Page 2 - NOTES
Page 2 of 24 802698 - G4 User Guide - 09.16 - v2.02 NOTES
Page 3 - Tap operation - Chilled Sparkling; Rotate for Sparkling water; To dispense Sparkling water:; Model CSHA; To dispense Chilled water:; Rotate for Chilled water; Tap operation - Chilled water
802698 - G4 User Guide - 09.16 - v2.02 Page 3 of 24 Tap operation - Chilled Sparkling Turning the rotary control allows the dispensing of either Chilled Sparkling or Chilled water. For your convenience, the rotary control is spring loaded, so when released, will return automatically to the OFF posit...
Page 4 - Rotate for Boiling water; To dispense Boiling water:; with the safety OFF.; Vent
Page 4 of 24 802698 - G4 User Guide - 09.16 - v2.02 Tap operation - Mixer The Mixer tap lever is operated as a conventional ‘Flick Mixer’. The hot side is marked with a red stripe and the cold side with a blue stripe, for dispensing cold to warm water. Lifting the handle up will decrease the flow ra...
Page 5 - Filter Warning and Reset; Filter Warning Light:; Safety light; Fault Warning Lights:; Sleep mode
802698 - G4 User Guide - 09.16 - v2.02 Page 5 of 24 Filter Warning and Reset Filter Warning Light: As a reminder that the filter requires changing, the warning light will flash quickly every 10 secs. (See section on filter maintenance.) Filter Reset: The warning light will need to be reset after the...
Page 6 - LCD Screen; BHA window
Page 6 of 24 802698 - G4 User Guide - 09.16 - v2.02 The Zip HydroTap G4 Celsius introduces a ‘TOUCH’ screen for easy setup and operation adjustment. Other possible messages in status window: Status** Information Notes System Fault Product has one or more system faults Refer to section B Change Filte...
Page 7 - LCD Screen Menu; Main Menu
802698 - G4 User Guide - 09.16 - v2.02 Page 7 of 24 3 LCD Screen Menu Main Menu Sub Menu Sub Menu Options Section Language • English• German A • Product Info• System Faults• Event Log • Product serial no.• Lists B Information Installation • Filter Flush• Filter Reset • Reset options• Calibration opt...
Page 8 - Select the preferred language
Page 8 of 24 802698 - G4 User Guide - 09.16 - v2.02 A Set Language B System Information In this section, you can find your product serial number , check system fault messages or view the event logs of your product. LCD Screen operation - Section A LCD Screen operation - Section B 1. Press [Product I...
Page 9 - CHA Screen
802698 - G4 User Guide - 09.16 - v2.02 Page 9 of 24 C Install Once your Zip HydroTap G4 unit has been installed, Go to Install menu to configure the system settings for your product. Sub menu: 1. Filter Flush 2. Filter Reset 3. Boiling Calibration 4. Booster 5. Lux Sensor Calibration LCD Screen oper...
Page 10 - LCD Screen operation - Section C
Page 10 of 24 802698 - G4 User Guide - 09.16 - v2.02 Have a 10L bucket or similar container (not supplied) at the ready to hold a quantity of water that will be ejected while the Filter Flush Mode is in operation. Open the filter access door on the front of the HydroTap and the filter cartridge will...
Page 12 - Caution; D Service; To set a password; LCD Screen operation - Section E
Page 12 of 24 802698 - G4 User Guide - 09.16 - v2.02 Caution must be observed when changing any settings within the Service Menu as any changes may affect the normal operation of the unit. This can only be done by a Zip technician. Please contact your Zip service provider for further assistance. 1. ...
Page 13 - To change a password; Enter your old 4 digit password; F Communication; Not yet available; Settings; g I; nstructions; LCD Screen operation - Section F
802698 - G4 User Guide - 09.16 - v2.02 Page 13 of 24 To change a password 1. Press the [MENU] button for main menu. 2. Press the [Security] button. 3. Press [Change Password} 4. Enter your old 4 digit password 5. Then enter your new 4 digit password. You will need to enter your password to access th...
Page 14 - LCD Screen operation - Section G; ions; Set Temperature; date
Page 14 of 24 802698 - G4 User Guide - 09.16 - v2.02 3. LCD Screen operation - Section G t ions 1. Press the [MENU] button for main menu. 2. Press the [Temperature] button. 3. To adjust the temperature, press the relevant temperature button and then use the up and down arrows. 4. Press [HOME] to ret...
Page 15 - To edit the filter life:; Filter Life increases in 500; Filter; To edit the filter usage:; The filter life may be set as a
802698 - G4 User Guide - 09.16 - v2.02 Page 15 of 24 To edit the filter life: 1. Press the [MENU] button for main menu. 2. Press the [Setting] button. 3. Press the [Filter] button. 4. Press the [Filter Life] button, for Internal or External filter. 5. To change filter life, first select filter life ...
Page 17 - the user may turn the unit ON or OFF at specific times; Individual set screen; Any attempt, during OFF mode, to dispense water, will bring the unit; Press Group 1 or Group 2 option
802698 - G4 User Guide - 09.16 - v2.02 Page 17 of 24 To activate ON/OFF mode: 1. Press the [MENU] button for main menu. 2. Press the [Setting] button. 3. If required, Enter your 4 digit password 4. Press the [Energy Modes] button. 5. Select ‘Individual set’ if you wish to allocate a specific time fo...
Page 18 - Dispense Times; To edit the dispensing times:; taps; Safety; When Disabled, boiling water may be dispensed from the Hydrotap
Page 18 of 24 802698 - G4 User Guide - 09.16 - v2.02 Dispense Times (All) The ability to change the maximum dispensing time for both the Hot and Chilled water has been introduced. The default settings for the maximum dispensing times is 15 seconds. Here, the operator may change both the Hot and Chil...
Page 19 - Gas bottle change
802698 - G4 User Guide - 09.16 - v2.02 Page 19 of 24 1. Turn the CO 2 bottle regulator OFF (Anti-clockwise). The knob will screw up and away from the bottle. 2. Dispense sparkling water for 30 seconds, until the water flow is free of gas. 3. Remove the bottle from the cupboard and disconnect the reg...
Page 20 - Open the door of the under sink unit.
Page 20 of 24 802698 - G4 User Guide - 09.16 - v2.02 Filter Maintenance To change the Filter: (See also Section C) 1. Open the door of the under sink unit. 2. Relieve system pressure via the filter flush stop cock, a quick open and close will do. Use the bucket to catch the discharge. 3. Grasp filte...
Page 21 - Avoid using air bourne pesticides near the undersink unit.; Air Inlet Filter; For best performance the unit should only be operated with a clean; Filter Maintenance; If the Zip HydroTap is switched off for a long period of time
802698 - G4 User Guide - 09.16 - v2.02 Page 21 of 24 Cleaning General cleaning Do not use strong, corrosive, spray or abrasive cleaners. Clean with a soft damp cloth and mild soap. Under sink units must never be located near, or cleaned with water jets. Avoid using air bourne pesticides near the und...
Page 22 - Home Menu Icons; °C but may; BOILING
Page 22 of 24 802698 - G4 User Guide - 09.16 - v2.02 Home Menu Icons Safety switch is LOCKED. The HydroTap will not dispense any Boiling water.See page 18 for safety switch operation Safety switch is UNLOCKED. Boiling water may be dispensed. See page 4 for tap operation details Sleep mode is active....
Page 24 - Head Office; Contact Details
Page 24 of 24 802698 - G4 User Guide - 09.16 - v2.02 The terms “Zip” and “Celsius” are registered trade marks of Zip Heaters (Aust) Pty Ltd. Zip products described in this publication are manufactured under one or more of the following patents: AU675601, AU637412, AU635979, GB0422305, GB2065848, US4...