Zanussi ZWF81240W User Manual - Free PDF Download

Page 3 - SAFETY INSTRUCTIONS

• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not use water spray and steam to...

Page 4 - PRODUCT DESCRIPTION

SERVICE• To repair the appliance contact an Authorised Service Centre. • Use original spare parts only. DISPOSAL WARNING! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. • Remove the door catch to prevent children and pets to...

Page 5 - EASY START

EASY START CONTROL PANEL DESCRIPTION 90° 60° 40° 30° Start/Pause 3h 6h 9h Delay Start Temp Spin Quick Cotton Cotton ECO Synthetics Delicates Wool/Handwash Jeans Rinse Spin Refresh 20min Duvets Drain Easy Iron Mix 20° 2 3 5 4 6 7 1 1 Programme knob 2 Delay Start button (Delay Start) 3 Indicators 4 St...

Page 6 - PROGRAMME CHART

PROGRAMME CHART Programme Temperature range Programme description (Type of load and soil level) Maximum load Maximum spin speed Cotton 90°C - Cold White cotton and coloured cotton. Normal soil and light soil. 8 kg 1200 rpm for model ZWF81240W; 1400 rpm for model ZWF81440W Cotton Eco 1) 60°C - 40°C W...

Page 8 - CONSUMPTION VALUES

Programme Quick 1) Delay Start Spin ■ ■ Easy Iron ■ ■ ■ ■ Refresh 20min ■ ■ Duvets ■ ■ Jeans ■ ■ ■ 30'@ 30° ■ ■ 1) When you set this option, we recommend that you decrease the quantity of the laundry. It is possible to keep the full load but the washing results can be unsatisfactory. Recommended loa...

Page 9 - OPTIONS

Programmes Load (kg) Energy con- sumption (kWh) Water con- sumption (litre) Approximate programme du- ration (mi- nutes) Remaining moisture (%) 1) Standard 60 °C cotton 4 0,73 40 210 53 2) / 52 3) Standard 40 °C cotton 4 0,62 41 196 53 2) / 52 3) 1) At the end of spin phase. 2) For model ZWF81240W. ...

Page 10 - DAILY USE

SETTINGS PERMANENT EXTRA RINSEWith this option you can permanently have an extra rinse when you set a new programme. • To activate/deactivate this option press Spin and Quick at the same time until the indicator comes on/goes off. BEFORE FIRST USE 1. Put a small quantity of detergent in the compartm...

Page 12 - HINTS AND TIPS

CANCELLING A RUNNING PROGRAMME 1. Turn the programme knob to position to cancel the programme and to deactivate the appliance. 2. Turn the programme knob again to activate the appliance. Now, you can set a new washing programme. Before starting the new programme the appliance could drain the water. ...

Page 13 - CARE AND CLEANING

• A very small load can cause balance problems with the spin phase. If this occurs, adjust manually the items in the tub and start the spin phase again. STUBBORN STAINSFor some stains, water and detergent is not sufficient.We recommend that you remove these stains before you put the items in the app...

Page 15 - TROUBLESHOOTING

TROUBLESHOOTING WARNING! Refer to Safety chapters. INTRODUCTIONThe start of the appliance does not occur or it stops during operation.First try to find a solution to the problem (refer to the table). If not, contact the Authorised Service Centre.With some problems, the acoustic signals operate. The ...

Page 16 - TECHNICAL DATA

Problem Possible solution There is water on the floor. • Make sure that the couplings of the water hoses are tight and there is not water leakages. • Make sure that the inlet hose and/or the drain hose have no dam- ages. • Make sure you use the correct detergent and the correct quantity of it. You c...

Page 17 - ENVIRONMENT CONCERNS

Energy Efficiency Class A+++ Spin Speed Maximum 1200 rpm (ZWF81240W) 1400 rpm (ZWF81440W) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the enviro...