start/Pause/Cancel button Used ...

16 EN Preparing the machine 1. Plug in your machine. 2. Place the laundry in the machine. 3. Press the “On/Off” button. C Pressing the “On/Off” button does not necessarily mean that the programme has started. Press “Start/Pause/ Cancel” button of the machine to start the programme. Programme selecti...

17 EN •Lingerie Suitable to dry the 100% synthetic or synthetic-mixture satin type underwear (night gown, garments for upper body, pajamas) with the word dryable in the washing instructions. C Products with a high accessory con- tent such as lace, veil, stone, beads and wires and products with a hig...

18 EN Programme selection and consumption table Programme table * : Energy Label standard programme (EN 61121:2012) All values given in the table have been fixed according to EN 61121:2012 Standard. These values may deviate from the table according to the laundry type, laundry spin speed, environmen...

19 EN Auxiliary function Audio Warning Cancel audio warning Audio warning level 1 Audio warning level 2 Audio warning level 3 Your dryer will give an audio warning when the programme comes to an end. If you do not want to hear this buzzing or want to change the volume level, you need to press the “V...

20 EN intervals to remind that the condenser needs cleaning. Door open Dryer door open symbol lights up. Time delay With the “Time delay” function you can delay the programme start up to 24 hours. 1. Open the loading door and put the laundry in. 2. Set the drying programme and spin speed, and if req...

21 EN end of the programme if anti-creasing function is active. Changing the programme after the programme has started You can use this feature to dry your laundry in a different program after your machine has started to run. For example; Press and hold the “Start/Pause/Cancel” button for about 3 se...

23 EN There are humidity sensors in your dryer that detect whether the laundry is dry or not. To clean the sensor: 1. Open the loading door of the dryer. 2. Allow the machine to cool down if drying has been carried out. 3. Wipe the metal sensors with a soft cloth, dampened with vinegar and dry them....

24 EN 2. If there is lint accumulation in the water tank cover, clean it and press to close. 3. Place the water tank into its seat. For the condenser Hot and humid air in the condenser is cooled with the cold air from the room. Thus, the humid air circulating in your dryer is condensed and then pump...

25 EN 8 Suggested solutions for problems Drying process takes too much time• Meshes of the filter may be clogged. Wash with water.Laundry comes out wet at the end of drying.• Meshes of the filter may be clogged. Wash with water. • Excessive laundry might have been loaded in. Do not load the dryer in...

26 EN 9 Guarantee Your new Blomberg product is guaranteed against the cost of breakdown repairs for 3 years from the date of the original purchase. What is covered? • Repairs necessary as a result of faulty materials, defective components or manufacturing defect. • The cost of functional replacement...

27 EN 1 0 Service Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it should the product require attention under guarantee. You should also complete the details below; it will help us assist you when requesting service. (The model number is printed ...

Blomberg, 36-38 Caxton Way, Watford, Hertfordshire, WD18 8UF Tel: 0845 6048340 Fax: 0845 6004922, email: [email protected] www.blomberguk.com