Page 4 - Switching on/off using button
56 Contents Notes and accessories ...................... 58 Disposal of old unit (EU countries only) ........................ 58Road safety ................................... 58Safety note ................................... 58Installation .................................... 58Optional equipment (...
Page 6 - Notes and accessories; Disposal of old unit; Road safety has absolute priority.; Safety note; The car sound system and the; Installation; Remote control
58 Notes and accessories Notes and accessories Please read these operating instructions before using the equipment for the fi rst time. We provide a manufacturer's warranty for our products purchased within the Europe-an Union. The warranty terms can be called up under www.blaupunkt.de or requested d...
Page 7 - Press and hold down the; MENU; button; Theft protection; Detachable control panel; Never drop the control panel.; Detaching the control panel
59 EN GLISH Notes and accessories Theft protection Activating/deactivating demo mode The device is supplied from the factory with demo mode activated. The various func-tions of the device are displayed graphi-cally as animations in the display during demo mode. You can also deactivate demo mode. Pre...
Page 9 - Setting the power-on volume; Mute; Cancelling mute; Telephone audio
61 EN GLISH Volume You can adjust the volume in steps from 0 (off) to 50 (maximum). To increase the volume, turn the volume control 2 clockwise. To decrease the volume, turn the volume control 2 counter- clockwise. Setting the power-on volume You can set the default volume level at which the device ...
Page 10 - Navigation audio
62 If the sound system receives a traffi c an-nouncement during a telephone call, you will only be able to hear the traffi c an-nouncement after the call is fi nished (in so far as the traffi c announcement is still being broadcast). If the sound system receives a call during a traffi c announcement, the...
Page 11 - Adjusting the bass
63 EN GLISH Adjusting the navigation minimum volume You can set the volume level at which the navigation announcements are mixed in. Note: Adjust the volume at the navigation sys-tem to the maximum value. If interfer-ences occur during playback, slightly reduce the volume at the navigation system. P...
Page 13 - Adjusting the viewing angle
65 EN GLISH Display You can adjust the display to suit the instal-lation position in your vehicle and to suit your needs. Adjusting the viewing angle Press the MENU button 9 . Press the softkey 5 with the display label "DISPLAY". Press the softkey 5 with the display label "ANGLE". Mo...
Page 15 - Adjusting the spectrum analyser
67 EN GLISH Adjusting the spectrum analyser The spectrum analyser on your display shows the output level of the car sound sys-tem. If the spectrum analyser is switched on, it is automatically displayed if you do not press a key for a while during the play-back of an audio source. You can also deacti...
Page 16 - Setting the number of antennas; Adjusting the tuner
68 Setting the number of antennas This device is equipped with two RDS radio receivers (TwinCeiver). You can connect one or two antennas to the device. If two antennas are used (strongly recommend-ed, the second antenna is part of the scope of delivery) a directional receiption of the station being ...
Page 17 - Switching to radio mode; TUNER
69 EN GLISH Switching to radio mode If the device is in the operating modes CD/MP3 or CD changer/Compact Drive, press the TUNER button = . The basic radio menu for selecting the sta-tion is displayed. The functions of the radio mode are controlled via the radio function menu. You reach the radio fun...
Page 20 - Tuning into a station
72 Tuning into a station There are various ways of tuning into a sta-tion. Automatic station seek tuning Move the joystick 8 up or down. The radio tunes into the next receivable sta-tion. Tuning into stations manually You can also tune into stations manually. Note: You can only tune into stations ma...
Page 21 - Setting the scanning time
73 EN GLISH Scanning receivable stations (SCAN) You can use the scan function to play all the receivable stations briefl y. You can set the scanning time in the menu to between 5 and 30 seconds. Starting SCAN Press and hold down the OK joystick 8 for longer than two seconds. Scanning begins. "SCA...
Page 22 - Listening to stored stations; Activating PTY
74 Radio mode Listening to stored stations Select the memory bank or waveband. Press the softkey 5 with the display label of the station name or the fre-quency of the desired station. Programme type (PTY) Besides transmitting the station name, some FM stations also provide informa-tion on the type o...
Page 23 - Optimising radio reception
75 EN GLISH Radio mode Selecting a programme type and starting seek tuning The PTY menu has several pages on which the known programme types are displayed. To scroll through the individual pages of the PTY menu, press the NEXT button 4 until the de- sired programme type is displayed next to one of t...
Page 28 - Starting CD mode, inserting a CD; If there is no CD inserted in the device,; Ejecting a CD
80 CD mode You can use this device to play standard au-dio CDs with a diameter of 12 cm. CD-Rs and CD-RWs ("self-burned" CDs) can usually be played. Due to the varying qual-ity of CD blanks, however, Blaupunkt can-not guarantee a faultless function. To ensure proper functioning, use only CDs...
Page 29 - Cancelling MIX; Displaying CD text; Switching CD text on/off
81 EN GLISH Fast searching (audible) To fast search backwards or forwards, hold the joystick 8 pressed in one direction (up and right for forwards or down and left for backwards) until fast searching starts. Random track play (MIX) Press the softkey 5 with the display label "MIX". "MIX C...
Page 30 - Adjusting the scrolling text; Switching CD scrolling text on/off; Press the softkey; MP3 mode; Preparing an MP3 CD
82 Adjusting the scrolling text You can allow the CD text to be displayed as scrolling text in the bottom line of the dis-play. Switching CD scrolling text on/off Press the softkey 5 with the dis- play label "SCROLL" repeatedly until "SCROLL ON" (scrolling text is switched on) or ...
Page 31 - Directories
83 EN GLISH D01 D02 T001 T005 T004 T003 T002 D03 T001 T006 T005 T004 T003 T002 T011 T007T008T009T010 D04 T001 T006 T005 T004 T003 T002 A B A Directories B Tracks · Files You can name each directory using a PC. The device is capable of displaying the di-rectory name. Name the directories and tracks u...
Page 32 - Selecting from directory list
84 In order to optimise the device’s ac-cess to the data on the MMCs/SDs, you should store no more than 20 directories and a maximum of 200 fi les on an MMC/SD. Inserting an MMC/SD Detach the control panel. Insert the MMC/SD with its labelled side uppermost and its contacts fi rst into the SD/MMC slot...
Page 33 - Selecting tracks
85 EN GLISH Press the NEXT button 4 to redisplay the MP3 main menu. Selecting a directory with the joystick To move up or down to another directory, Press the joystick 8 repeatedly up or down until the number of the desired directory appears in the fi rst position in the top line of the display. Note...
Page 34 - Confi guring the display
86 Scanning tracks (SCAN) You can scan all the tracks on the CD/SD/MMC. Press and hold down the OK joystick 8 for longer than two seconds. The next titles of the CD/SD/MMC are scanned in ascending order. Note: You can set the scanning time. For further information, please read the section entitled &...
Page 35 - Selecting information in the info line
87 EN GLISH Note: If the track name from the ID3 tag is not available, the fi le name is displayed For the bottom line of the display (info line), you can select from the display of different information. Selecting information in the info line In the bottom line of the display (info line), you can se...
Page 36 - OK; Switching to CD-changer mode; SOURCE; Selecting CDs; or
88 Selecting tracks To move down or up to another track on the current CD, press the joystick 8 repeatedly left or right until the number of the desired track appears on the display. Pressing the joystick 8 once left restarts the current track. Fast searching (audible) To fast search forwards or bac...
Page 37 - Naming CDs
89 EN GLISH Repeating individual tracks or whole CDs (REPEAT) To repeat the current track, press the NEXT button 4 . The display shows the CD changer function menu. Press the softkey 5 with the display label "REPEAT". "REPEAT TRACK" briefl y appears on the display. To repeat the entir...
Page 39 - Setting the time
91 EN GLISH Clock – time Setting the time The time can be set automatically via the RDS signal. If no station supporting this function can be received, you can also set the time manually. Setting the time automatically To set the time automatically, press the MENU button 9 . Press the softkey 5 with...
Page 40 - Permanent time display
92 Permanent time display You can show the time of the device on the display with switched-off device and switched on vehicle ignition. Press the MENU button 9 . Press the softkey 5 with the display label "CLOCK". Press the softkey 5 with the display label "OFFCLOCK". "SHOW CLOCK...
Page 41 - Switching DSA on
93 EN GLISH Switching DSA on To reactivate the equalizer, press and hold the AUDIO button : for longer than two seconds. The display shows the DSA menu. Press the softkey 5 with the display label "USER EQ". Select an equalizer setting. Automatically calibrating the equalizer You can perform ...
Page 43 - Selecting the Equalizer
95 EN GLISH While you are adjusting the equalizer, the values are graphically shown on the dis-play. Perform all settings for both channels as described above. Press the OK joystick 8 or the AUDIO button : to exit the menu. The settings are saved. Selecting the Equalizer After the calibration or the...
Page 45 - Calibrating DNC
97 EN GLISH DNC D ynamic N oise C overing DNC allows for raising a volume when driv-ing that is considered pleasant for a non-driving vehicle. The increase differs according to frequency ranges, dependent upon the noise develop-ment of the vehicle. Hence, volume and sound remain at a pleasant level ...
Page 46 - Selecting a DNC increase
98 Selecting a DNC increase You can adjust the DNC increase, i.e. the sensitivity of the increase in volume and sound, in fi ve increments. The setting "DNC 1" is suitable for vehicles with loud engines and bass-loaded music. The setting "DNC 5" is suitable for vehicles with quiet eng...
Page 47 - Setting the low-pass fi lter
99 EN GLISH Subwoofer and centre speaker Adjusting the subwoofer phase position You can adjust the phase position of the subwoofer output to your subwoofer and select between "-135°" and "180°" in incre-ments of 45°. Press the AUDIO button : . "AUDIO MENU" appears on the disp...
Page 48 - Adjusting the centre speaker
100 Move the joystick 8 left or right to se- lect among the available frequencies. Move the joystick 8 up or down to select the desired quality factor for the defi ned frequency. When you have fi nished making your changes, press the OK joystick 8 or the AUDIO button : . Adjusting the centre speaker Y...
Page 49 - Crossover; AUDIO
101 EN GLISH Crossover In crossover mode, the high frequencies are played via the front channels and the low frequencies via the rear channels. Press the AUDIO button : . "AUDIO MENU" appears on the display. Press the NEXT button 4 . "AUDIO MENU 2" appears at the bottom of the displa...
Page 50 - instead of
102 Amplifi er/Sub-Out The car sound system provides connec-tions that allow you to connect external amplifi ers. In addition, you can connect a subwoofer to the integrated low-pass fi lter of the device. For this purpose, the ampli-fi er and subwoofer must be connected as described in the installation ...
Page 51 - Switching the AUX input on/off
103 EN GLISH Switching the AUX input on/off Press the MENU button 9 . Press the softkey 5 with the display label "AUX". The AUX menu is displayed. If no CD changer is connected and you want to connect an external audio source, press the softkey 5 with the display label "AUX1". With e...
Page 52 - Entering a switch-on message
104 Miscellaneous Entering a switch-on message If you switch on the device, a brief message is shown on the display as scrolling text. This text is factory set to "BLAUPUNKT-THE ADVANTAGE IN YOUR CAR". Instead, you can enter your own text of up to 35 char-acters. Press the MENU button 9 . Pr...
Page 53 - Amplifi er
105 EN GLISH Specifi cations Amplifi er Output power: 4 x 18 watts sine at 14.4 V and 1% distortion factor at 4 ohms. 4 x 26 watts sine in accordance with DIN 45324 at 14.4 V at 4 ohms. 4 x 50 watts max. power Tuner Wavebands:FM: 87.5 – 108 MHz MW: 531 – 1 602 kHz LW: 153 – 279 kHz SW: 5.85 – 6.30 MHz...
Page 55 - BP; Gerätepass
Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim 04/06 - CM-AS/SCS (dt, gb, fr, it, nl, sw) Name: ..................................................................... Typ: .................................................................... Serien-Nr: BP ....................................
