AEG SKS51200S0- User Manual

Page 2 - Visit the webshop at:

FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best fr...

Page 3 - CONTENTS

CONTENTS 4 Safety information 6 Operation 7 Daily use 8 First use 8 Helpful hints and tips 8 Care and Cleaning 10 What to do if… 12 Technical data 12 Installation 18 Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and i...

Page 4 - manufacturer is not responsible for damages caused by omission.; Children and vulnerable people safety; children to suffer electric shock or to close themselves into it.; General safety; Keep ventilation openings clear of obstruction.

SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the applia...

Page 6 - Service; by a qualified electrician or competent person.; Environment Protection; OPERATION; Switching on; Insert the plug into the wall socket.; Switching off; The temperature is automatically regulated.; Operation

• Adequate air circulation should be around the appliance, lacking this leads to overheat - ing. To achieve sufficient ventilation follow the instructions relevant to installation. • Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compress...

Page 7 - defrosting and therefore reduced energy consumption.; DAILY USE; this appliance is sold in France.; Movable shelves; The walls of the refrigerator are equipped with a; Positioning the door shelves; Daily use

• the location of the appliance.If the ambient temperature is high or the appliance is fully loaded, and the appliance is set to the lowest temperatures, it may run continuously causing frost to form on the rear wall. In this case the dial must be set to a higher temperature to allow automatic defro...

Page 8 - FIRST USE; Cleaning the interior; HELPFUL HINTS AND TIPS; Hints for energy saving; For safety, store in this way only one or two days at the most.; CARE AND CLEANING; First use

FIRST USE Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accesso - ries with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.Do not use detergents or abrasive powders, as these...

Page 10 - Periods of non-operation; disconnect the appliance from electricity supply; WHAT TO DO IF...; What to do if...

Periods of non-operation When the appliance is not in use for long periods, take the following precautions:• disconnect the appliance from electricity supply • remove all food• defrost 4) and clean the appliance and all accessories • leave the door/doors ajar to prevent unpleasant smells. If the cab...

Page 11 - Replacing the lamp; Replace the used lamp with a new lamp; Closing the door

Problem Possible cause Solution Water flows on the rear plate of the refrigerator. During the automatic defrost - ing process, frost defrosts on the rear plate. This is correct. Water flows into the re - frigerator. The water outlet is clogged. Clean the water outlet. Products prevent that water flo...

Page 12 - Positioning; Electrical connection

TECHNICAL DATA Dimension of the recess Height 1225 mm Width 560 mm Depth 550 mm The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label. INSTALLATION Positioning WARNING! If you are discarding an old appliance that has a lock or c...

Page 13 - Ventilation requirements; The airflow behind the appliance must be suffi; Installing the appliance; Make sure that the mains cable can move freely.

1. Loosen and remove the upper pin.2. Remove the door.3. Remove the spacer. 4. With a key, loosen the lower pin. On the opposite side:1. Tighten the lower pin.2. Install the spacer.3. Install the door.4. Tighten the upper pin. Ventilation requirements The airflow behind the appliance must be suffi -...

Page 16 - of the kitchen furniture door.; Ha; Installation

7. Disconnect the parts (Ha), (Hb), (Hc) and (Hd). 8. Install the part (Ha) on the inner side of the kitchen furniture door. 9. Push the part (Hc) on the part (Ha). ca. 50 mm ca. 50 mm 21 mm 90° 90° 21 mm Ha Hc 16 Installation

Page 18 - • The door opens and closes correctly.; ENVIRONMENTAL CONCERNS; shop where you purchased the product.; Environmental concerns

13. Press the part (Hd) on the part (Hb). Do a final check to make sure that:• All screws are tightened.• The sealing strip is attached tightly to the cabinet. • The door opens and closes correctly. ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may ...

AEG SKS51200S0- User Manual

Table of Contents:

Summary

Other AEG Models