3M 700 Series - Manual

Training your staff What to do when the alarm sounds The following steps are suggested procedures only. We recommend that all staff develop a complete understanding of thelibrary’s policies and follow them as directed. The response should be consistent for all patrons caught in an alarm. It is alsoi...

Training your staff Detection system alarm log Alarm Date Time Patron Count Reported By *Alarm Reason (1, … 5) $ Value of Recovered Materials Description of Recovered Materials *Alarm reason: 1. Test 2. Upon entering 3. Failure to un-secure 4. Undetermined 5. Real alarm ©2008. 3M. All rights reserve...

How the System Works Your 3M Detection System consists of several components, which include security strips, circulation accessories, andthe detection system. The key to the effectiveness of your system is protecting your materials with security strips. Only when materials are protectedcan your dete...

System Configurations The 3M Detection System Model 700 series consists of 2 models; 701 and 702. The following illustration shows the buriedcable mounting option. Other mounting options include direct mounting with the connecting cables routed under either anarrow threshold or a wide baseplate. Fig...

System Configurations Power requirements A dedicated power line is recommended but not required. Voltage 100/120 VAC 50 or 60 Hz 220/240 VAC 50 or 60 Hz Amperes 1.8 A @ 100/120 VAC 1.0 A @ 220/240 VAC WARNING To reduce the risks associated with hazardous voltage: • Do not use the product if the case...

Cleaning Instructions Lattice and base Turn off the detection system prior to using liquid cleaners. Use towels or soft cloths dampened with a common householdgrease-cutting liquid cleaner that is compatible with plastic to remove dirt and greasy buildup. Clean monthly to retain thebest equipment ap...

System Operation Turning the System On Follow these steps to turn the system on: 1. Ensure that the power cord is connected to a power outlet. 2. Allow 15 seconds for the system to warm up. Turning the System Off Remove power from the system by one of the following methods: • Disconnect the AC power...

Solving problems Problem Cause Action No power at receptacle. Reset facility circuit breaker. Power cord disconnected at receptacle. Plug power cord into receptacle. System fuse open. Replace fuse in the electronics enclosure.See fuse replacement procedure. No alarm, no green powerindicator on the e...

Solving problems 3M Service phone numbers For questions regarding your system, call one of the following numbers. In the United States In Canada In other countries 1-800-328-0067 English 1-800-268-6235Français 1-800-567-3193 Call your local 3M office. 16 Copyright © 2008. 3M. All rights reserved.

Warranty Effective 12-12-05 One Year Library Systems Product Performance Guarantee: Subject to the Limitation of Liability below, 3M guarantees your satisfaction with the performance of any 3M Library System Product for 12 months from the date of installation provided thata) you are the original pur...