Airlink101 AICN777W - Manual
Airlink101 AICN777W – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Getting Started; Step 1; Connect one end of the Ethernet cable to the IP Camera and connect; Step 2; Power on the IP Camera by connecting one end of supplied power; Step 3; Section 1; Package Contents
- Page 3 – Installing the SkyIPCam Utility; Insert the provided CD and wait for the auto-run screen to appear.; Install SkyIPCam Utility; Section 2
- Page 4 – Follow the installer instruction by clicking; Next; on the following screens.; Close; to complete the installation.
- Page 5 – Using the SkyIPCam Utility; Go to; Utiliy; : If the Camera’s IP address does not show up in the window, make sure; Search; Section 3
- Page 7 – Step 5; When you are prompted for the username and password, enter
- Page 8 – Step 7
- Page 10 – Apply; and the configuration is completed.
- Page 11 – Viewing Images; If you know the IP address of your network camera, you may open the; Enter; “admin”; for both the; User name; and; Password; Section 4
- Page 12 – Click on; Install; . Once the installation is completed, you may be able to
- Page 13 – Step 6; or counter-clockwise to adjust the focus.
- Page 15 – , and open the Airlink101 SkyIPCam Utility.; Select your camera from the list and click; Link; Follow Step 3 to Step 6 mentioned in Method 1.
Quick Installation Guide
SkyIPCam777W
Wireless MPEG4 Night Vision Pan & Tilt
Network Camera
Model # AICN777W
Ver. 1A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
This Quick Installation Guide only provides basic instructions. For detailed information on using this product, please refer to the User’s Manual on the supplied CD. Getting Started Step 1 Connect one end of the Ethernet cable to the IP Camera and connect the other end to one of the LAN ports on you...
Installing the SkyIPCam Utility Step 1 Insert the provided CD and wait for the auto-run screen to appear. Step 2 Click on Install SkyIPCam Utility . Note: If the auto-run screen does not appear automatically, go to Start, Run, type: D:\ Utility\Setup.exe (where D is the letter of your CD drive) and ...
Step 3 Follow the installer instruction by clicking Next on the following screens. Step 4 Click Close to complete the installation.
