Airlink101 AR660W3G - Manual

Page 2 - Connecting the Router; Prior to connecting the router, be sure to power off your; Section 1; Power; Introduction

Congratulations on your purchase of AR660W3G Wireless N 3G/3.5G Mobile Router. This product is specifically designed for business travelers or SOHO needs. It provides an extended WAN solution, 3G Mobile USB modem card for Internet surfing besides regular Cable or DSL modem and is easy to share the I...

Page 3 - G USB Modem

Step 1 Option 1 Plug the 3G/3.5G USB modem card into the USB slot on the front panel of the router. Option 2 Connect one end of a network cable to the WAN port of the router and connect the other end of the cable to the DSL/Cable modem. Power on the modem. Step 2 With another network cable, connect ...

Page 5 - Configuring the Router; Enter; Section 2

Configuring the Router Step 1 Open the web browser (Internet Explorer or Mozilla Firefox) from the computer that is wired to the Router, type 192.168.2.1 in the Address bar and press Enter . Step 2 Enter admin for both the username and password fields and click OK . Flashing WAN port is transferring...

Page 6 - Click; Setup Wizard

Page 7 - Configure the Time Zone Settings of the Router. Click; Next; Select WAN type by which Internet service you are using. This guide

Step 4 Configure the Time Zone Settings of the Router. Click Next . Step 5 Select WAN type by which Internet service you are using. This guide will provide instructions on these WAN types: 3G/3.5G, Cable, and DSL.

Page 9 - DSL; or; Option 1: PPPoE Settings; for your WAN type. Enter your user name and

DSL For DSL users, your Internet type is either Dynamic IP or PPPoE . If you are not sure which one you have, it is suggested to select PPPoE xDSL for your WAN type, and if you cannot connect to the Internet after the Setup Wizard finished, go through the Setup Wizard again and select Cable Modem . ...

Page 10 - Depending on the ISP, you may need to include the domain name; Option 2: Dynamic IP Settings; for your WAN type.; Clone MAC; and click; Keep the default SSID (wireless network name) or change it to a

Note: Depending on the ISP, you may need to include the domain name with your username. Example: [email protected] Option 2: Dynamic IP Settings Click on Cable Modem for your WAN type. When the Dynamic IP settings come up, leave click Clone MAC and click Next . Step 6 Keep the default SSID (wir...

Page 11 - Set up Wireless Security for your router.

Step 7 Set up Wireless Security for your router. WPA2(AES) is the most secured encryption mode for general users. WEP is the most common encryption but the least secured. It is recommended to use WPA2 (AES) for your wireless security if all wireless devices on your network can support this mode. WPA...

Page 12 - OK; to save the settings.; WEP; for Security Mode.

WPA Unicast Cipher Suite: Select WPA2(AES) Pre-Shared Key Format: Select Passphrase Pre-shared Key: Enter a key between 8 to 63 characters (alphanumeric, case sensitive). This is the security key for your wireless network Click OK to save the settings. WEP Select WEP for Security Mode.

Page 14 - Connecting to the Router Wirelessly; Vista; computer. You can also; Section 3

If either section has valid IP addresses being assigned, the router is connected to the Internet. Connecting to the Router Wirelessly You must configure your wireless computer in order to establish a wireless connection to the router. In this section, you can find the instructions of how to connect ...

Page 15 - Wireless networks are available.; Click on the wireless network you want to connect to and click; Connect

Step 1 Click on this icon on the task bar of your desktop, then click on Wireless networks are available. Step 2 Click on the wireless network you want to connect to and click Connect .

Page 16 - Enter the Security key you configured for the Router (see Step 8 in; Click on; Close; . Now the wireless connection has been established

Step 3 Enter the Security key you configured for the Router (see Step 8 in Section 2). Click Connect . Step 4 Click on Close . Now the wireless connection has been established successfully with the Router.

Page 17 - Go to the computer with Airlink101 Wireless N adapter, AWLL6077; Step 2; Push and hold the Easy Setup Button on the Adapter until you see

Connecting to the Router with Easy Setup Button The AR660W3G Airlink101 Wireless N 3G/3.5G Mobile Router has a Easy Setup Button built-in which allows you to connect your wireless computer with the router easily and safely. Your wireless adapter must support this feature (WiFi Protected Setup™) as w...

Page 18 - Within the following 2 minutes, push the Easy Setup Button on the; Step 4

You will see this window pops up on the monitor: Step 3 Within the following 2 minutes, push the Easy Setup Button on the Router. The WLAN LED on the Router will stay solid green instead of blinking. Step 4 The Router will now start to synchronize the security settings with the wireless adapter. Whe...

Page 19 - Troubleshooting; Power off the Cable/DSL modem, router, and computer and wait for; minutes; Turn on the Cable/DSL modem and wait for the lights on the modem; Section 5

Troubleshooting If you have trouble connecting to the Internet with the Cable/DSL modem , try the following steps: Step 1 Power off the Cable/DSL modem, router, and computer and wait for 5 minutes . Step 2 Turn on the Cable/DSL modem and wait for the lights on the modem to settle down. Step 3 Turn o...

Page 20 - Verify that the; Internet; Technical Support

Step 6 Verify that the Internet IP Address , Subnet Mask , and Default Gateway have valid numbers assigned to them (instead of all 0’s). If you have trouble connecting to the Internet with the 3G/3.5G USB modem , there are few things your can try: 1. Make sure your 3G/3.5G modem is compatible with A...

Airlink101 AR660W3G - Manual

Table of Contents:

Summary

Other Airlink101 Models