Page 2 - Device overview
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 2 2 4 5 6 8 9 10 11 12 13 14 15 16 17 3 7 1 Device overview
Page 3 - T button – opens the; MENU button – to activate the setup menu.
3 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 1 button – opens the control panel. 2 Button to switch the unit on/off and operate the mutevolume function. 3 Volume control. 4 Macro button – programmable function button. For furtherinformation, rea...
Page 5 - Overview of navigation functions; CITY
5 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Overview of navigation functions Press the NAV key once in order toswitch from the radio or CD-changer(optional) audio sources to the navigationsystem’s main menu or back to naviga-tion (if a navigati...
Page 6 - CENTRE
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 6 Navigation begins. The visual driving recommendations ap-pear in the left of the display. In the centre you will see a display thatprovides a symbolic representation of thedistance to the next decision point (e.g. acrossing). On the...
Page 7 - Safety information; The TravelPilot has been designed for use in passenger cars.
7 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Safety information The TravelPilot has been designed for use in passenger cars. Special information such as height restrictions or maximum permitted road load, which is required for navigatingtrucks a...
Page 9 - About these instructions
9 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH About these instructions The aim of these instructions is to familiarize you with the functions of the Travel-Pilot DX-R 70 and ensure that you can safely and successfully operate the unit.Before star...
Page 10 - Theft protection KeyCard; Inserting a KeyCard
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 10 Theft protection KeyCard The unit is supplied with a KeyCard. The TravelPilot can also be operated using a second KeyCard. Furthermore, the values that were set last for the frequency range, station tuner,traffic information announ...
Page 11 - Removing the KeyCard
11 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Removing the KeyCard To unlock the control panel, 1 Press the button 1 . ✔ The control panel opens. 2 Push the KeyCard and the KeyCard slide towards the right until they gono further. 3 Remove the Ke...
Page 12 - Switching the unit on/off; Switching on/off using the KeyCard
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 12 Switching the unit on/off 1 To switch on the TravelPilot when the KeyCard is inserted, press theblue button 2 in the centre of the volume control 3 . ✔ The unit plays the audio source that was active last at the preset volumelevel....
Page 13 - Selecting the operating mode; Switching between the main menu and functions menu; JUMP
13 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Selecting the operating mode To select the operating mode, press: 1 the TUNE button A for radio mode or 1 the CD.C button @ for CD or CD-changer (optional) mode or 1 the NAV button ? to activate navi...
Page 14 - Opening the setup menu; Adjusting the volume; Automatic volume mute during telephone calls; FM; RADIO 1
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 14 Switching between the navigation system’s main menu and navigationmenu If you want to switch between the main menu and the navigation menu during anactive navigation, 1 press the NAV button ? . If navigation is not active, position...
Page 15 - Display
15 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Display The TravelPilot’s display contains all the navigation information (e.g. visual driv-ing recommendations), menus and lists, as well as the menus relating to theradio, CD and CD changer (option...
Page 16 - Adjusting audio settings and sound distribution settings; BASS
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 16 Adjusting audio settings and sound distribution settings The TravelPilot allows you to adjust the bass and treble for each audio source. Changes to the balance and fader sound distribution settings and loudness set-tings (aurally c...
Page 17 - Navigation; How navigation works
17 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Navigation The navigation system in the TravelPilot DX-R 70 helps you find your way todestinations quickly and safely without first having to spend time studying aroadmap. When navigation is active, ...
Page 18 - Destinations; NAVIGATION
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 18 ✔ The software is loaded from the CD. The progress is indicated in thedisplay. Note: The process of loading the software from the navigation CDmust not be interrupted. Starting navigation 1 Press the NAV button ? whilst the unit is...
Page 19 - Entering destinations using the speller; Selecting letters; CITY⁄PLACE
19 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH • Previously saved special destinations such as train stations, airports, petrolstations and other public facilities. You can view a sorted list of specialdestinations for the destination town, the a...
Page 20 - Switching to special character sets
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 20 2 When the required character is highlighted, press the OK button 8 . ✔ The character will be entered into the input line. An appropriate entryfrom the list will be displayed in the match line as you enter more andmore characters. ...
Page 21 - Deleting letters; ROUTE LIST
21 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Deleting letters To delete a letter that you entered accidentally, 1 press the ESC button < or 1 highlight the symbol and press the OK button 8 . ✔ The input cursor will move to the left in the in...
Page 22 - Selecting list entries
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 22 2 Press the OK button 8 . ✔ The previous or next list page is displayed. The selection bar remains onthe arrow button. 3 Keep pressing the OK button 8 until you reach the required page. Selecting list entries 1 Press the OK button ...
Page 23 - Entering a destination – town
23 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Entering a destination – town If you want to drive to a destination in a town, you first have to specify one. 1 Select the DEST. ENTRY item in the main navigation menu. ✔ The destination input menu o...
Page 24 - Entering a destination – street, junction and house number
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 24 6 Press the OK button 8 to accept the town as your destination. If there are multiple instances of the town’s name, a submenu will open. Youcan then select the required town from it. If you do not want to accept the town as your de...
Page 25 - Entering a destination – house number; INTERSECTION
25 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 1 Enter the street name using the speller. 2 Select the required street name from the list. ✔ If the street name occurs several times in the destination town, a sub-menu will open in which you can sp...
Page 26 - Entering a destination – centre
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 26 You can specify route options in order to customise the route to suit your partic-ular requirements, e.g. excluding motorways. For further information, read thesection entitled “Route options” in this chapter. Entering a destinatio...
Page 28 - Special destinations – at your final destination
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 28 - POS. SURROUND : This includes special destinations within the vicinity of the current vehicle position (this function is particularly useful when look-ing for facilities such as petrol stations). Special destinations – at your fi...
Page 29 - Special destinations – national destinations
29 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Special destinations – national destinations You can also select items such as motorway junctions, service stations, airportsor border crossings as your destination. You do not need to previously ent...
Page 31 - Entering a destination – from the destination memory; POSITION MARK
31 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 5 Select the required destination. ✔ Navigation begins. For further information, read the section entitled “Nav-igation”. Entering a destination – from the destination memory You can save destination...
Page 32 - Entering a destination – position marker; Selecting a position marker as a destination
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 32 ✔ A list of the available destinations will open. 4 Select the required destination. ✔ Navigation begins. For further information, read the section entitled “Nav-igation”. Entering a destination – position marker You can set one of...
Page 33 - Starting navigation
33 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Navigation Starting navigation Once you enter a destination, navigation begins automatically. If you want to begin a navigation session to the navigation system’s last destina-tion, 1 select the ROUT...
Page 34 - SCHLOSSWEND...
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 34 In the right of the display you can optionally display either the approxi-mate remaining journey time to the destination, the approximate arrivaltime or the current time. For further information, read the section entitled“Selecting...
Page 35 - Changing the audio source
35 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Changing the audio source You can change the audio source at any time during navigation. 1 Press the TUNE A or CD.C @ button during an active navigation ses- sion. ✔ The main menu for radio mode or C...
Page 36 - Dynamic navigation; ROUTE OPTION
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 36 Dynamic navigation During dynamic navigation, the TravelPilot DX-R 70 analyses digital traffic infor-mation messages and uses this information when planning the route. The trafficmessages are received from TMC (Traffic Message Chan...
Page 37 - Tour list; Entering a tour destination; TOUR LIST
37 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Tour list The tour list allows you to combine individual destinations in a “tour”. TIP: The tour list is a convenient way of planning such things as inspec-tion tours or visits to various customers. ...
Page 38 - Using the navigation system’s last destination
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 38 You can now move the destination to the required position in the tour memory: 1 Press the OK button 8 . ✔ A reposition marker appears in front of the destination. 2 Use the / buttons on the rocker switch 7 to move the destination t...
Page 39 - Sorting the tour; Deleting a tour destination
39 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Sorting the tour To sort the tour, 1 select the SORT DEST. item in the TOUR LIST menu. 2 Press the OK button 8 . ✔ The tour list is displayed. 3 Select the destination that you want to reposition. 4 ...
Page 40 - Deleting the whole tour; Starting a navigation session to a tour destination
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 40 Deleting the whole tour To delete a whole tour, 1 select the CANCEL DEST. item in the TOUR LIST menu. 2 Press the OK button 8 . ✔ A selection menu is displayed. 3 Select ALL DESTS. . ✔ A confirmation request is displayed. 4 Select ...
Page 41 - NO MAP navigation; Travel guide
41 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH NO MAP navigation NO MAP navigation begins if you remove the navigation CD after having en-tered the destination and started the navigation session. TIP: During a NO MAP navigation session you can us...
Page 42 - Displaying the route list
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 42 - Entertainment - Historical buildings The information available can include addresses, telephone numbers, pricesand facilities provided by hotels and restaurants. Since the stored information depends on the travel guide on your CD...
Page 43 - Position tracking mode; from the main navigation menu during; Destination memory
43 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Once you have read the list, 3 close the menu by pressing the NAV button ? . ✔ The navigation menu reappears. Position tracking mode In position tracking mode, the name of the road you are currently ...
Page 44 - Saving a destination in memory; Entering and editing short names
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 44 Saving a destination in memory You can save the currently active destination or – after the navigation sessionhas ended – the last active destination of the navigation session in the destina-tion memory. Alternatively, you can use ...
Page 45 - Sorting destinations manually; Deleting destinations from the destination memory
45 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 6 select the symbol and press the OK button 8 or 6 keep the OK button 8 pressed for longer than two seconds. Sorting destinations manually You can also sort destinations manually in the destination m...
Page 46 - GPS status
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 46 ✔ A menu containing the following options appears: - SINGLE DEST. : You can select and delete individual destinations from the list of saved destinations. - ALL DESTS. : All destinations in the destination memory are deleted. ✔ A c...
Page 47 - Bypassing a traffic jam during navigation; OK
47 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Bypassing a traffic jam during navigation Alongside the feature for automatically bypassing traffic jams with the aid of thedynamic navigation feature, the TravelPilot also gives you the option of ma...
Page 48 - Cancelling the traffic jam bypass feature; Excluding a route section from the route list; Excluding a route
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 48 Cancelling the traffic jam bypass feature 1 Open the traffic jam bypass menu. 2 Select CLEAR and 3 press the OK button 8 . ✔ The navigation menu opens again and the route list is recalculated. Excluding a route section from the rou...
Page 49 - Cancelling / changing exclusions; - 6 listed in the “Excluding a route” section.
49 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 3 Use the / buttons on the rocker switch 7 to move the selection marker to the first road that you want excluded from your route. If neces-sary, open longer sections as already described. 4 Press the...
Page 50 - Defining route options
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 50 Defining route options You can customise the route to suit your requirements at any time, even duringan active navigation session. The configurable parameters are: - ROUTE : Choose between the quickest or shortest route or dynamic ...
Page 51 - Setting a position marker; TA
51 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH If you want to close the selection menu, 1 press the ESC button < (you will return to the navi menu) or 1 select the CONTINUE menu item and 2 press the OK button 8 . ✔ If navigation is not active,...
Page 52 - Saving a position marker; NEW NAME
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 52 Saving a position marker After you press the OK button 8 , a selection menu opens. You are now given the option of assigning a name to the position marker or returning to the menu inwhich you set the position marker. If you select ...
Page 53 - Traffic announcements during navigation; TA ON
53 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Traffic announcements during navigation You can switch traffic announcement standby during navigation on/off. 1 Press the MENU button : . ✔ The navi menu is displayed. 2 Select the TA menu item and 3...
Page 54 - Activating / deactivating the last 10 destinations memory; Selecting time information; TIME INFO
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 54 Activating / deactivating the last 10 destinations memory If the LAST 10 option is activated, the last 10 navigation destinations are storedautomatically in memory. You can also deactivate the LAST 10 memory. 1 Press the MENU butto...
Page 55 - Manually setting your position
55 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Manually setting your position If GPS reception is not available, you can manually set your position yourself. 1 Press the MENU button : . ✔ The navi menu is displayed. 2 Highlight the MAN. POSITION ...
Page 56 - Simulating navigation
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 56 Simulating navigation The TravelPilot provides you with the option of simulating a navigation session.During the simulation, the system provides visual driving recommendations andvoice output in real-time. If you want to start a na...
Page 57 - Radio mode; Switching to radio mode; Press the TUNE button; Selecting the frequency range or memory; press the TUNE button; FMT
57 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Radio mode Switching to radio mode 1 Press the TUNE button A . ✔ The main menu opens in radio mode. The station that was received lastwill be heard. The six softkeys on both sides of the display are ...
Page 58 - REG
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 58 1 Switch to radio mode. 2 Press the MENU button : . ✔ The radio mode’s setup menu appears. You will find the RDS item in the lower left display line. You can choose between the VAR , FIX and OFF options. The default setting is VAR ...
Page 59 - PTY alarm
59 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 1 Press the MENU button : . ✔ The setup menu is displayed. 2 Keep pressing the softkey that is assigned to REG until the required opti- on appears alongside REG . The default setting is OFF . Switchi...
Page 60 - Activating / deactivating the TA function for radio mode
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 60 TA (Traffic Announcement) Traffic announcements (TA) are a service provided by the broadcasting stati-ons. Traffic information announcements are broadcast regularly. Stations thatbroadcast traffic announcements also transmit a sign...
Page 61 - Interrupting a traffic announcement
61 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 1 Switch to the setup menu by pressing the MENU button : and 2 keep pressing the softkey assigned to TA until the required ON or OFF option appears. The default setting is ON . TIP: You can also swit...
Page 62 - Tuning into FM stations; Automatic seek tuning; Browsing through broadcasting networks (only for RDS stations)
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 62 Tuning into FM stations The TravelPilot provides several options for tuning into radio stations. Automatic seek tuning To tune into stations automatically, 1 press the button on the rocker switch 7 to seek tune upwards or 1 press t...
Page 63 - Tuning into MW stations; Scan seek tuning
63 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH This will only work if the RDS function is switched off in the setup menu. 1 Press the or button on the rocker switch 7 . ✔ The frequency changes in 100 kHz steps. Tuning into MW stations You can aut...
Page 64 - Starting scan seek tuning; Note: Only a TMC Scan can be carried out on the FMC level.; TMC Scan; Starting TMC Scan; SCAN
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 64 Starting scan seek tuning To start scan seek tuning, 1 switch to the radio functions menu by pressing the TUNE button A and 2 press the softkey assigned to the PAGE 2 menu item. 3 Press the softkey assigned to the SCAN menu item. ✔...
Page 65 - Stopping TMC Scan; Storing stations; Storing stations manually; switch to the radio functions menu by pressing the TUNE button
65 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Stopping TMC Scan If you want to stop scan seek tuning or continue listening to a station set by thescan seek tuning operation, 1 press the ESC button < . ✔ Scan seek tuning is stopped and the sta...
Page 66 - Storing stations automatically – “Travelstore”; Starting Travelstore; Storing TMC stations automatically – “TMC Store”; TMCSTORE
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 66 Storing stations automatically – “Travelstore” The unit can automatically store the six stations with the strongest reception inthe region in the FMT memory. This feature is particularly useful on excursions.Please note that any st...
Page 67 - Starting TMC Store; Reducing reception interference in FM mode; Activating / deactivating SHARX
67 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Starting TMC Store If you want to start TMC Store, 1 switch to the radio functions menu by pressing the TUNE button A and 2 press the softkey assigned to the PAGE 2 menu item. 3 Press the softkey ass...
Page 68 - Displaying radiotext; Activating / deactivating radiotext
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 68 Displaying radiotext Radiotext is a service provided by some RDS stations. Alongside the stationname, some stations also broadcast additional information on the radio pro-gramme or the title of the track currently being played. Thi...
Page 69 - TIM - Traffic Information Memory; Recording traffic information; TIM
69 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH TIM - Traffic Information Memory The unit contains a digital speech memory which can automatically record up to14 traffic messages with a maximum duration of four minutes. Depending on the length of ...
Page 70 - Switching TIM on / off, changing the recording standby time; Note: You can also switch TIM off by keeping the T button; Listening to stored traffic messages
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 70 Switching TIM on / off, changing the recording standby time When the car radio is switched on, you can turn the TIM function on / off asfollows. 1 Press the T button 9 . ✔ The traffic menu appears in the display. 2 Keep pressing th...
Page 72 - Viewing TMC messages; Press the T button; When you have finished reading the messages, press the T button; ESC button
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 72 Viewing TMC messages The TravelPilot provides you with the option of viewing the traffic messagesreceived via TMC (Traffic Message Channel) in the display. These messagesare used by the navigation system for dynamic navigation (for...
Page 73 - CD mode; Playing a CD; Inserting a CD
73 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH CD mode You can play audio CDs in the TravelPilot’s internal CD drive. When you areplaying audio CDs, only NO MAP navigation is possible. Only use audio CDs that bear this logo: During CD playback, t...
Page 74 - Switching the playing time display on/off; CD
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 74 Starting internal CD playback (no CD changer is connected) If an audio CD is inserted and no CD changer is connected, 1 press the CD.C button @ . ✔ The unit switches to the main CD menu and CD playback begins. If noaudio CD is inse...
Page 75 - Traffic announcements during CD mode; TIME
75 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 2 press the softkey assigned to the TIME menu item. ✔ The playing time display will be switched on / off. The default setting is ON . Traffic announcements during CD mode To switch traffic announceme...
Page 76 - Fast searching; MIX
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 76 Fast searching If you are listening to a track and you want to play a certain part of it, you can doso with fast search mode. 1 Press the or button on the rocker switch 7 during playback. ✔ You can hear the track fast forwarding / ...
Page 77 - Naming CDs; REPEAT
77 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Repeating tracks (REPEAT) To repeat a track, activate the repeat function. Proceed as follows: 1 Select the required track, 2 switch to the functions menu in CD mode by pressing the CD.C button @ and...
Page 79 - Deleting all names; Programming playlists; Defining a playlist; PROGRAM
79 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Deleting all names If you want to delete all the CD names from memory, proceed as follows: 1 Open the CD name menu and 2 press the softkey assigned to the CLR ALL menu item. ✔ A confirmation request ...
Page 81 - Deleting individual playlists; Deleting all playlists in memory
81 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Deleting individual playlists To delete a playlist if, for instance, you want to programme a new one, 1 run the playlist that you want to delete and 2 press the softkey assigned to CLR PRG . Deleting...
Page 82 - CD changer mode; Inserting CDs in the CD changer; Switching to CD changer mode; COCKER
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 82 CD changer mode You can use the following Blaupunkt CD changers with the Travel-PilotDX-R 70: - CDC - A08 - IDC - A09 Please refer to the installation and connection instructions supplied with yourCD changer for information on how ...
Page 84 - Replaying tracks
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 84 Selecting a CD To select a CD, 1 press the softkey assigned to the CD. If the required CD is not shown in the functions area of the display, open thesecond page of the main menu. 1 Press the softkey assigned to the CD6-CD10 or CD1-...
Page 85 - Configuring random play MIX for a CD or all the CDs in the magazine
85 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Random play (MIX) You can play the tracks on a CD or all the CDs in the changer in random order. 1 Switch to the functions menu by pressing the CD.C button @ and 2 press the softkey assigned to the M...
Page 87 - Activating the repeat function for CDs
87 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 1 Switch to the setup menu by pressing the MENU button : and 2 press the softkey assigned to RPT until TRK appears alongside it. Activating the repeat function for CDs To repeat a CD, you first have ...
Page 88 - ADD
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 88 6 Select the next track in the playlist by pressing the / button on therocker switch 7 and 7 press the softkey assigned to the ADD menu item. Repeat these steps with all the tracks that you want to include in your playlist. Astar i...
Page 89 - Entering a name
89 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Deleting all playlists in memory If you want to delete all the playlists in memory, 1 press the softkey assigned to CLR ALL . ✔ A confirmation request appears. If you are sure you want to delete all ...
Page 90 - CD NAME; EDIT
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 90 ✔ The currently highlighted letter is displayed in an enlarged fashion withinthe magnifier on the right of the display. 6 Press the OK button 8 . ✔ The letter is entered into the name line at the top. 7 Continue in this manner with...
Page 92 - switch to the setup menu by pressing the MENU button
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 92 Activating / deactivating traffic announcements(CD changer) To switch traffic announcement standby (see “TA (Traffic Announcement)” inthe “Radio mode” chapter) on / off during CD changer mode, 1 switch to the setup menu by pressing...
Page 93 - Steering wheel remote control; Selecting an audio source; Briefly press the SRC button on the remote control.; Activating navigation; Entering a destination using the steering wheel remote control
93 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Steering wheel remote control The RC 10 steering wheel remote control allows you to safely and convenientlyaccess some of the TravelPilot’s primary functions from your steering wheel.The / , / and OK...
Page 94 - Muting; Cancelling mute
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 94 Muting You can mute the unit using the remote control. 1 Press the button. Cancelling mute If you want to cancel mute, 1 press the button again or 1 press the V+ or V- button. REMOTE CONTROL
Page 95 - Setup – basic settings; Activating the setup menu; DISPLAY
95 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Setup – basic settings Setup mode allows you to adjust the TravelPilot’s basic functions to suit yourneeds. You can change the following device functions: • DISPLAY - Change the display characteristi...
Page 96 - Automatic changeover to night display; Adjusting the viewing angle
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 96 Setting the day / night changeover, viewing angle and dis-play brightness You can deactivate the automatic changeover to night-time display and adjustthe display brightness for the night and day displays in the display setup. Youca...
Page 97 - Adjusting the display brightness; Adjusting the fading effect for menus; SPECIAL EFF 0
97 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Adjusting the display brightness You can adjust the display brightness separately for the day and night display. Ifyou want to adjust the display brightness, 1 use the / buttons on the rocker switch ...
Page 98 - Programming the macro button; MACRO BUTTON
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 98 The power-on volume is a limiting value. This means that if the volume whenyou switch the unit on is lower than the configured power-on volume, the volumelevel that was last set will be applied. If the volume when you switch the un...
Page 100 - Setting the clock; Switching the status clock on/off; SETTINGS
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 100 Setting the clock In the CLOCK setup menu, you can activate / deactivate summer time, set the time format (12/24 hour), and set the time zone in relation to the standard time(GMT). These settings are necessary so that the TravelPi...
Page 101 - Setting the time zone
101 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Setting the time zone 1 Select the CLOCK menu item in the setup menu. 2 Select SETTINGS . 3 Select the TIME ZONE menu item. 4 Set the time deviation using the / buttons. The deviation from GMT for G...
Page 102 - Selecting the language
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 102 7 Adjust the minutes using the / buttons 7 . 8 Press the OK button 8 . Selecting the language You can set the language for the displays and navigation. There are variouslanguages available depending on the navigation CD. Metric se...
Page 103 - Calibrating the device; Calibrating after installation (new installation); Cancelling calibration; SYSTEM TEST
103 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Calibrating the device The INSTALLATION setup menu contains all the necessary items for preparing the TravelPilot for operation once it has been installed. Calibrating after installation (new instal...
Page 104 - DISTANCE
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 104 Note: No navigation is possible during the first 25% of the calibrati-on procedure after NEW INSTALL is selected. The route that you have to drive along depends on various factorssuch as the quality of GPS reception and the route ...
Page 105 - Carrying out the system test; Activating / deactivating the code LED; SENS
105 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH ✔ You will be asked to drive the route. 7 Use the / buttons on the rocker switch 7 to select START . 8 Carry out the steps as instructed by the system. Carrying out the system test You have the opti...
Page 106 - Resetting to the factory defaults
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 106 Resetting to the factory defaults You can reset the TravelPilot to its default settings. This affects all the settingsfor the navigation system and the audio sources. 1 Select DEFAULT SET. from the setup menu. Step 1: If a navigat...
Page 107 - Setting seek tuning sensitivity
107 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Setting seek tuning sensitivity You have the option of setting the seek tuning stop sensitivity for automatic seektuning mode. The default setting is BEST . 1 Use the / buttons on the rocker switch ...
Page 108 - Preparing a second KeyCard; Preparing a new KeyCard (“Learning”) / Entering the master code
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 108 Preparing a second KeyCard A second KeyCard can be prepared as an additional KeyCard if the TravelPilotis being operated with the first KeyCard inserted. If you want to prepare a second KeyCard, 1 insert the first KeyCard and swit...
Page 109 - Factory default settings; Setting; CODE
109 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH ✔ The master code input menu opens. Enter the four-digit master code that is printed on the equipment pass as fol-lows: 4 use the / buttons on the rocker switch 7 to highlight the first digit of the...
Page 110 - Macro button
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 110 VolumePower-on 20 TA-Min 21 Nav-Min 3 GALA 3 Tel-Vol 16 Macro button TA function ClockTime format 24 h Time zone + 1,0 Summer time On Status clock Off Main clock Off Code-LED On RadioRDS-REG Off PTY On RDS Var TA On SHARX On Radio...
Page 112 - Index
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 112 Index A Alternative frequency ........................... 58 B Balance ................................................. 16Basic settings ....................................... 95Bass ................................................
Page 114 - Blaupunkt GmbH
Country: Phone: Fax: WWW: Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.com Austria (A) 01-610 390 01-610 393 91 Belgium (B) 02-525 5454 02-525 5263 Denmark (DK) 44 898 360 44-898 644 Finland (FIN) 09-435 991 09-435 99236 France (F) 01-4010 7007 01-4010 7320 Great Britain (GB) 01-89583...