Page 2 - Table Of Contents
1 Table Of Contents Important Safety Instructions--------------------------------------------------1 Characteristic Features ---------------------------------------------------------3 Disc Information -------------------------------------------------------------------4 Front Panel-------------------...
Page 3 - Important Safety Instructions
- 2 - Important Safety Instructions CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. NOTE: Before plugging the power cord into an AC outlet, make sure that all the connections have been made. CAUTION: These servici...
Page 4 - Copyright Protection
- 3 - Important Safety Instructions Note: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product...
Page 5 - Characteristic Features; Multiple Mode; Advanced Playing Features
- 4 - Characteristic Features This product incorporates a DVD player, LCD display and TV receiver in one system. Multiple Mode DVD mode Component mode VGA mode TV mode CVBS mode S-VIDEO mode High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more th...
Page 6 - Disc Information; Discs Formats Supported By This Player; About Disc Terms; Chapter
- 5 - Disc Information Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) DVD Audio+Video (active picture) 12cm 484min(DS-DL) CD Audio 12cm 74min JPEG Still high resolution 12cm The operating method of some DVD discs is specified by ...
Page 7 - Front Panel
- 6 - Front Panel 1. 15" color TFT screen 15" color TFT screen clearly show the data. 2. SOURCE button Press to select the modes: DVD, Component, VGA, TV, CVBS or S-VIDEO. 3. MENU button Press to enter or exit setup menu. 4. CH ▲ / ▼ button In the TV mode, press to select channels. In setup ...
Page 9 - Rear Panel
- 8 - Rear Panel 1. Y/Pb/Pr Input Jack Connected to the Y/Pb/Pr input in Component mode. 2. L/R Audio Input Jack Connected to the L/R audio input in Component mode. 3. AV Output Jacks Connected to the external AV input device. 4. AV Input Jacks In the S-VIDEO mode, connected to S-VIDEO signal input....
Page 10 - Remote Control; Remote Control Drawing
- 9 - Remote Control Remote Control Drawing 1. POWER button Press to enter or exit the standby mode. 2. 0~9 Number buttons Press to select numbers. 3. LAST button In the TV mode, press to return to the channel last viewed. 4. MTS button Press to activate MTS function in TV mode. 5. VOL +/- button Pr...
Page 12 - Preparation of Remote Control
- 11 - Remote Control Preparation of Remote Control Softly push the back cover to open the battery compartment. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Softly press the back cover to close it. Under normal use the battery will la...
Page 13 - System Connections; Connecting to External AV Signal Source
- 12 - System Connections Do not connect the power cord until all other connections have been made. Ensure that you observe the color cord when connecting audio and video cables. Connecting to External AV Signal Source Use the audio and video cable to connect the AV input jacks on the rear panel of ...
Page 14 - Connecting to External AV Signal Source YPbPr
- 13 - System Connections Connecting to External AV Signal Source YPbPr Use the audio and video cables to connect the Y/Pb/Pr input Jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then press the S...
Page 15 - Connecting to External AV Device AV Out
- 14 - System Connections Connecting to External AV Device AV Out The unit supports AV signal output, it can be connected to the external audio and video devices. Use the audio and video cables to connect the AV output jacks on the rear panel of the unit to the external AV device.
Page 16 - Connecting to PC
- 15 - System Connections Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2. Connect the other end to the PC. 3. Connect on...
Page 17 - Connecting to Earphones
- 16 - System Connections Connecting to Earphones This unit can be connected to an earphone for listening to music privately. See the below figure for derails: After connecting to the earphone, the internal speakers output will turn off automatically. Connecting to Power Supply Plug the power supply...
Page 18 - Connecting to Car Adapter
- 17 - System Connections Connecting to Car Adapter Power also can be supplied through the DC power adapter (Car Adapter), one end is connected to the DC 12V IN jack on the rear panel of the unit, the other end to the vehicle’s 12V accessory/Cigarette Lighter Socket, as shown on the below: Attention...
Page 19 - Connecting to TV Antenna
- 18 - System Connections Connecting to TV Antenna This unit can be connected to the TV signal input source via the TV jack on the rear panel. After connection, turn on the power to the unit, press the SOURCE button to shift to TV mode. After connecting to the antenna, turn on the unit, and go on wi...
Page 20 - TV Function; Preparations
- 19 - TV Function Preparations 1. After connection, press the POWER button to turn on the power. (If it is turned on, the power indicator is blue.) 2. Press the SOURCE button to shift to TV mode. You can go on with the following operations: Image Setting Note: This item is only available when there...
Page 23 - Parental Setting
- 22 - TV Function Parental Setting Note: The Parental Function is the same as that of V-CHIP. Press the MENU button to enter the setupmenu. Press the ▲▼ button to select Parental and press the ENTER button to enter the menushown on the right. In the Parental setup menu, press the ENTER button and t...
Page 29 - DVD Playback
- 28 - DVD Playback Operation Preparation After connections, turn on the unit and select the relevant video input before playback. Disc Loading Steps: 1. Press the POWER button to turn on the power. Press the SOURCE button to shift to DVD mode. 2. Handing the disc with its printed side outward verti...
Page 30 - DVD Playback Operation
- 29 - DVD Playback Operation Stop Press the ■ STOP button once to stop playback and then press PLAY button to resume. Press this button twice to stop playback completely. Pause Press the PAUSE button once to pause the playback, press it repeatedly to start step-by-step playback, press the PLAY butt...
Page 31 - CD Playback
- 30 - DVD Playback Operation Language (Audio) There can be up to 8 audio languages on a DVD disc. When you play a multi-language DVD disc you can use press the AUDIO button on the remote control to select a language. Subtitle The DVD player can support multiple kinds of subtitles. When you play a m...
Page 32 - JPEG Playback
- 31 - DVD Playback Operation Fast Playback Press the or FWD/REV SCAN button on the remote control to activate fast backward or forward playback. Repeat Use the REPEAT button repeatedly to repeat Track, All or to cancel repeat. Some discs do not support the repeat function. Audio During CD playback,...
Page 35 - DVD System Setup
- 34 - DVD System Setup Preparations 1. Connect to the power supply and turn on the unit. 2. Press the SOURCE button to shift to DVD mode. 3. Press the SETUP button on the remote control to display the settings menu. The menu includes General setup, Audio setup, Video setup, Preference and Password ...
Page 37 - Audio Setup Page
- 36 - DVD System Setup Media Center Audio Setup Page Press the SETUP button to enter the General setup menu, then use the direction buttons to select Audio Setup Page, the screen will display as the below: Dolby Digital Setup Dual Mono In the menu, Use the direction buttons to select the desired it...
Page 38 - Video Setup
- 37 - DVD System Setup Dynamic Hdcd Setup In the Audio Setup Page, use the direction buttons to select Hdcd Setup , press the ENTER button to enter the setup, the screen will display as below: Video Setup Press the SETUP button to enter the General setup menu, then use the direction buttons to sele...
Page 40 - Preference Setup
- 39 - DVD System Setup Preference Setup Press the SETUP button to enter the General setup menu, then use the direction buttons to select Preference Page, the screen will display as the below: Audio Subtitle Disc Menu In the menu, Use the direction buttons to select the desired item. Press the ENTER...
Page 41 - Password Setup
- 40 - DVD System Setup Parental Default Password Setup Press the SETUP button to enter the setup menu, then use the direction buttons to select Password Setup Page, the screen will display as the below: 3. Press the direction buttons to select Default . 4. Press the ENTER button, all the settings w...
Page 43 - Other Function; External AV Input Function
- 42 - Other Function External AV Input Function The unit has external AV input function. It supports CVBS, S-VIDEO and Component modes. Use the audio, video and S-Video cable to connect the unit to the external AV signal source such as recorder, vidicon, satellite receiver or game player etc. Then ...
Page 44 - Troubleshooting; SYMPTOM CHECK
- 43 - Troubleshooting SYMPTOM CHECK ITEM The player cannot play. Make sure disc is loaded in. Make sure disc is loaded upside down. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc. Make sure water condensation has not occurred. If it ...
