Blodgett KTG-E - Manual
Blodgett KTG-E – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT NOTES FOR INSTALLATION AND OPERATION; This manual should be retained for future reference.
- Page 4 – SERVICE CONNECTIONS; DIMENSIONS
- Page 5 – INSTALLATION INSTRUCTIONS; The kettle must be installed in accordance with:
- Page 6 – Ground appliance to terminal provided inside console housing.
- Page 7 – dial to the desired setting from 1 to 10.
- Page 8 – OPERATING INSTRUCTIONS
- Page 9 – Add water to kettle for cleaning purposes.; TILTING INSTRUCTIONS
- Page 10 – CLEANING INSTRUCTIONS; Add water and mild detergent to the kettle immediately after use.; CAUTION: Do not use cleaning agents that are corrosive.; Should pitting or corrosion occur this is not covered by warranty.
- Page 11 – Daily; provide a safe workplace.; Every Two Weeks; Perform a “try lever test” on the safety relief valve.; Every Six Months; Lubricate the bronze trunnion bearings.
- Page 12 – VENTING INSTRUCTIONS; With an empty kettle, place power switch to the ON position.
- Page 15 – FIRE FIGHTING MEASURES; PMCC; FLAMMABILITY LIMITS
- Page 17 – (See Section 15 for Regulatory Information); HANDLING AND STORAGE; PERSONAL PROTECTIVE EQUIPMENT
- Page 19 – ECOLOGICAL INFORMATION; (For detailed Ecological data, write or call the address; DISPOSAL CONSIDERATIONS; MATERIAL SAFETY DATA SHEET
- Page 20 – (Not meant to be all-inclusive – selected regulations
- Page 22 – CANADIAN REGULATIONS; This product is not a “Controlled Product” under WHMIS.; OTHER INFORMATION; MSDS STATUS: Revised to 16 section format.
1
KTG-E
ELECTRIC TABLE TOP KETTLE WITH MANUAL
GEARBOX TILT MECHANISM
INSTALLATION – OPERATION
–
MAINTENANCE
BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, Vermont 05401 USA Telephone (800) 331-5842, (802) 860-3700 Fax: (802) 864-0183
S00062 Rev A (5/04)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 IMPORTANT NOTES FOR INSTALLATION AND OPERATION It is recommended that this manual be read thoroughly and that all instructions be followedcarefully. This manual should be retained for future reference. This is the safety alert symbol. It is used to alert you to potentialpersonal injury hazards. Ob...
4 SERVICE CONNECTIONS A ID B C 14 1/2 [368] 20 7/8 [530] 4X WELD NUTSP5/16-18UNC 10 [254] 12 1/2 [318] 1 1/4 [32] G 2 1/8 [54] K H J F D 1 7/8 [48] SAFETY RELIEF VALVE E ELECTRICAL CONNECTION TO BE AS SPECIFIED ON DATA PLATE - CAPACITY 10 gallons 12 gallons MODEL KTG-10E KTG-12E 25 5/16 700 27 9/16 ...
5 1.0 INSTALLATION INSTRUCTIONS Immediately after unpacking, check for possible shipping damage. If the kettle is found tobe damaged, save the packaging materials and contact the carrier within 15 days ofdelivery. 1. The kettle must be installed in accordance with: 2. State and/or local codes. 3. In...
