Page 2 - Overview
2 Overview 2 1 3 The Lucca features the following buttons next to its screen: 1 On/Off : Press for more than 3 seconds to turn the Lucca On or Off Press briefl y to turn the screen On or Off. (Economy mode) 2 MENU button : Press for more than 3 seconds to open the main menu.Press briefl y to open the ...
Page 3 - Contents
3 Contents Contents Overview ........................................... 2 Safety instructions ........................... 5 Navigation safety instructions ................... 5 Safety instructions for handling the Lucca 5 Using the CD/DVD .................................... 5 Using the Lucca for t...
Page 5 - Safety instructions; Navigation safety instructions
5 About these instructions Safety instructions Safety instructions Please read the following safety instructions and warnings carefully before using the Lucca for the fi rst time. Safety instructions for handling the Lucca Caution: The Lucca must not be exposed to water or damp as it is neither water...
Page 6 - Lucca scope of delivery; Protective touch screen foil; Selecting your language; Initial commissioning
6 Using the Lucca for the fi rst time When turning on the Lucca for the fi rst time, you will be prompted to select your preferred language. (Please read the section “Selecting your language” below.) Once you have selected your language, you will have to wait a couple of minutes before being able to s...
Page 7 - Charging the battery; Attaching the suction cup holder
7 Charging the battery The rechargeable battery enables the Lucca to be operated without requiring an external source of power. The battery must be fully charged (by recharging it for approx. 5 to 6 hours) to achieve the maximum battery run time of up to 3 hours. The battery charge indicator is alwa...
Page 8 - AA; Removing the Lucca; Turning the Lucca On/Off; Activating / deactivating sleep mode; Installing the Lucca into a car
8 Connecting the Lucca to the suction cup holder The suction cup holder is equipped with a guide for attaching the Lucca. Carefully engage the guide on the Lucca with the bar on the suction cup holder. AA Removing the Lucca Carefully pull the Lucca up and off the suction cup holder. ➜ ➜ Turning the ...
Page 9 - The MENU button
9 The MENU button The MENU button can be used to open the Quick Settings (press briefl y) or to go back to the Main Menu (press for more than 3 seconds), from where the Navigation, Music Player or Picture Viewer applications can be started. Quick Settings The Quick Settings menu can be used to adjust...
Page 10 - Onscreen keyboard; Done; Buttons; Help; Controller; Using the navigation menus
10 Using the navigation menus Onscreen keyboard The Lucca features a soft (onscreen) keyboard that will be shown on the touch screen when required to enter text. Using your fi ngers, tap the relevant keys on this keyboard to enter text or data.There is no need to use special characters or Umlauts whe...
Page 11 - Information on GPSs; View GPS info; Time Synchronise
11 Information on GPSs You can view the GPS’s status in the GPS Info menu. This menu can furthermore be used to view GPS-derived information, such as your current position and speed. The GPS Info menu can be opened in the Navigation menu. View GPS info Press the Navigation button in the main menu.Th...
Page 12 - General navigation information; Start navigating; Entering a destination; Settings
12 Navigation General navigation information Use of the Lucca is at your own risk! Caution: Never operate the Lucca while driving as this could lead to accidents affecting yourself and others!Only ever look at the screen when there is absolutely no doubt that it is safe to do so as regards the traffi...
Page 13 - Basic settings; Daylight saving time
13 Please read the chapter “Basic settings” for more information. Viewing GPS info Press the GPS info button to view GPS information. Please read the chapter “GPS” for more information on this. Close menu Press the Back button in the Navigation menu to return to the main menu. Basic settings Before ...
Page 14 - Other City
14 Entering a destination Lucca will always guide you through the destination entering process by: asking for a destination town, street and house number.Once entered, destinations are automatically saved so that they can be repeatedly and quickly accessed again at a later time. NB: You can only ent...
Page 15 - Entering coordinates
15 Enter a street name and press Done . The onscreen keyboard will now come up to enable you to enter the number of the house you would like to navigate to. You can now enter a house number or navigate to an intersection (junction):Press on the Find Intersection button. A list containing the streets...
Page 19 - Entering Way Points
19 Minimising/maximising the map You can minimise or maximise the map to view the area your destination is located in on the map. Use the Plus/Minus buttons to minimise and maximise the view of the map. Entering Way Points You can use the Edit Way Points menu to enter Way Points on the map. You can ...
Page 20 - Administrating destinations
20 NB: If the Lucca is receiving GPS signals, it will automatically use its current position as the starting point for any route. Route To : To use this place as a destination Add Via : To use this place as an intermediate destination Continue : To use this place as a fi nal destination. The Lucca wi...
Page 21 - Pins; Placing a pin
21 You will now be shown an input mask.Enter a new name for the destination.Press OK . The destination will now be renamed. Deleting a destination (Favourites only) Press the Navigation button in the main menu.The Navigation menu opens. Press the Destination button.The Destination menu opens. Press ...
Page 22 - Selecting route parameters; Pins Selecting
22 Press the Advanced Settings button.The Advanced Settings menu opens.Press the User data management button.The User data management menu opens. Press Remove Pins to delete all of the pins shown on the map.You will now be shown a confi rmation prompt.Press No if you do not want to delete the pins.- ...
Page 23 - Toll Roads; Route guidance
23 FerriesPermit needed , e.g. roads accessible only to permit holders and emergency vehicles MotorwaysU-turns (making a U-turn) Toll Roads Some road types will be automatically excluded from use in route planning depending on the vehicle profi le you selected, i.e. a route planned for a cyclist will...
Page 24 - GPS reception problems; Cancel route guidance; Arriving at your destination
24 NB: When planning a route, the Lucca will always take the route parameters, which can be viewed and changed in the Route Parameters menu, into account. (Chap. “Selecting route parameters”) GPS reception problems If the GPS is unable to receive a signal once the destination has been entered, the c...
Page 25 - Route To; Using the map; Show map; Moving the map
25 Starting route planning without the use of GPS signals If you do not have any GPS reception, you can still start route planning in order to gain an overview of the route. You can do so provided: You have entered a destination as described in the chapter “Entering a destination”.- or -You have sel...
Page 27 - Caution; Navigational aids; Map view during route guidance
27 Map view during route guidance During route guidance, the map view will feature a range of navigational aids and route information. Caution Please note that information displayed on the map might not always be fully up to date, such as in the case of emergency road works etc!The local traffi c sit...
Page 29 - Avoid ...
29 Additional navigation functions The features described in this chapter are only available once a route has been planned (with or without use of the GPS signals). (Chap. “Route planning” and chap. “Route planning without the use of GPS signals”) Adding/Deleting a Way Point You use the Edit Way Poi...
Page 30 - Route information; Fit To Screen; Detours; Additional navigation functions
30 Route information The Route Information menu can be used to choose additional information on the route to be displayed on the map. The Route Information menu can also be used to open the Route Parameters menu. You can also view the Route Information menu by pressing on the route information shown...
Page 31 - Track logs
31 Select the distance for which you want to block the route (starting from your current position).The Lucca will now plan the route anew and circumvent the blocked section of the route. NB: If you want to remove the block placed on a section of the route, you have to end route guidance. To continue...
Page 33 - Info ...; General settings
33 Basic settings The Settings menu can be used to change the Lucca’s settings and to view product information. Press on the Info … button to view additional information on the Lucca’s software. General settings Press the Navigation button.The Navigation menu opens. Press the Settings button.The Set...
Page 38 - Preparation; Inserting the SD/MMC card; GPS operating principle
38 GPS operating principle The Global Positioning System (GPS) was developed by the American military in the 1970’s. GPS’s rely on a total of 24 satellites that are orbiting the earth and transmit signals. The GPS receiver uses the time delay between transmission and reception of these signals to ca...
Page 39 - Opening the Music Player; MENU; MENU; Music Player
39 Music Player You can also use the Lucca to playback audio fi les from a SD/MMC card. The Lucca recognises the following audio fi le formats: MP3, WMA and OGG. Audio content is played back either over the Lucca’s internal speaker or a set of headphones. The chapter “Using the SD/MMC card” contains i...
Page 40 - Starting the Picture Viewer; Operating the Picture Viewer; Slideshow; Full screen mode; Picture Viewer
40 Picture Viewer You can also use the Lucca to view images stored on a SD-/MMC card. Lucca recognises JPG, GIF and BMP format image fi les.The chapter “Using the SD/MMC card” contains information on how to use and prepare the card. Starting the Picture Viewer Turn on the Lucca using the On/Off butto...
Page 41 - Lucca software; Updating the navigation software; Uploading cartographic material
41 Uploading cartographic material The cartographic material of the country in which you bought your Lucca will have been pre-installed onto your Lucca. This cartographic material will also be provided on the supplied CD/DVD for later re-installation. Depending on the version you bought, the supplie...
Page 42 - Operating temperature:; Disposal of old appliances; Technical data
42 Technical data Operating system: Microsoft Windows CE 5.0 Processor: Atlas II Dual Core Processor (300 MHz) Hard drive / memory: 64 MB DRAM 512 MB NAND Flash Dimensions (mm): 115 (W) x 80 (L) x 25 (H) Weight (g): approx. 190 GPS: QuickFind-Technology Centrality GPS 20 channels Battery: Rechargeab...
Page 43 - Why does the Lucca need GPS reception?; Why doesn’t the battery last longer?
43 Frequently Asked Questions /FAQ Why does the Lucca need GPS reception? The Lucca needs GPS reception to determine its position. It receives information both on its location and direction of travel from the GPS satellites. This is what enables the Lucca to safely guide you to your destination. Why...
Page 44 - FAQ
44 How long does it take to download data from the SD-/MMC into the Lucca’s memory? Around 15 minutes depending on the size of the data. Is it possible to play DRM protected WMA fi les on the Lucca? It is not possible to play Digital-Rights- Management protected WMA fi les (WMA-DRM) since it is not po...
