Page 2 - Tap options
Page 2 of 16 802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Tap options Arc / Cube Tap Celsius Arc / Cube Tap Classic Tap Elite Tap The HydroTap appliance series offers a range of interchangeable taps to suit the customer’s needs (See options below). For ease of installat...
Page 3 - Index
802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Page 3 of 16 Index HydroTap Specifications Installation check list .................................................................................................................... 4General Product Features ..................
Page 4 - Before Commissioning:; Installation checklist
Page 4 of 16 802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Before Installation: A. Read the instructions and check if there is adequate space to mount all of the components. B. Note: Not all fittings are supplied with the appliance kit. Isolation valves are not supplied....
Page 5 - What is the Zip HydroTap ?; General Product Features
802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Page 5 of 16 Thank you for purchasing a Zip Chilled HydroTap. Please read and follow these instructions carefully to ensure safe operation and trouble free service. If service is required, please call 1800 460 222 What is the...
Page 6 - WARNINGS; Important Safety Instructions; Qualifications
Page 6 of 16 802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 WARNINGS 1. The Zip HydroTap unit must be earthed. The resistance of the earth connection from each exposed metal part must be less than 1 ohm. 2. All Installation and service work must be completed by trained an...
Page 7 - Major components and accessories; Parts supplied; Accessories
802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Page 7 of 16 Major components and accessories Parts supplied Description HydroTaps with hoses. (Classic tap shown) 1 off HydroTap Undersink Unit with water filter 1 off Mains water connection hose 1 x Inlet vent 1 x Outlet ve...
Page 8 - Technical Specifications; Product covered by these instruction:; Section 1
Page 8 of 16 802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Before installing ensure that the following have been provided at the installation site: • Review all the technical specifications. • Ensure the underbench can support the product weight when full of water, (allo...
Page 9 - Section 2
802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Page 9 of 16 2.1 Ventilation for All Models Proper air circulation must be provided for all Boiling and Chilled models. The system will operate correctly only if the recommended air gaps are achieved during Installation. The ...
Page 10 - Ventilation; Airflow through the cupboard
Page 10 of 16 802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Typical Cut out procedure 1. Mark out and cut the air inlet and door outlet holes as shown 2. Ensure the air inlet vent and air outlet vent are positioned at opposite ends of the same cupboard space. 3. Fit the ...
Page 11 - Section 3; Hose and tube fitting.; HydroTap
802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Page 11 of 16 Note: The tube lengths are matched to the pumps performance and therefore CANNOT be lengthened POWER CORD USB CHILLED OUTLET MAINS IN Note: All silicon tubes must be cut to size. They must have a constant fall b...
Page 12 - Installation
Page 12 of 16 802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 POWER CORD USB CHILLED OUTLET MAINS IN Note: All silicon tubes must be cut to size. They must have a constant fall back to the unit. BLUE BRAIDED Note: - Mains hose length is 750mm- Plug and Cord length is 1800m...
Page 13 - Filter Flush
802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Page 13 of 16 Section 4 Commissioning • Turn the power ON at the GPO and at the side of the undersink unit • Turn ON the water and check for any leaks. • At first commissioning, the screen will prompt you to select a language...
Page 14 - Trouble Shooting; System Fault
Page 14 of 16 802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Trouble Shooting NOTE: For any subsequent fi lter changes or any operational procedures, please refer to the HydroTap user guide, located inside the fi lter housing access door. System Fault Message Possible Cause...
Page 15 - End of Life Disposal
802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Page 15 of 16 In order to help preserve our environment we ask that you dispose of this product correctly. Please contact your local city council for collection centre details. End of Life Disposal
Page 16 - Contact Details; Head Office
Page 16 of 16 802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00 Contact Details The standard glass is 200 ml (7 fl oz). The terms “Zip” and “HydroTap” are registered trade marks of Zip Heaters (Aust) Pty Ltd. Zip products described in this publication are manufactured under ...