Zanussi ZWF71440W User Manual - Free PDF Download

Page 3 - SAFETY INSTRUCTIONS

– areas for communal use in blocks of flats or in launderettes. • Do not exceed the maximum load of 7 kg (refer to the "Programme chart" chapter). • The operating water pressure at the water entry point from the outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa). • The ...

Page 5 - PRODUCT DESCRIPTION

PRODUCT DESCRIPTION APPLIANCE OVERVIEW 1 2 3 5 6 4 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Feet for levelling the appliance INSTALLATION ON SUSPENDED FLOORINGSuspended wooden floors are particularly susceptible to vibration.To limit vibration we recommend placi...

Page 6 - EASY START

EASY START SPECIAL FEATURESYour new washing machine meets all modern requirements for an effective treatment of laundry with low water, energy and detergent consumption and will care for fabrics.This appliance is designed with a self cleaning draining system, allowing light fluff fibers that fall of...

Page 7 - PROGRAMME CHART

PROGRAMME CHART Programme Temperature range Maximum load Reference spin speed Programme description (Type of load and soil level) Cotton 90°C - Cold 7 kg 1400 rpm White cotton and coloured cotton. Normal, heavy and light soil. Cotton Eco 1) 60°C - 40°C 7 kg 1400 rpm White cotton and fast-coloured co...

Page 9 - CONSUMPTION VALUES

Programme Quick 1) Delay Start 30' @ 30° ■ ■ 1) When you set the Quick option, we recommend that you decrease the quantity of the laundry. It is pos- sible to keep the full load but the washing results can be unsatisfactory. Recommended load: cotton: 3,5 kg, synthetics and delicates: 1,5 kg. CONSUMP...

Page 10 - OPTIONS

Programmes Load (kg) Energy con- sumption (kWh) Water con- sumption (li- tre) Approximate programme duration (mi- nutes) Remaining moisture (%) 1) Standard 40°C cot-ton 3,5 0,59 36 189 52 1) At the end of spin phase. 2) Not available for some models. Off Mode (W) Left On Mode (W) 0.48 0.48 The infor...

Page 13 - HINTS AND TIPS

CANCELLING A RUNNING PROGRAMME 1. Turn the programme knob to position to cancel the programme and to deactivate the appliance. 2. Turn the programme knob again to activate the appliance. Now, you can set a new washing programme. Before starting the new programme the appliance could drain the water. ...

Page 14 - CARE AND CLEANING

delicate items (e.g. underwired bras, belts, tights, etc. ). • A very small load can cause balance problems with the spin phase. If this occurs, adjust manually the items in the tub and start the spin phase again. STUBBORN STAINSFor some stains, water and detergent is not sufficient.We recommend tha...

Page 16 - TROUBLESHOOTING

TROUBLESHOOTING WARNING! Refer to Safety chapters. INTRODUCTIONThe start of the appliance does not occur or it stops during operation.First try to find a solution to the problem (refer to the table). If not, contact the Authorised Service Centre.With some problems, the acoustic signals operate. The ...

Page 17 - TECHNICAL DATA

Problem Possible solution The spin phase does not operate or the washing cy- cle lasts longer than usual- ly. • Set the spin programme. • Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems. • If above mentioned solutions do not help, c...

Page 18 - PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION

Water supply pressure 1) Minimum Maximum 0.5 bar (0.05 MPa) 8 bar (0.8 MPa) Water supply 2) Cold water Maximum Load Cotton 7 kg Energy Efficiency Class A+++ Spin Speed Maximum spin speed 1351 rpm 1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cann...

Page 19 - ENVIRONMENTAL CONCERNS

The 'standard 60 °C cotton programme' and the 'standard 40 °C cotton programme' are the standard washing programmes to which the information in the label and the fiche relates, these programmes are suitable to clean normally soiled cotton laundry and they are the most efficient in terms of combined ...