Page 2 - SERVICE; General information and tips; CONTENTS
SERVICE When contacting Service, ensure thatyou have the following data available.The information can be found on therating plate. ModelPNCSerial Number The following symbols are used in thisuser manual: Warning - Important Safety information. General information and tips Environmental information S...
Page 4 - SAFETY INFORMATION; CHILD SAFETY DEVICE
SAFETY INFORMATION Before the installation and use, readthis manual carefully:• For your safety and the safety of your property • To help the environment• For the correct operation of the ap- pliance. Always keep these instructions with theappliance also if you move or give it toa different person.T...
Page 5 - Permanent connection.; DISCARD THE APPLIANCE
internal components and cause leak-ages or malfunctions. • Do not install and connect a dam- aged appliance. • Make sure to remove all packaging and transport bolts. • Make sure that the mains plug is dis- connected from the mains socketduring installation. • Only a qualified person must do the elec...
Page 6 - ENVIRONMENT CONCERNS; PACKAGING MATERIALS
ENVIRONMENT CONCERNS PACKAGING MATERIALS Recycle the materials with the symbol . Put the packaging in applicable con-tainers to recycle it. ECOLOGICAL HINTS To help the environment, use less waterand energy, obey these instructions:• Set a programme without the pre- wash phase to wash laundry with n...
Page 7 - TECHNICAL INFORMATION
TECHNICAL INFORMATION Dimensions Width / Height / Depth 605 / 850 / 605 mm Total depth 640 mm Electrical connection: VoltageOverall powerFuseFrequency 230-240 V 2200 W 10 A 50 Hz Level of protection against ingress of solid particlesand moisture ensured by the protective cover, exceptwhere the low v...
Page 8 - Spanner
PRODUCT DESCRIPTION 1 2 3 8 9 5 6 7 4 10 11 12 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Drain pump 7 Feet for the appliance level 8 Water drain hose 9 Water inlet valve 10 Mains cable 11 Transit bolts 12 Feet for the appliance level ACCESSORIES 1 2 3 4 1 Spanner...
Page 9 - CONTROL PANEL; PROGRAMME KNOB
CONTROL PANEL Cottons+ PrewashExtra SilentSynthetics+ PrewashEasy IronDelicatesWool/Silk Economy 20 Min. - 3 kg Quick Intensive Jeans Curtains Super Eco Rinse Spin/Drain On/Off Temp. Spin Start/Pause Delay Start Time Save Stains Extra Rinse 1 2 3 4 5 6 7 8 9 10 1 On/Off button 2 Programme knob 3 Dis...
Page 10 - If the programme is completed but the symbol stays on:; DELAY START BUTTON
C • The display symbols. 2) Symbols Description Washing phase Rinse phases Spin phase Child lock You cannot open the appliance door when the symbol is on.You can open the door only when the symbol goes off. If the programme is completed but the symbol stays on: • There is water in the drum.• The 'Ri...
Page 12 - PROGRAMMES; Functions
PROGRAMMES ProgrammeTemperature Type of loadmax. weight of load Cycledescription Functions Cottons95° - Cold White and colouredcotton with normalsoil.max. 7 kg WashRinsesLong spin SPIN REDUCTIONRINSE HOLDSTAINEXTRA RINSETIME SAVE 1) Cottons + pre-wash95° - Cold White and colouredcotton with heavysoi...
Page 14 - CONSUMPTION VALUES; Programme
3) The default phase of the spin speed is related to cotton items. Set the spin speed. Make sure that it agrees with the laundry. 4) Set this function to add rinses. With a low spin speed the appliance performs delicate rinses and a short spin. 5) Set this programme to decrease the time and the cons...
Page 15 - Press button; LOADING THE LAUNDRY; Open the appliance door.
BEFORE FIRST USE 1. To activate the drain system, put 2litre of water in the main wash com-partment of the detergent dispens-er. 2. Put a small quantity of detergent inthe main wash compartment of the detergent dispenser. Set and starta programme for cotton at thehighest temperature without laun-dry...
Page 16 - FILLING THE DETERGENT AND ADDITIVES; This is the maximum level for the quantity of liquid additives.; Check the position of the flap
FILLING THE DETERGENT AND ADDITIVES The detergent compartment for the prewash phase and the soakprogramme.Add the detergent for prewash and soak before the start of theprogramme. The detergent compartment for the washing phase.If you use a liquid detergent, put it immediately before you startthe pro...
Page 17 - SETTING AND STARTING A PROGRAMME; INTERRUPT A PROGRAMME
3. To use powder detergent, turn theflap up. 4. To use liquid detergent, turn theflap down. With the flap in the positionDOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed inthe flap. – Do not set the prewash phase. – Do not set the d...
Page 18 - Steam; CANCEL THE DELAY START; AT THE END OF THE PROGRAMME
CHANGE A FUNCTION You can change only some functionsbefore they operate. 1. Press button 4 . The indicator flashes. 2. Change the function set. SET THE DELAY START 1. Press button 5 again and again until the display shows the numberof minutes or hours. The relatedsymbols comes on. 2. Press button 4 ...
Page 20 - HELPFUL HINTS AND TIPS; THE LAUNDRY LOAD
HELPFUL HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, col- oured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and col- oured items. • Some coloured items can discolour with the first wash. We reco...
Page 21 - Water hardness table
Water hardness table Level Type Water hardness °dH °T.H. mmol/l Clarke 1 soft 0-7 0-15 0-1.5 0-9 2 medium 8-14 16-25 1.6-2.5 10-16 3 hard 15-21 26-37 2.6-3.7 17-25 4 very hard > 21 > 37 >3.7 >25 ENGLISH 21
Page 22 - CARE AND CLEANING; DESCALING; gramme; DOOR SEAL; • Clean the drum with special product
CARE AND CLEANING WARNING! Disconnect the appliance from themains supply before you clean it. DESCALING The water we use contains limescale. Ifit becomes necessary, use a water soft-ener to remove limescales.Use a special product made for wash-ing machines. Obey the instructionsthat you find on the ...
Page 23 - DETERGENT DISPENSER; To clean the dispenser:; Pull the dispenser out.; DRAIN PUMP; • The display shows an alarm code be-
DETERGENT DISPENSER To clean the dispenser: 1 2 1. Press the lever. 2. Pull the dispenser out. 3. Remove the top part of the liquidadditive compartment. 4. Clean all the parts with water. 5. Clean the dispenser recess with abrush. 6. Put back the dispenser in the re-cess. DRAIN PUMP Regularly examin...
Page 24 - To clean the drain pump:; Open the drain pump door.
To clean the drain pump: 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess ofthe drain pump to collect the waterthat flows out. 4. Press the two levers and pull for-ward the drainage duct to let thewater flow out. 1 2 5. When the container is full of...
Page 25 - To clean the water inlet filters:; EMERGENCY DRAIN
1 2 9. Clean the filter under the water tapand put it back in the pump intothe special guides. 10. Make sure that you tighten correct-ly the filter to prevent leakages. 11. Put the flap back and close thedrain pump door. THE INLET HOSE FILTER ANDTHE VALVE FILTER It could be necessary to clean the fi...
Page 26 - FROST PRECAUTIONS; Remove the water inlet hose
When you drain the water with theemergency drain procedure, you mustactivate again the drain system: 1. Put 2 litres of water in the mainwash compartment of the deter-gent dispenser. 2. Start the programme to drain thewater. FROST PRECAUTIONS If the appliance is installed in an areawhere the tempera...
Page 27 - TROUBLESHOOTING
TROUBLESHOOTING The start of the appliance does not oc-cur or it stops during operation.First try to find a solution to the prob-lem (refer to the table). If not, contactthe service centre. With some problems, the acousticsignals operate and the displayshows an alarm code: • - The appliance does not...
Page 30 - INSTALLATION; UNPACKING; Remove the cardboard top.
INSTALLATION UNPACKING 1. Use the gloves. Remove the exter-nal film. If necessary, use a cutter. 2. Remove the cardboard top. 3. Remove the polystyrene packagingmaterials. 4. Remove the internal film. 5. Open the door. Remove the poly-styrene piece from the door sealand all the items from the drum. ...
Page 31 - Pull out the plastic spacers.
6. Put the front piece on the floor be-hind the appliance. Carefully putdown the appliance with the rearside on it. Make sure not to dam-age the hoses. 1 2 7. Remove the polystyrene protectionfrom the bottom. 8. Pull up the appliance in vertical po-sition. 9. Remove the power supply cableand the dra...
Page 32 - POSITIONING AND LEVELLING
12. Replace the plastic spacers withthe plastic caps. You can find thesecaps in the user manual bag. WARNING! Remove all the packaging andthe transit bolts before you in-stall the appliance. We recommend that you keepthe packaging and the transitbolts for when you move the ap-pliance. POSITIONING AN...
Page 33 - • Connect the hose to the appliance.; Water pressure
Installation on a not hard floor When you install the appliance on a nothard floor (wooden planks floor), put arigid support plinth under the appli-ance feet to prevent the noise and thevibration.Assemble the plinth with a waterproofwood panel (min. 15 mm thick) and at- tach it to the beams of the f...
Page 34 - WATER DRAINAGE; With the plastic hose guide.
Water-stop device A The inlet hose has a water stop device.This device prevents water leaks in thehose because of its natural ageing. Thered sector in the window «A» shows thisfault .If this occur, close the water tap andcontact the service centre to replacethe hose. WATER DRAINAGE There are differe...
Page 35 - • If the end of the drain hose is this; Without the plastic hose guide.; • To a sink spigot.
• If the end of the drain hose is this (see the drawing), you can push it di-rectly into the stand pipe. Without the plastic hose guide. • To a sink spigot. Refer to the illustration. Put the drainhose in the spigot and tighten it witha clip. Make sure that the drain hosemakes a loop to prevent that...
