Zip CT1002-1 - User Manual
Zip CT1002-1 Faucet – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – WARNINGS AND PRECAUTIONS; The appliance must be placed in an upright position.; Before installation
- Page 5 – Tap Installation; In addition to common tools, the following will be required:; Position the Tap; the length of the supplied tubing.; Installation instructions
- Page 6 – Clearance; Ventilation; Jigsaw and 12 mm drill.; Ventilation Requirements
- Page 7 – Additional ventilation; Ensure that A and B are positioned at opposite; Vent tray
- Page 8 – Chiller Installation; The tubing length is limited to 1000 mm.; Mains Water Connection; If caps are removed to allow lifting handles; Water Connection
- Page 9 – ChillTap Extra; Commissioning
- Page 10 – Operation & Maintenance; Operation; ROTATE; Water Filter; Air Inlet Screen; Slide to remove
- Page 12 – Head Office; Postal: Locked Bag 80
1
806143 - CW ChillTap UCCT 10.18 v1.03
Installation instructions & user manual
Zip
ChillTap
Filtered, chilled water on tap.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
03 806143 - CW ChillTap UCCT 10.18 v1.03 WARNINGS AND PRECAUTIONS A. Read the instructions.B. Note: All fittings are supplied with the appliance kit except an isolation valve.C. Check the water quality to determine if extra filtration will be required.D. Check the appliance rating plate and ensure c...
05 806143 - CW ChillTap UCCT 10.18 v1.03 Tap Installation In addition to common tools, the following will be required: • 25mm (ChillTap Standard/Heavy Duty) OR 35mm (ChillTap Extra) diameter sheet metal hole punch for sink tops (not supplied) • 25mm (ChillTap Standard/Heavy Duty) OR 35mm (ChillTap E...
06 806143 - CW ChillTap UCCT 10.18 v1.03 Installation instructions Clearance Envelope Ventilation When installing air flow ducts, the following tools will be required: • Jigsaw and 12 mm drill. • Keyhole or Wall Board saw. Ventilation Requirements IMPORTANT! Allow clearance of 50 mm around and 200 m...
