Zanussi ZDV12003FA- User Manual

Page 3 - SAFETY INSTRUCTIONS

• Do not keep the appliance door open without supervision to prevent to fall on it. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not use water spray and steam to clean the appliance. • The ventilation openings in the base (if applicable) mu...

Page 5 - EASY START; PROGRAMMES

EASY START 4 3 2 1 1 On/off button 2 Programme indicators 3 Indicators 4 Programme button INDICATORS End indicator.Salt indicator. It is always off while the programme operates. PROGRAMMES Programme Degree of soil Type of load Programme phases Consumption values 1) Duration (min) Energy (kWh) Water ...

Page 6 - SETTINGS

Programme Degree of soil Type of load Programme phases Consumption values 1) Duration (min) Energy (kWh) Water (l) 4) All • Prewash 14 0.1 4 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 2) With thi...

Page 8 - BEFORE FIRST USE

German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Water softener level 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 <0.7 < 5 1 2) 1) Factory setting 2) Do not use salt at this level. ACTIVATING THE ACOUSTIC SIGNAL FOR THE END OF PROGRAMME By de...

Page 9 - DAILY USE

ADDING SALT Before first use put one litre of water in the salt container.Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. ADDING RINSE AID 2 1 1 2 3 4 A 2 1 The rinse aid helps to dry the di...

Page 11 - HINTS AND TIPS

HINTS AND TIPS GENERALThe following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment.• Remove larger residues of food from the dishes into the waste bin. • Do not pre-rinse dishes by hand. When needed, use the prewash programme (if available...

Page 12 - CARE AND CLEANING

• The programme is applicable for the type of load and for the degree of soil. • The correct quantity of detergent is used. UNLOADING THE BASKETS1. Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged. 2. First remove items from the lower basket, then ...

Page 13 - TROUBLESHOOTING

• To maintain the performance of your appliance at its best, we recommend to use monthly a specific cleaning product for dishwashers. Follow carefully the instructions on the packaging of the product. TROUBLESHOOTING If the appliance does not start or it stops during operation, before you contact an...

Page 15 - TECHNICAL INFORMATION

Problem Possible cause and solution The dishes are wet. • The programme does not have a drying phase or has a drying phase with low temperature. • The rinse aid dispenser is empty. • The quality of the rinse aid can be the cause. • The quality of the multi-tablets can be the cause. Try a differ- ent...

Page 16 - ENVIRONMENT CONCERNS

Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 9 Power consumption Left-on mode (W) 0.50 Power consumption Off-mode (W) 0.50 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use...

Zanussi ZDV12003FA- User Manual

Table of Contents:

Summary

Other Zanussi Models