Adam Equipment shs series - Manual

Page 2 - WARRANTY

1 © Adam Equipment Company 2012 1.0 CONTENTS 1.0 CONTENTS ......................................................................................... 1 2.1 INTRODUCTION .............................................................................. 2 2.2 TECHNICAL SPECIFICATIONS...........................

Page 3 - INTRODUCTION

2 © Adam Equipment Company 2012 2.0 INTRODUCTION 2.1 INTRODUCTION The SHS Series is a range of heavy-duty lower capacity crane scales The main features include: • Easy Operation & Rugged construction • 15mm bright red LED display enabling a good viewing angle. • 360 degree rotary safety hook and...

Page 4 - TECHNICAL; Capacity

3 © Adam Equipment Company 2012 2.2 TECHNICAL SPECIFICATIONS Model No. Capacity Division SHS-50 50kg 0.01kg SHS-150 150kg 0.02kg SHS-300 300kg 0.05kg

Page 5 - SAFETY

4 © Adam Equipment Company 2012 2.3 SAFETY NOTICE The limit stated below is the Ultimate Overload Limits of the scales. Adam Equipment Co. Ltd. Its directors, owners and affiliated companies and organisations cannot be held liable for any resulting damage or injury sustained as a result of the machi...

Page 6 - Kg lb N

5 © Adam Equipment Company 2012 2.4 KEY AND PANEL DESCRIPTION [ON/OFF] The power switch is located on the rear housing. Use this key to turn the scale ON and OFF. [ZERO] Press the [ZERO] key to return the reading to zero. [UNIT] Press the [UNIT] key to change the weighing unit being displayed. Kg, L...

Page 8 - BATTERY

7 © Adam Equipment Company 2012 3.2 BATTERY OPERATION • The lithium battery will operate continuously for 20 hours before requiring recharging. The scale will alert you that the battery is low on charge when the Indicator LED above the battery symbol lights up. • To charge the battery, unclip the ba...

Page 9 - BASIC

8 © Adam Equipment Company 2012 3.3 BASIC OPERATIONS Power on and off Press the [ON/OFF] button to turn the scale on or off. The display on the scale will show the model capacity then countdown from 9 to 0 before displaying ZERO weight. Zero the scale Press the [Zero] key so that the display shows z...

Page 10 - REMOTE

9 © Adam Equipment Company 2012 3.4 REMOTE CONTROL UNIT The remote control works via infra red and can be used to operate the SHS from long distances. It operates using 2 x AAA batteries and these can be exchanged by unclipping a cover on the rear of the remote control unit. 3.5 USER PARAMETERS Thre...

Page 11 - ‘HOLD’

10 © Adam Equipment Company 2012 4.0 CALIBRATION • Press the [ZERO] key and power up the scale using the on/off button. • Release the [ZERO] key and the display will show “SPAN”. Make sure the hook is empty unless you intend to use any chains, slings etc to hold the calibration mass. Add any items s...

Page 12 - PARTS LIST; SHS; Part number

11 © Adam Equipment Company 2012 5.0 PARTS LIST SHS Part number Description Item No 7.00.1.0.0286 SHS SUPPORT RING 1 7.00.4.0.0091 SHS ON/OFF PUSHBUTTON 2 7.00.4.0.0092 SHS LITHIUM BATTERY PACK - 2 PIECES 3 7.00.4.0.0095 SHS POWER CONNECTOR SOCKET 4 7.00.4.0.0011 SHS COMPLETE HOUSING 5, 6, 7, 8 7.00...

Page 15 - Manufacturer’s Declaration of Conformity

© Adam Equipment Company 2012 Manufacturer’s Declaration of Conformity This product has been manufactured in accordance with the harmonised European standards, following the provisions of the below stated directives: Electro Magnetic Compatibility Directive 2004/108/EC Low Voltage Directive 2006/95/...

Adam Equipment shs series - Manual

Table of Contents:

Summary

Other Adam Equipment Models