Adam Equipment mdw-160m - Manual
Adam Equipment mdw-160m – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – CONTENTS; GENERAL
- Page 6 – INSTALLATION; no. M6 Lock washers
- Page 7 – If the column bracket is bent, straighten it before assembling.; of the Draft rod
- Page 8 – HEIGHT ROD INSTALLATION; Latch to lock/unlock the; HEIGHT; Preparing the scale to measure the height-
- Page 9 – Read the height of the person as follows:
- Page 10 – OPERATION; To do the zero setting; For accurate weighing, place the scale on a levelled floor.
- Page 11 – To weigh a person
- Page 12 – ADAM EQUIPMENT; is an ISO 9001:2000 certified global organisation with more; ADAM; prior permission of Adam Equipment.
Adam Equipment
MDW-160M
MECHANICAL PHYSICIAN SCALE
(P.N. 4283, Revision B2, December 2006)
© Adam Equipment Company 2006
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
© Adam Equipment Company 2006 CONTENTS 1. INTRODUCTION................................................................................................. 3 2. SPECIFICATIONS .............................................................................................. 3 3. INSTALLATION...................
3. INSTALLATION 3.1 GENERAL INSTALLATION This precision instrument is extremely easy to set up, as all major parts are factory pre-assembled. Hardware supplied for installation: − 6 no. M6 x 12 screws − 6 no. M6 Lock washers − 2 no. Hex Head screws − Tool (Spanner/Wrench) 1. Column with head 2. Heig...
NOTE: If the column bracket is bent, straighten it before assembling. Slip the column over the column bracket on the base. Hold the column straight so that the draft rod fits into the opening aperture of the column bracket. Fix the column to the column bracket using two M6 screws in front of the col...
