Page 2 - Table of Contents
1 Table of Contents 1. Introduction ..............................................................................................................................2 1.1 Package Contents................................................................................................................2 1....
Page 3 - Package Contents
2 1. Introduction Congratulations on your purchase of the Wireless N USB Adapter. Its high bandwidth combined with extended wireless coverage delivers fast and reliable connection for all of your networking applications. The adaptor will yield a higher throughput is it is used with other Airlink101®...
Page 5 - The Autorun screen will pop up. Select; Install Utility and Driver; from the; Windows Vista Users; When you get a warning message make sure you click; Allow
4 Step 2.3 The Autorun screen will pop up. Select Install Utility and Driver from the menu. Note: If the Autorun screen doesn’t appear automatically, or if you get a blank white screen, go to Start, Run, and type D:\Utility\Setup.exe (where D is the letter of your CD drive) and click OK. Windows Vis...
Page 6 - The Airlink101 WLAN Monitor screen will popup. Click; Next; Click; Install; to begin the installation.
5 Step 2.4 The Airlink101 WLAN Monitor screen will popup. Click Next at the screen. Step 2.5 Click Install to begin the installation.
Page 7 - Continue Anyway; at the Windows Logo Screen.; Yes; at the Digital Signature Not Found prompt.; Install this driver software anyway; Finish; to complete the installation.
6 Step 2.6 Give Permission to Window to install the driver software For Windows XP click Continue Anyway at the Windows Logo Screen. For Windows 2000, click Yes at the Digital Signature Not Found prompt. For Windows Vista, click the Install this driver software anyway button. Windows will give you a...
Page 8 - Configuring the Adapter; Windows Vista; Skip the following steps. Continue to
7 3. Configuring the Adapter This section describes how to connect your wireless adapter to a wireless network. Open the Airlink101 Wireless Monitor utility by double clicking on the Airlink101 Wireless Monitor Utility icon in the system tray at the bottom right-hand corner of your screen. Windows V...
Page 9 - WPS; ) is a new and easy way to configure the
8 Windows XP will show: The Airlink101 Wireless Monitor of Windows XP gives you an option to Start or Stop the Wireless Zero Configuration. It is not recommended to check this Windows Zero Config box, if it is checked, you will be using the XP’s wireless utility instead of the Airlink101 Wireless Mo...
Page 10 - the connection is not able to establish, continue to Step 3.2.
9 The ‘Wi-Fi Protected Setup – PBC method’ window will popup to acknowledge you the Adapter is starting to establish a connection. 2. Push the WPS button of the Router. The picture shows Airlink101 AR670W router. 3. The router will now start the handshake with the wireless adapter. The connection wi...
Page 11 - Click the; Available Network; wireless network you wish to connect to, and click; Add to Profile; to
10 Step 3.2 Click the Available Network tab, select the SSID (Network Name) of the wireless network you wish to connect to, and click Add to Profile . If the network that you are attempting to connect does not have encryption enabled, you will receive a warning about connecting to an unsecured netwo...
Page 12 - OK; status of your connection. The; Status; should say Associated, and there will be green; Signal Strength; and
11 The Adapter may automatically detect the Network Authentication and the Data encryption. You need to enter the security settings in the appropriate boxes according to the settings of the router and then click OK to connect. If you need information regarding the encryption settings, please refer t...
Page 13 - Troubleshooting
12 Troubleshooting If you are experiencing problems with the connection (unable to connect, low signal strength, slow connection speed, not working, unstable wireless connection) you may want to tune your router’s signal by changing the channels on the router and/or by adjusting the direction of the...
Page 14 - allows you to show or hide the tray icon for the utility.; Radio Off; disables the wireless function of the adapter.; Disable Adapter; will completely disable the wireless adapter.
13 4. Wireless Monitor This section describes the various functions of the Wireless Monitor that you can configure, including the settings of wireless encryption. 4.1 General The General tab provides you with the status of the current connection, including signal, network name (SSID) and IP Address....
Page 15 - Profile Settings; Profile
14 4.2 Profile Settings The Profile tab lists the current profiles and allows you to create new profiles. The Available Profile(s) box lists all the profiles that you’ve created for your network. Profiles are automatically created and added to this list when you connect to new networks. You can also...
Page 16 - Enter a; Profile Name; SSID; . Enter the encryption settings for the profile. Click; to save the changes.
15 Enter a Profile Name and SSID . Enter the encryption settings for the profile. Click OK to save the changes. The Configuring Encryption section (section 4.7) will give you the information of how to set the different options of the wireless network encryption settings.
Page 17 - Available Network; Refresh; will refresh the list. To connect to a network, select a network from
16 4.3 Available Network The Available network tab lists all of the networks that the adapter detects in your area. Clicking Refresh will refresh the list. To connect to a network, select a network from the list and click Add to Profile .
Page 20 - Pin Input Config
19 4.6 Wi-Fi Protected Setup (WPS) The Wi-Fi Protected Setup™ ( WPS ) is a new and easy way to configure the encryption for your wireless network clients. In order to use it, you need to have a router that supports this feature, like the AR670W Airlink101 Wireless N Router. You also need to configur...
Page 21 - If you choose the Push Button method click the; Push Button Config; Push the WPS button on the router, and the blue LED of AR670W will
20 Step 4.6.2a If you choose the Push Button method; click the Push Button Config (PBC) tab. Step 4.6.2b Push the WPS button on the router, and the blue LED of AR670W will start blinking. The router will now start the handshake with wireless adapter. The connection will be built up in couple minutes...
Page 22 - If you choose the Pin Code method, write down the; PIN; and click
21 Step 4.6.3a If you choose the Pin Code method, write down the PIN and click Yes . Select the Access Point that you want to connect, and then click Select .
Page 24 - Continue; on the router configuration screen.; Wireless; . Make sure that the; Enable
23 After a few moments both the router configuration screen and the adapter configuration screen should show a message telling you that a connection is established. Step 4.6.3d Click Continue on the router configuration screen. Note: If you cannot connect successfully with WPS, you need to log in to...
Page 27 - or
26 4.7.1 Configuring WEP encryption Select WEP from the Data encryption box. Under Network Authentication , you will want to select Shared key or Open System , depending on the router settings. Select the encryption setting according to the setting of the router. • ASCII or PASSPHRASE will also be p...
Page 30 - Wireless Monitor; Click on; and click on; Add
29 4.8 Ad-hoc and Peer-to-Peer Wireless Networks Ad-hoc networking is used when you want to connect two or more computers together but you don’t have a router. In ad-hoc mode, you lose a lot of the features that come with a router. The maximum connection speed drops to 11Mbps. In addition, WEP encry...
Page 31 - Configuring Encryption; section of the; to save the profile.
30 You can also choose between no security or WEP security. If you choose WEP security, you can follow the instructions in the Configuring Encryption section of the manual. Click OK to save the profile. Select your new profile from the Available Profile(s) box, and double click to enable it. You nee...
Page 32 - About
31 make sure that you do this on every ad-hoc machine so that they will all be set to the same channel. 4.9 About The About window provides the information about the Wireless Monitor Utility version and the current driver version.
Page 33 - Appendix A - Specification; Frequency Band
32 Appendix A - Specification Frequency Band • 2.4Ghz Standards • IEEE 802.11b / 802.11g • IEEE 802.11n draft 2.0 Interface • USB 2.0 Data Rate • Downlink: 300Mbps • Uplink: 150Mbps Antenna type • Built-in 2 print antennas Security • WPA2/WPA-PSK (AES) • TKIP and WEP support 802.11b/g mode only LED ...
Page 34 - Technical Support
33 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Theoretical maximum wireless signal rate derived from IEEE standard 802.11g and draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, in...
