Page 2 - CONTENTS; PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION; FOR PERFECT RESULTS; spend a few minutes reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.
CONTENTS 1. SAFETY INFORMATION............................................................................................. 3 2. SAFETY INSTRUCTIONS.............................................................................................4 3. INSTALLATION.............................................
Page 4 - SAFETY INSTRUCTIONS; Installation
– staff kitchen areas in shops, offices and other working environments; – by clients in hotels, motels, bed & breakfast and other residential type environments; – areas for communal use in blocks of flats or in launderettes. • Do not exceed the maximum load of 7 kg (refer to the "Programme c...
Page 6 - INSTALLATION; Unpacking
Prewash such fabrics by hand before loading them into the washing machine. • Do not touch the glass door while a programme is in operation. The glass can get hot. 2.5 Service • To repair the appliance contact an Authorised Service Centre. • Use original spare parts only. 2.6 Disposal WARNING! Risk o...
Page 9 - Positioning and levelling; The inlet hose
3.2 Positioning and levelling • Install the appliance on a flat hard floor.• Make sure that air circulation around the appliance is not impeded by carpets, rugsetc. • Level the appliance by raising or lowering the feet. • The feet may be tight to adjust as they incorporate a self locking nut, but th...
Page 10 - Water drainage
• Connect the water inlet hose to the cold water tap with 3/4" thread. CAUTION! Make sure that there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. Contact the service centre for the replacement of the inlet hose. 3.4 Water drainage There are differ...
Page 11 - Building in
Drain hose end • If the end of the drain hose looks like this (see the picture), you can push it directlyinto the stand pipe. Without the plastic hose guide. To a sink spigot • Refer to the illustration. Put the drain hose in the spigot and tighten it with a clip. • Make sure that the drain hose mak...
Page 12 - Installing anti-tilting device; Preparation and assembly of the door
Installing anti-tilting device If the height of the counter is 820 mm or lower, you cannot install the anti- tilting device. Remove the screws of the top cover on therear of the appliance and install the anti-tilting device as shown in the drawing. ~10mm Adjust the anti-tilting device so that thedis...
Page 14 - PRODUCT DESCRIPTION; Appliance overview
A B C E D WARNING! Do not remove the screw B . If the door has to be opened from left toright, invert the position of the plates E , the magnet D and the plate C . Mount the counter-magnet D and the hinges A as previously described. 4. PRODUCT DESCRIPTION 4.1 Appliance overview 7 8 9 10 1 2 3 4 5 6 ...
Page 15 - Accessories; How to activate the child
4.2 Accessories 1 2 4 3 1 Spanner To remove the transit bolts. 2 Plastic caps To close the holes on the rear side of thecabinet after the removal of the transitbolts. 3 Inlet Hose To connect the appliance to the watertap. 4 Plastic hose guide To connect the drain hose on the edge ofa sink. 4.3 How t...
Page 16 - CONTROL PANEL; Control panel description; Display
5. CONTROL PANEL 5.1 Control panel description 1 10 9 8 7 6 2 3 5 4 AB C 1 10 9 8 7 6 2 3 5 4 AB C 1 Programme dial 2 Display 3 Delay start button (Delay start) 4 Phase indicators: • A - Washing phase (Washing) • B - Door lock (Door) • C - Extra rinse (Extra Rinse) 5 Start/Pause button (Start/Pause)...
Page 17 - Phase indicators
Duration of the selected programme • After setting a programme, the duration is displayed in hours and mi- nutes (for example ). • After the programme has started, the remaining time is updated every minute. Delay Start • When setting a delay start, the display shows the delay time (20 hours max.) f...
Page 18 - PROGRAMMES; Programme Chart
6. PROGRAMMES 6.1 Programme Chart ProgrammeTemperature range Maximum loadReference spinspeed Programme description(Type of load and soil level) Washing programmes Cottons95°C - Cold 7 kg1200 rpm (L 61271BI);1400 rpm (L 61470BI) White cotton and coloured cotton . Normal, heavy and light soil. Cottons...
Page 20 - CONSUMPTION VALUES
Programme options compatibility Programme Spin Stains 1) Extra Rinse Time Save 2) Cottons ■ ■ ■ ■ ■ Cottons + Prewash ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ Easy Iron ■ ■ ■ Delicates ■ ■ ■ ■ ■ Wool/Silk ■ ■ Sport Intensive ■ ■ ■ Spin ■ Drain Delicate Rinses ■ ■ ■ Jeans ■ ■ Refresh ■ Mix 20° ■ ■ ■ Cottons Eco ...
Page 21 - OPTIONS
Programmes Load (kg) Energy con-sumption(kWh) Water con-sumption (li-tre) Approxi-mate pro-gramme du-ration (mi-nutes) Remainingmoisture(%) 1) Cottons 60°C 7 1.35 67 150 53 2) / 52 3) Cottons 40°C 7 0.85 67 140 53 2) / 52 3) Synthetics40°C 3 0.55 42 90 35 2) / 35 3) Delicates30°C 3 0.55 63 65 35 2) ...
Page 22 - SETTINGS
8.2 Spin When you set a programme, the appliance automatically proposes a default spin speed. Press this button repeatedly to select the desired spin speed. The corresponding indicator illuminates. Additional spin option:Rinse Hold • If you select this option, the water of the last rinse is not drai...
Page 23 - Child Lock; BEFORE FIRST USE; Loading the laundry
until the phase indicator Extra Rinse illuminates/goes off . 9.3 Child Lock With this option you can ensure that should children touch the panel, the settings will not be altered.• To activate/deactivate this option, press the Stains button and the Extra Rinse button simultaneously until theindicato...
Page 26 - HINTS AND TIPS
12. HINTS AND TIPS WARNING! Refer to Safety chapters. 12.1 The laundry load • Divide the laundry into: white, coloured, synthetics, delicates and wool. • Follow the washing instructions on the laundry care labels. • Do not wash white and coloured items together. • Some coloured items can discolour w...
Page 27 - CARE AND CLEANING; External cleaning
hardness is soft it is not necessary to use a water softener.To find out the water hardness in your area, contact your local water authority. Use the correct quantity of water softener. Follow the instructions that you find on the packaging of the product. 13. CARE AND CLEANING WARNING! Refer to Saf...
Page 28 - Cleaning the drain filter
3. 4. MAX 13.6 Cleaning the drain filter The pump should be inspected regularly and particularly if: • The appliance does not empty and/or spin. • The appliance makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. • A problem with water drainage is...
Page 31 - TROUBLESHOOTING; Introduction; Possible failures
0° C, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water flow out of the hoses. 4. Select...
Page 33 - TECHNICAL DATA
After the check, activate the appliance. The programme continues from the point of interruption.If the problem occurs again, contact the Authorised Service Centre. If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Service. 15. TECHNI...
Page 36 - ENVIRONMENTAL CONCERNS
Airborne acoustical noise emission in db(A) spinning 74 Built in appliance Y/N Yes The information given in the chart above is compliant with the EU Commission regulation1015/2010 implementing directive 2009/125/EC . 17. ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging in...
