3M 955 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1
2
3
4
5
6
7
8
9
Table of Contents:
Page 2 – Index of Contents
Page 3 – Components; Optical sensor
Page 4 – Designated Application; Designated; The following security markers can be used:; Sensitise / Desensitise; media
Page 5 – Safety
Page 6 – Operation
Page 7 – Verification
Page 8 – Troubleshooting; Malfunction Possible; The optical sensor is dirty.; incorrect
Page 9 – Technical Data; Technical; Sensitising and
Loading the manual
Operators Manual
Book check unit
3M Model 955
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 - Index of Contents
Index of Contents 1 Components ..................................................................................................................... 1-1 2 Designated application .................................................................................................... 2-1 2.1 Compatible me...
Page 4 - Designated Application; Designated; The following security markers can be used:; Sensitise / Desensitise; media
Designated Application 2 Designated application 2.1 Compatible media BEATLES buch cd The Model 955 has been designed for sensitising and desensitising printed media and compact discs only. The following security markers can be used: Sensitise / Desensitise - Books: DS-B1-N/B1 DS-B2-N/B2 DS-B0 - Comp...
Page 5 - Safety
Safety 3 Safety In order to be able to use the Model 955 without any problems, kindly observe the section titled General Safety, and take note of any product specific safety instructions in this section. The Model 955 does not have an on/off-switch of its own. The power socket should be easily acces...
Page 6 - Operation
Operation 4 Operation Switch the sensitise/desensitise switch to the required operating mode. rat or's Ma nua l Sensitize Desensitize Op e Slide the book through the Model 955 as illustrated adjacent. The light beam from the optical sensor will be interrupted. An audible sensitise/desensitise pulse ...
Page 7 - Verification
Operation 4.1 Verification The "Verify" function can be used to check whether a security strip has been sensitised or not. Place the book in the Model 955 as illustrated adjacent. Make sure that the light beam from the optical sensor is not interrupted. The lamp in the "verify" butto...
Page 8 - Troubleshooting; Malfunction Possible; The optical sensor is dirty.; incorrect
Troubleshooting 5 Troubleshooting Malfunction Possible causes Remedy The sensitising / desensitising pulse is not triggered. The optical sensor is dirty. Clean the optical sensor with suitable materials (e.g. cotton wool buds). The security marker is not activated / deactivated although the sensitis...
Page 9 - Technical Data; Technical; Sensitising and
Technical Data 6 Technical Data Design: Table-top model Application: Sensitising and desensitising of 3M Security Strips Method of re/desensitizing: Electromagnetic pulse Sensitising and de-sensitising time: Less than 0.1 seconds Surrounding requirements: Recommended operating temperature 10 °C to 3...