Adam Equipment P.N.304666011 - Manual
Adam Equipment P.N.304666011 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – AVT Assembly Instructions; Lower packing Middle packing Top packing
- Page 4 – Outer Frame Assembly
- Page 6 – Figure 9: Final assembly drawing
- Page 8 – ADAM EQUIPMENT; is an ISO 9001:2000 certified global company with more than
Adam Equipment
Anti-Vibration Table
(P.N.304666011 – Rev B July 2010)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 AVT Assembly Instructions 1. Inner Frame Assembly: Step One: Open the packing box, take out the top, middle, lower packing assemblies and the accessory bags, See Figure 1. Inner side rail (right) Marble supporting assembly Inner side rail (left) Supporting rail (lower) Lower packing Middle packing...
3 1 x Marble support rails 1 x Inner side rails (left) 1 x Inner side rails (right) 4 x rubbers 1 x Supporting rail (lower) Six M8 x 40 socket screws Figure 2: Figure 3: Inner frame assembly Assembled inner frame Figure 4: Figure 5: Correct position of the marble Assembled inner frame with marble 2....
5 3. Final Assembly Place the outer frame over the inner frame and adjust the feet for the outer and inner frames so that they are level. Adjust the marble rubbers to ensure the marble is 2-5mm higher than the table top and that it is firmly positioned. Please see Figure 9. Figure 9: Final assembly ...
