Page 3 - Checking the Package Contents; NOTE
- 2 - C H AP T E R 1 I N T R O D U C T I O N T O Y O U R C AM E R A 1.1 Checking the Package Contents Check the items contained in the package carefully. You should have the following: One W ireless N Night Vision Pan/Tilt Network Camera One External Antenna One AC Power Adapter One W all Mount Kit ...
Page 4 - Getting to Know Your Camera; Front View
- 3 - 1.2 Getting to Know Your Camera Front View Internal Microphone allows the camera to receive sound and voice. LED Indicators: Power (left, steady amber light) indicates the camera is powered on. Link (right, flashing green light) indicates the camera’s network connectivity. Light Sensor is used...
Page 5 - Rear View
- 4 - Rear View GPIO is used to connect an external devices. Reset Button will restart the camera when it is pressed quickly; when it is pressed and held for five seconds, the camera will restore the factory default settings. DC Power Connector connects the AC power adapter, in order to supply power...
Page 6 - Features and Benefits; GPIO Trigger; window of
- 5 - 1.3 Features and Benefits MPEG4/MJPEG Dual-Codec Supported The camera provides user with excellent images by the MPEG4/MJPEG dual-codec selectable technology, allowing user to adjust image size and quality, and bit rate according to the networking environment. 2-way Audio Capability The built-...
Page 7 - System Requirements; Networking; Intel Pentium III 800MHz or above; Accessing the Camera using Software SkyIPCam UltraView; Microsoft® W indows® 7, Vista and XP; Suggested Hardware Requirement; Intel Core 2 Duo 2GB RAM
- 6 - 1.4 System Requirements Networking - LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet. - WLAN: IEEE 802.11b/g/n, data rate up to 150Mbps* Accessing the Camera using Web Browser - Supported Browsers*: Microsoft® Internet Explorer 6.0 or above; Apple Safari, Mozilla Firefox with JAVA plug-in ...
Page 8 - Installing the Wall Mount Kit
- 7 - C H AP T E R 2 H AR D WAR E I N S TAL L AT I O N 2.1 Installing the Wall Mount Kit The camera comes with a Wall Mount Kit, which allows you to place your camera anywhere by mounting the camera through the three screw holes located in the base of the Wall Mount Kit. Wall Mount Kit Screw Screw S...
Page 10 - Applications of the Camera; The camera can be applied in multiple applications, including:
- 9 - 2.3 Applications of the Camera The camera can be applied in multiple applications, including: Monitor local and remote places and objects via Internet or Intranet. Capture still images and video clips remotely. Upload images or send email messages with the still images attached. The following ...
Page 11 - Setting up Your Camera; Step 1; Insert the provided CD into your computer’s CD ROM drive.; Install Utility and Software; when the autorun menu pops up on the screen.
- 10 - C H AP T E R 3 C AM E R A C O N F I G U R AT I O N 3.1 Setting up Your Camera Step 1 Insert the provided CD into your computer’s CD ROM drive. Step 2 Click on Install Utility and Software when the autorun menu pops up on the screen.
Page 12 - an AutoPlay window pops up on screen, please make sure you give; Install; to install the SkyIPCam utility and Ultraview.
- 11 - Note: If you do not see the above autorun menu pops up on the screen, please go to your CD-ROM drive > UltraView folder > run “ Setup.exe ”. Windows 7 and Vista users: an AutoPlay window pops up on screen, please make sure you give permission to run the setup program by clicking Autorun...
Page 13 - Click; Finish; when installation finishes.; Start
- 12 - Step 4 Click Finish when installation finishes. Step 5 Open SkyIPCam Utility by double clicking its icon on the desktop, or clicking Start , then go to (All) Programs > Airlink101 SkyIPCam UltraView > SkyIPCam Utility .
Page 16 - to let your router
- 15 - Step 10 You may simply accept the suggested default setting DHCP if your router’s DHCP server is enabled, so the router will automatically assign a dynamic IP address to your camera. Another option is to select Static IP, t he IP address you configure must match with your local network settin...
Page 18 - Apply; and the
- 17 - Step 13 Confirm your settings at the last window. If everything is correct, click Apply and the configuration is complete.
Page 19 - Viewing Image via Your Camera; Method A > Access Camera from SkyIPCam Utility; Step 1A; Method B > Access Camera from Web Browser; Step 1B; Type the IP address of your camera in the Address bar, and press; Enter
- 18 - 3.2 Viewing Image via Your Camera Method A > Access Camera from SkyIPCam Utility Step 1A Open Airlink101 SkyIPCam Utility, select the camera you wish to connect to and click on Link button. Go to Step 3 . Method B > Access Camera from Web Browser Step 1B If you assigned a static IP addr...
Page 20 - Enter user name and password, then click; OK; . The default user name and password are both; admin; ” if you did not make any change to it at Step 9, Section 3.1.; Step 4; or; Install ActiveX Control
- 19 - Step 3 Enter user name and password, then click OK . The default user name and password are both “ admin ” if you did not make any change to it at Step 9, Section 3.1. Step 4 Internet Explorer User: If this is the first time for your computer to view image from the web configuration page, you...
Page 21 - Step 5; Click on; Run; , then you will be able to view the image.; Note; you have Java and Quick Time add-ons installed.
- 20 - Step 5 Click on Run , then you will be able to view the image. Note If you are using Mozilla Firefox or Safari and you are not able to view any image, please make sure you have Java and Quick Time add-ons installed. Step 6 To get a clear view of images, you can simply rotate the camera’s lens...
Page 25 - Network Settings; IP Setting; Utility to obtain the related setting values.; IP; Subnet Mask; Default Gateway
- 24 - 4.2 Network Settings The Network menu contains three sub-menus that provide the network settings for the camera, such as the IP Setting, DDNS Setting, and IP Filter. Network >> Network IP Setting This item allows you to select the IP address mode and set up the related configuration. - ...
Page 26 - THIS IS MANDATORY IF YOU WANT TO USE FTP OR EMAIL FUNCTIONS
- 25 - recommended that you input the Default Gateway of your network, which is the IP address of your router. Check with your router manufacturer for that information. THIS IS MANDATORY IF YOU WANT TO USE FTP OR EMAIL FUNCTIONS - PPPoE: Select this option when you use a direct connection via DSL mo...
Page 28 - Open
- 27 - Network >> Wireless Setting The camera supports W LAN while you use the wireless network. Select the Enable option to enable this feature. The camera supports W ireless feature that can connect to your wireless network. Select the Enable option to enable this feature. Network ID (SSID):...
Page 30 - Please; Site Survey
- 29 - Network >> Wireless >> WPS Setting The camera supports W PS (WiFi Protected Setup™) feature that allows your camera to connect to the wireless network easily and safely without manually configuring the wireless security settings. Please note that Your AP/Router must support WPS fe...
Page 31 - Calibration; to calibrate the position of the camera lens.; Auto Patrol Stay Time:; Set the stay time (1~999 seconds) of each preset positions when the
- 30 - 4.3 Pan/Tilt Settings The Pan/Tilt menu allows you to configure the pan/tilt functions of the camera. Pan & Tilt >> Pan & Tilt Settings - Pan/Tilt Calibration: Click Calibration to calibrate the position of the camera lens. - Pan Steps: Set the changing range (1~20 degrees) when...
Page 36 - Email; Enter the mail server address. For example,; Sender Email Address:; Enter the user name to login the mail server.; addresses under “Network” to let the Email function work properly.; Test; to find out if the related configuration is
- 35 - Event Server Setting >> Email Email - SMTP Server Address: Enter the mail server address. For example, mymail.com . - Sender Email Address: Enter the email address of the user who will send the email. For example, [email protected] . - Sender User Name: Enter the user name to login the ma...
Page 38 - To enable the detecting area, select; Window 1; Enable; Assign a name to the detecting area.; Event Config
- 37 - 4.6 Motion Detect *This function can only be configured in W indows Internet Explorer. The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera. The camera provides two detecting areas. To enable the detecting area, ...
Page 40 - Event Configuration >> Motion Detect Trigger
- 39 - - Profile Name: Display the profile name that you select in the Schedule Profiles list. - Weekdays: Select the weekday(s) that you want to separately assign in the schedule profile. The weekday that has been assigned will be displayed with green color. - Time List: Display the time period tha...
Page 45 - About the Control Buttons; Control Buttons of RS-485; buttons allow you to move the camera lens position. Clicking the; Home; Click the; Number button
- 44 - About the Control Buttons After enabling RS-485 function, the control panel will appear on the Live View window. Control Buttons of RS-485 - Left/Right/Up/Down/Home buttons allow you to move the camera lens position. Clicking the Home (center) button will move the camera lens to the assigned ...
Page 46 - The Logs table displays the events log recorded by the system.
- 45 - 4.11 Information The Information menu displays the current configuration and events log of the camera. Information >> Device Info Display the Basic, Video & Audio, and Network settings of the camera. Information >> System Log The Logs table displays the events log recorded by ...
Page 47 - I PC; Starting the Program; Configuring the System > User
- 46 - C H AP T E R 5 U S I N G S K Y I PC AM U LT R A V I E W 5.1 Starting the Program To start UltraView Pro, click Start (All) Programs Airlink101 SkyIPCam UltraView SkyIPCam UltraView . Alternatively, you can start the program by simply double-clicking the program icon on the desktop of your com...
Page 48 - Main Window and Item Feature
- 47 - 5.2 Main Window and Item Feature When you start and login to UltraView, the Main window will display as below: The Main window provides you with the information on operating the system, as well as the control panel such as the Quick Launch buttons, and so on. NOTE UltraView Software requires ...
Page 49 - buttons in this area allow you to switch the camera view mode.; storage space of the system.
- 48 - Camera View Mode buttons in this area allow you to switch the camera view mode. Button Function Display the connected camera(s) in single camera view mode. Display the connected camera(s) in quad view mode. Display the connected camera(s) in 3 x 3 grid view mode. Display the connected camera(...
Page 50 - Patrol; Stop
- 49 - number (1~8) from the Go button. Navigation Buttons (Left/Right/Up/Down/Home). If the connected camera features pan/tilt functions, the Navigation buttons allow you to move the camera lens position. Clicking the Home (center) button will move the camera lens to the assigned home position. / T...
Page 51 - Accessing the Camera; Adding a Camera; Device Setting; to display the Device Setting window.; New
- 50 - 5.3 Accessing the Camera Before you can access the camera, you have to add the camera to the system. Adding a Camera 1. Click the button and select Device Setting to display the Device Setting window. 2. Click New .
Page 52 - Device Search; When search is finished, select the camera and click; Add
- 51 - 3. Click Device Search to search the camera(s) within your network. 4. When search is finished, select the camera and click Add .
Page 53 - Preview; and; Save
- 52 - 5. The information of the camera will be displayed on the window. When completed, click Preview and then click Save to return to the Device Setting window. The added camera will be displayed in the Device List. Option Description Camera Title You have to assign a descriptive name for the came...
Page 55 - Detect
- 54 - 7. Click on the button Motion detection area to enable and set up the motion detection feature of the camera. A new window pops up with settings for motion diction. Please refer to section 4.6 Motion Detect for more details.
Page 56 - Editing / Deleting a Camera
- 55 - Editing / Deleting a Camera Since you have added camera(s) to the system, you can select one to edit or remove. 1. On the Device Setting window, the connected camera(s) will be displayed in the Device List. 2. To delete the camera: select the desired one and then click Remove . When prompted,...
Page 57 - Viewing Image of the Camera; The; Information
- 56 - Viewing Image of the Camera Since you have added camera(s) to the system, the image of the selected camera(s) will be displayed on the Live View W indow automatically. You can view a maximum of 32 cameras simultaneously. Additionally, you can select one-camera or other view mode to display th...
Page 58 - Enabling / Disabling Recording
- 57 - 5.4 Recording / Playing Video Enabling / Disabling Recording Press Preview to activate the settings. While you are adding/editing the camera, you can enable the recording function for the camera by selecting the Record option. Click Save after you finish setting. Alternatively, you can set al...
Page 59 - Configuring the Recording Settings
- 58 - Configuring the Recording Settings The default directory for saving the recorded video files is “C:\”. You can change the target folder for saving the files in the Record Setting option. 1. Click the button and then select Record Setting . 2. To assign the target folder for saving the recorde...
Page 60 - Setting up Schedule for Recording
- 59 - Setting up Schedule for Recording The system features the schedule recording so that you can set up the schedule to record as you need. Click the button to display the Schedule Configuration window, which allows you to configure the recording schedule. 1. Click New , and then enter the Schedu...
Page 61 - Playback the Recording Files; Search; The search result will be displayed in the Record File list.; Play
- 60 - Playback the Recording Files NOTE Divx/Xvid codec is required for the system to play the video files. If the video clips cannot be displayed in the Playback window normally, click the following path to download and install the required component: http://download.divx.com/divx/DivXInstaller.ex...
Page 62 - Configuring the eMap View Setting; to configure the camera view setting of eMap mode.; View Setting; Enter the; eMap Nam
- 61 - 5.5 Configuring the eMap View Setting Click the button and select View Setting to configure the camera view setting of eMap mode. eMap refers to the geography and device scope of the UltraView Software, which visually presents the devices in your security system. It uses a background of the a...
Page 64 - When completed, click; to go back to the Main window.; eMap View
- 63 - 5. When completed, click Save . Click Back to go back to the Main window. 6. To view from eMap: a. Click the button and select eMap View .
Page 65 - Select the map from the eMap Name list.
- 64 - b. Select the map from the eMap Name list. c. Click the camera icon, the camera window will then pop up to display the image of that location.
Page 66 - Camera Status; Editing / Deleting the eMap
- 65 - 7. To view Camera Status: Click the button and select Camera Status . It shows the camera status as below. Editing / Deleting the eMap 1. Click the button and select View Setting . 2. To edit the eMap: In the eMap List, select the desired map and click Modify . The map’s information will be d...
Page 67 - Configuring the System
- 66 - 5.6 Configuring the System 1. User management: Click the button and select Account to change the administrator password for the UltraView software. Enter the Current password , and then enter the new password twice (in the Type new password and Retype password boxes). When completed, click Sa...
Page 69 - Version; to display UltraView software version number.
- 68 - 3. To check the version number: Click the button and select Version to display UltraView software version number.
Page 70 - System Setting; to set the Auto Scan time interval.
- 69 - 4. System Setting: Click the button and select System Setting to set the Auto Scan time interval.
Page 71 - Event Configuration; Setting up Event Server; TIP
- 70 - 5.7 Event Configuration Setting up Event Server Click the button and select Event Server to configure the SMTP server, so that you can send emails that include still images as notification. Select the Enable SMTP option to start the email service of the system. When you enable the service, yo...
Page 72 - Sending Email Notification
- 71 - Sending Email Notification Click the button and select Address Book to assign the user to the Address Book of the camera. The user will receive a real-time notification from the system while triggering out. 1. On the Address Book window, click New . 2. In the Address Book Information field, e...
Page 73 - Configuring Event Trigger; Event Trigger
- 72 - Configuring Event Trigger Click the button and select Event Trigger to configure the trigger out function of the camera. 1. On the Event Trigger window, select the desired camera from the Camera List. 2. Select one or all of the following: SMTP: Select this option and enter the Subject and Me...
Page 74 - Terminating Operation; When you have finished operating, click the; Logout; to log out the system or; Close; to exit the program.
- 73 - 5.8 Terminating Operation When you have finished operating, click the button and select Logout to log out the system or Close to exit the program.
Page 75 - Image Sensor
- 74 - C H AP T E R 6 A P P E N D I X A.1 Specification Image Sensor • Sensor Type: 1/4” Color CMOS • Sensor Resolution: 640 x 480 pixel • Minimum Illumination: 0.5 Lux Lens • Lens Type: Board Lens • View Angle (Diagonal): 64 degree Video • Image Compression: MPEG4/MJPEG • Exposure, White Balance, G...
Page 76 - A.2 GPIO Terminal Application; Connector Pin Assignment; PIN; Interface Schematic
- 75 - A.2 GPIO Terminal Application Typically used in association with programming scripts for developing applications for motion detection, event triggering, alarm notification via e-mail, and a variety of external control functions. The 6-pin I/O Terminal Block is located on the rear panel and pr...
Page 77 - A.3 Bandwidth Reference Guide; MJPEG; Resolution
- 76 - A.3 Bandwidth Reference Guide MPEG4 Bit rate (Kbit/s) Resolution Frame rate (fps) Lowest Low Normal High Highest QQVGA 30 128 128 128 128 128 QVGA 30 128 128 256 512 1024 VGA 30 128 256 512 1024 2048 MJPEG Image size (KB) Resolution Lowest Low Normal High highest QQVGA 1.5 1.9 2.4 2.7 4.1 QVG...
Page 78 - A.4 Glossary of Terms; NUMBERS
- 77 - A.4 Glossary of Terms NUMBERS 10BASE-T 10BASE-T is Ethernet over UTP Category III, IV, or V unshielded twisted-pair media. 100BASE-TX The two-pair twisted-media implementation of 100BASE-T is called 100BASE-TX. A ADPCM Adaptive Differential Pulse Code Modulation, a new technology improved fro...
Page 82 - Technical Support
- 81 - 1 2 3 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com * AICN1777W supports most of the mobile devices, but compatibility with every mobile device is not guaranteed. ** Monitoring multiple cameras simultaneously demands high performance c...
