Adam Equipment MUW 300L - Manual

Page 2 - CONTENTS

2 © Adam Equipment Company 2012 CONTENTS CONTENTS ......................................................................................................................... 2 1.0 INTRODUCTION....................................................................................................... 3 2.0 ...

Page 3 - INTRODUCTION; RS232 communication port, either manually or automatically.; SET; assemble, please follow the instructions as below.

3 © Adam Equipment Company 2012 1.0 INTRODUCTION The MUW Health and Fitness scale provides the weight and height of a patient before calculating the BMI based on the results. Each result will be displayed on the Indicator and held until the result is cleared, the BMI result can be used to help evalu...

Page 4 - wall once you have selected the position the MUW will be used in.; LOCATING

4 © Adam Equipment Company 2012 The MUW comes with 4 x wall fixing brackets that can be secured to the pillar before fixing to the wall. If the wall fixing brackets are being used attach these when you fix the M4 x 10 screws to the pillar fixing inserts. Fasten securely to the wall once you have sel...

Page 5 - KEYPAD

5 © Adam Equipment Company 2012 4.0 KEYPAD / DISPLAY FUNCTION The keypad and display have a number of features as shown and explained below: Charging LED Battery Symbol Zero Indicator Stable Indicator Tare Symbol Ultrasonic Sensor Symbol

Page 6 - REAR; KEYS

6 © Adam Equipment Company 2012 4.1 REAR PANEL The rear panel has a connector input for the external power adaptor (12 volts DC @800ma). 4.2 INTERNAL RECHARGEABLE BATTERY The scale can be operated from the internal rechargeable battery or using an adapter. The battery life is approximately 24 hours ...

Page 7 - BASIC

7 © Adam Equipment Company 2012 5.0 BASIC OPERATION 5.1 SWITCHING THE BALANCE ON Plug in the unit using the adapter or use the internal rechargeable battery. It is recommended that you charge the battery for at least 8 hours before first use. 1) To turn on press the [On/Off] key once and release. Th...

Page 10 - PARAMETERS; FUNCTION; SETTING

10 © Adam Equipment Company 2012 6.0 PARAMETERS The balance has 8 parameters where options can be set by the user. FUNCTION SECTION DESCRIPTION F1 F1 F1 F1 EL EL EL EL See section 6.1 Sets the backlight operation Default is AUTO F2 F2 F2 F2 OFF OFF OFF OFF See section 6.2 Auto off function Default i...

Page 12 - PRINTING; SEEEELLLL; DiSP 1

12 © Adam Equipment Company 2012 5) Press the [Print] key to change the setting for the printing control and press [Zero] to save. 6) The current setting for data transmission speed “Bps” will now be displayed. 600, 1200, 2400, 4800, 9600 are available. Default is 9600. Press the [Print] key to chan...

Page 14 - PARAMETER DESCRIPTION; FILT

14 © Adam Equipment Company 2012 6.7 SETTING DATE AND TIME F7 F7 F7 F7 D D D D ---- T T T T 1) Switch on the scale then press the [kg/lb] key during the self-checking test of the display. 2) The display will show the first function F1 F1 F1 F1 EL EL EL EL .. 3) Press the [kg/lb] key to select F7 F7 ...

Page 15 - TECHNICAL; USER

15 © Adam Equipment Company 2012 1) Switch on the scale then press the [kg/lb] key during the self-checking test of the display. 2) The display will show the first function F1 F1 F1 F1 EL. EL. EL. EL. 3) Press the [kg/lb] key to select FFFF8 8 8 8 SET SET SET SET UP UP UP UP and then [Zero] to enter...

Page 16 - SERIAL; The balance comes equipped with an RS-232 Serial Interface.; TROUBLE; Height: 183 cm

16 © Adam Equipment Company 2012 8.0 SERIAL INTERFACE SPECIFICATIONS The balance comes equipped with an RS-232 Serial Interface. The connector is a DE-9P female fitting with the following connections. Pin 2 TXD Transmitted data Pin 3 RXD Received data Pin 5 GND Signal ground Printing Output: The lin...

Page 17 - ERROR; DISPLAYED MESSAGE; Err

17 © Adam Equipment Company 2012 9.1 ERROR MESSAGES If an error message is shown, repeat the step that caused the message. If the error message is still shown then contact your dealer for support. DISPLAYED MESSAGE DESCRIPTION Err Measured height is above 210cm/82.5 inches UNDER Measured height is b...

Page 18 - WARRANTY

18 © Adam Equipment Company 2012 11.0 WARRANTY INFORMATION Adam Equipment offers Limited Warranty (Parts and Labour) for the components failed due to defects in materials or workmanship. Warranty starts from the date of delivery. During the warranty period, should any repairs be necessary, the purch...

Adam Equipment MUW 300L - Manual

Table of Contents:

Summary

Other Adam Equipment Models